mirror of
https://github.com/maduce/fosscad-repo.git
synced 2024-09-19 16:45:13 -04:00
47 lines
2.2 KiB
Markdown
47 lines
2.2 KiB
Markdown
|
# REVENANT
|
||
|
|
Fosscad
|
||
|
|
#### Author
|
||
|
|
Proteus
|
||
|
|
|
||
|
|
#### Version
|
||
|
|
1.1 (FIRST RELEASE)
|
||
|
|
|
||
|
|
#### Changelog
|
||
|
|
* Added sights
|
||
|
|
* Angled ridge
|
||
|
|
|
||
|
|
#### Caliber
|
||
|
|
.22LR
|
||
|
|
|
||
|
|
#### Description
|
||
|
|
This pistol is designed to be lightweight, small, and easy to print without taking too much time. It currently weighs around 150g
|
||
|
|
fully assembled without ammunition, excluding the 3.7oz of steel required for the U.S.
|
||
|
|
|
||
|
|
#### Assembly
|
||
|
|
Print out Striker, Trigger, Barrel at 100% infill with no supports. Give the barrel acetone vapor treatment.
|
||
|
|
Print out Frame_L and Frame_R with supports, flat at 100% infill.
|
||
|
|
Print out three Pins, 100% infill.
|
||
|
|
Obtain a nail of suitable size and a spring for the striker.
|
||
|
|
Lay Frame_L on side, insert nail into firing pin. Ensure it does not stick out too much. Insert spring
|
||
|
|
around the guide post on the back of Frame_R. Place striker in Frame_R, ensure it slides correctly and catches on the ridge.
|
||
|
|
Attach Trigger to Frame_L with one of your Pins. Insert Barrel into slot on Frame_L. Load Barrel at this time. Place Frame_R
|
||
|
|
over Frame_L (You may want to transfer the striker to Frame_L now that you have tested the spring), and insert the other two
|
||
|
|
Pins.
|
||
|
|
|
||
|
|
#### To Fire
|
||
|
|
Pull the lever sticking out of the Striker all the way back and then press down so it catches on the groove. WARNING:
|
||
|
|
If you release it without pressing down the gun will fire. Ensure that the striker is caught on the ridge before releasing.
|
||
|
|
|
||
|
|
When ready to fire, pull the trigger. It will push the striker up above the angled ridge and send it into the firing pin.
|
||
|
|
|
||
|
|
#### SAFETY WARNING
|
||
|
|
DO NOT PULL BACK THE STRIKER/CATCH IT ON THE RIDGE UNTIL YOU ARE READY TO SHOOT. IT IS EXTREMELY EASY TO ACCIDENTALLY FIRE AT
|
||
|
|
THIS STAGE, SO DO NOT DO IT UNTIL YOU ARE READY. If you keep the striker up against the firing pin it is safe and will not accidentally fire.
|
||
|
|
|
||
|
|
For first test fire, do it remotely by pulling the trigger with a string. This will lower risk of injury.
|
||
|
|
|
||
|
|
#### Disclaimer
|
||
|
|
Follow all local laws. For U.S. residents a non-removable 3.7oz piece of steel must be added. Be aware of your local and federal
|
||
|
|
laws before assembling. In the state of CA this weapon is illegal as it is a "zipgun". For other states please check your laws.
|
||
|
|
|