mirror of
https://github.com/maduce/fosscad-repo.git
synced 2024-09-19 16:45:13 -04:00
40 lines
1.9 KiB
Markdown
40 lines
1.9 KiB
Markdown
|
# Aliamanu-Phobos AR-15 Lower Receiver
|
||
|
|
|
||
|
|
#### Author
|
||
|
|
ArmaDelite
|
||
|
|
|
||
|
|
#### Version
|
||
|
|
1.0
|
||
|
|
|
||
|
|
#### Description
|
||
|
|
The Aliamanu-Phobos AR-15 lower receiver design is inspired by the Phobos AR-15 lower receiver by Warfairy, the Vanguard JT AR-15 lower receiver by JT and the Vanguard AR-15 lower receiver by Shadowfall.
|
||
|
|
|
||
|
|
An Ambidextrous safety cutout was added at the suggestion of Crysys. A bolt catch assembly from Vanguard JT receiver was also kept while integrating a reinforced Phobos style mag well.
|
||
|
|
|
||
|
|
**Note:** The lower in the renders is a right-hand safety selector cutout version. All other features are the same.
|
||
|
|
|
||
|
|
#### Instructions and Notes
|
||
|
|
|
||
|
|
Designs referenced in this project have been tested after printing on XYZPrinting Da Vinci 1.0.
|
||
|
|
|
||
|
|
* Test printed with 0.2mm layer height.
|
||
|
|
* Supports turned on. Solid in-fill.
|
||
|
|
* Lower should be built from trigger guard up, top of mag well parallel to printing bed.
|
||
|
|
* Keep printer in enclosed environment to minimize temperature fluctuation and ABS shrinkage.
|
||
|
|
* Long support material parallel to the lower's length is HIGHLY prone to warping and not recommended.
|
||
|
|
* **FOR GLASS HEATED BED:** If adhesion of supports to bed fails, try applying 3M Scotch masking tape firmly to bed.
|
||
|
|
Apply stick glue (decent) or dissolved ABS acetone slurry (best but toxic) onto masking tape surface after application.
|
||
|
|
* Final sanding of fire control group cavity to fit may be necessary due to shrinking.
|
||
|
|
|
||
|
|
|
||
|
|
#### Author's Notes
|
||
|
|
For the preservation and perpetuation of the 2nd amendment of the US Constitution and self defense rights for people around the world.
|
||
|
|
|
||
|
|
Special thanks to JT, WarFairy, Shadowfall, Crysys, Duces and the support of others in FOSSCAD community.
|
||
|
|
|
||
|
|
Feel free to update, modify and redesign this lower as you see fit. Includes ambidextrous and right-hand safety cutout versions.
|
||
|
|
|
||
|
|
Come and make it!
|
||
|
|
|
||
|
|
** Twitter: ** @ArmaDelite
|