mirror of
https://github.com/maduce/fosscad-repo.git
synced 2024-09-19 08:36:29 -04:00
Adding Revenant Pistol version 1.1 (first release) by Proteus.
This commit is contained in:
ma duce
parent
9c1940cff0
commit
010fffd9d4
46
Firearms/Revenant_Pistol_v1.1-Proteus/README.md
Normal file
46
Firearms/Revenant_Pistol_v1.1-Proteus/README.md
Normal file
@ -0,0 +1,46 @@
|
||||
# REVENANT
|
||||
Fosscad
|
||||
#### Author
|
||||
Proteus
|
||||
|
||||
#### Version
|
||||
1.1 (FIRST RELEASE)
|
||||
|
||||
#### Changelog
|
||||
* Added sights
|
||||
* Angled ridge
|
||||
|
||||
#### Caliber
|
||||
.22LR
|
||||
|
||||
#### Description
|
||||
This pistol is designed to be lightweight, small, and easy to print without taking too much time. It currently weighs around 150g
|
||||
fully assembled without ammunition, excluding the 3.7oz of steel required for the U.S.
|
||||
|
||||
#### Assembly
|
||||
Print out Striker, Trigger, Barrel at 100% infill with no supports. Give the barrel acetone vapor treatment.
|
||||
Print out Frame_L and Frame_R with supports, flat at 100% infill.
|
||||
Print out three Pins, 100% infill.
|
||||
Obtain a nail of suitable size and a spring for the striker.
|
||||
Lay Frame_L on side, insert nail into firing pin. Ensure it does not stick out too much. Insert spring
|
||||
around the guide post on the back of Frame_R. Place striker in Frame_R, ensure it slides correctly and catches on the ridge.
|
||||
Attach Trigger to Frame_L with one of your Pins. Insert Barrel into slot on Frame_L. Load Barrel at this time. Place Frame_R
|
||||
over Frame_L (You may want to transfer the striker to Frame_L now that you have tested the spring), and insert the other two
|
||||
Pins.
|
||||
|
||||
#### To Fire
|
||||
Pull the lever sticking out of the Striker all the way back and then press down so it catches on the groove. WARNING:
|
||||
If you release it without pressing down the gun will fire. Ensure that the striker is caught on the ridge before releasing.
|
||||
|
||||
When ready to fire, pull the trigger. It will push the striker up above the angled ridge and send it into the firing pin.
|
||||
|
||||
#### SAFETY WARNING
|
||||
DO NOT PULL BACK THE STRIKER/CATCH IT ON THE RIDGE UNTIL YOU ARE READY TO SHOOT. IT IS EXTREMELY EASY TO ACCIDENTALLY FIRE AT
|
||||
THIS STAGE, SO DO NOT DO IT UNTIL YOU ARE READY. If you keep the striker up against the firing pin it is safe and will not accidentally fire.
|
||||
|
||||
For first test fire, do it remotely by pulling the trigger with a string. This will lower risk of injury.
|
||||
|
||||
#### Disclaimer
|
||||
Follow all local laws. For U.S. residents a non-removable 3.7oz piece of steel must be added. Be aware of your local and federal
|
||||
laws before assembling. In the state of CA this weapon is illegal as it is a "zipgun". For other states please check your laws.
|
||||
|
||||
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unammed_6.jpg
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unammed_6.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 171 KiB |
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_1.jpg
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_1.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 389 KiB |
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_2.jpg
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_2.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 217 KiB |
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_3.jpg
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_3.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 198 KiB |
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_4.jpg
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_4.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 184 KiB |
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_5.jpg
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_5.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 162 KiB |
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_scale.jpg
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/Renders/unnamed_scale.jpg
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 181 KiB |
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/barrel_22lr.sldprt
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/barrel_22lr.sldprt
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/finalassm.sldasm
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/finalassm.sldasm
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/frame_l.sldprt
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/frame_l.sldprt
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/frame_r.sldprt
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/frame_r.sldprt
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/pin.sldprt
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/pin.sldprt
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/striker.sldprt
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/striker.sldprt
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/trigger.sldprt
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/SLDPRT/trigger.sldprt
Normal file
Binary file not shown.
7127
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/frame_l.step
Normal file
7127
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/frame_l.step
Normal file
File diff suppressed because it is too large
Load Diff
3511
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/frame_r.step
Normal file
3511
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/frame_r.step
Normal file
File diff suppressed because it is too large
Load Diff
270
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/pin.step
Normal file
270
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/pin.step
Normal file
@ -0,0 +1,270 @@
|
||||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP214' ),
|
||||
'1' );
|
||||
FILE_NAME ('pin.STEP',
|
||||
'2014-01-22T21:35:13',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6899999999999998400, 0.0000000000000000000 ) ) ;
|
||||
#2 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#3 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#4 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#5 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#6 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #182 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #185, #2, #99 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#7 = ORIENTED_EDGE ( 'NONE', *, *, #101, .T. ) ;
|
||||
#8 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #51 ) ) ;
|
||||
#9 = VECTOR ( 'NONE', #34, 39.37007874015748100 ) ;
|
||||
#10 = EDGE_CURVE ( 'NONE', #166, #30, #183, .T. ) ;
|
||||
#11 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 1.224646799147353200E-016 ) ) ;
|
||||
#12 = EDGE_LOOP ( 'NONE', ( #44, #91, #36, #81 ) ) ;
|
||||
#13 = CLOSED_SHELL ( 'NONE', ( #93, #55, #112, #77, #237, #19, #90, #202 ) ) ;
|
||||
#14 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6999999999999999600, -0.07499999999999998300 ) ) ;
|
||||
#15 =( CONVERSION_BASED_UNIT ( 'INCH', #109 ) LENGTH_UNIT ( ) NAMED_UNIT ( #5 ) );
|
||||
#16 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ;
|
||||
#17 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#18 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#19 = ADVANCED_FACE ( 'NONE', ( #218 ), #67, .F. ) ;
|
||||
#20 = SURFACE_SIDE_STYLE ('',( #165 ) ) ;
|
||||
#21 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #135 ) ;
|
||||
#22 = ORIENTED_EDGE ( 'NONE', *, *, #70, .T. ) ;
|
||||
#23 =( CONVERSION_BASED_UNIT ( 'INCH', #194 ) LENGTH_UNIT ( ) NAMED_UNIT ( #163 ) );
|
||||
#24 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#25 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #136 );
|
||||
#26 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
|
||||
#27 = VERTEX_POINT ( 'NONE', #150 ) ;
|
||||
#28 = FACE_OUTER_BOUND ( 'NONE', #222, .T. ) ;
|
||||
#29 = EDGE_CURVE ( 'NONE', #228, #30, #214, .T. ) ;
|
||||
#30 = VERTEX_POINT ( 'NONE', #49 ) ;
|
||||
#31 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.01000000000000003000, 0.0000000000000000000 ) ) ;
|
||||
#32 = ORIENTED_EDGE ( 'NONE', *, *, #122, .T. ) ;
|
||||
#33 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ;
|
||||
#34 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#35 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#36 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ;
|
||||
#37 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #236, #216 ) ;
|
||||
#38 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
|
||||
#39 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#40 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#41 = EDGE_LOOP ( 'NONE', ( #160, #33, #248, #198 ) ) ;
|
||||
#42 = FILL_AREA_STYLE ('',( #114 ) ) ;
|
||||
#43 = CIRCLE ( 'NONE', #157, 0.07499999999999998300 ) ;
|
||||
#44 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ;
|
||||
#45 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #105, #229 ) ;
|
||||
#46 = EDGE_CURVE ( 'NONE', #27, #228, #73, .T. ) ;
|
||||
#47 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #15, 'distance_accuracy_value', 'NONE');
|
||||
#48 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#49 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147200E-018, 0.01000000000000003000, 0.07499999999999998300 ) ) ;
|
||||
#50 = FILL_AREA_STYLE ('',( #233 ) ) ;
|
||||
#51 = STYLED_ITEM ( 'NONE', ( #84 ), #208 ) ;
|
||||
#52 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 1.224646799147353200E-016 ) ) ;
|
||||
#53 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#54 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#55 = ADVANCED_FACE ( 'NONE', ( #173 ), #203, .T. ) ;
|
||||
#56 = TOROIDAL_SURFACE ( 'NONE', #37, 0.06499999999999998800, 0.01000000000000000000 ) ;
|
||||
#57 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#58 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #201, #69 ) ;
|
||||
#59 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6899999999999998400, 0.06499999999999998800 ) ) ;
|
||||
#60 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#61 = SURFACE_STYLE_USAGE ( .BOTH. , #79 ) ;
|
||||
#62 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #47 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #15, #107, #252 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#63 = COLOUR_RGB ( '',1.000000000000000000, 0.9333333333333333500, 0.1333333333333333300 ) ;
|
||||
#64 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#65 = TOROIDAL_SURFACE ( 'NONE', #213, 0.06499999999999998800, 0.01000000000000000000 ) ;
|
||||
#66 = STYLED_ITEM ( 'NONE', ( #190 ), #118 ) ;
|
||||
#67 = PLANE ( 'NONE', #83 ) ;
|
||||
#68 = DIRECTION ( 'NONE', ( 1.224646799147353900E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#69 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#70 = EDGE_CURVE ( 'NONE', #87, #100, #119, .T. ) ;
|
||||
#71 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#72 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#73 = CIRCLE ( 'NONE', #131, 0.06499999999999998800 ) ;
|
||||
#74 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#75 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#76 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#77 = ADVANCED_FACE ( 'NONE', ( #78 ), #125, .T. ) ;
|
||||
#78 = FACE_OUTER_BOUND ( 'NONE', #205, .T. ) ;
|
||||
#79 = SURFACE_SIDE_STYLE ('',( #140 ) ) ;
|
||||
#80 = ORIENTED_EDGE ( 'NONE', *, *, #101, .F. ) ;
|
||||
#81 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ;
|
||||
#82 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #51 ), #6 ) ;
|
||||
#83 = AXIS2_PLACEMENT_3D ( 'NONE', #48, #64, #106 ) ;
|
||||
#84 = PRESENTATION_STYLE_ASSIGNMENT (( #61 ) ) ;
|
||||
#85 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #23, 'distance_accuracy_value', 'NONE');
|
||||
#86 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#87 = VERTEX_POINT ( 'NONE', #196 ) ;
|
||||
#88 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#89 = EDGE_CURVE ( 'NONE', #87, #166, #225, .T. ) ;
|
||||
#90 = ADVANCED_FACE ( 'NONE', ( #156 ), #65, .T. ) ;
|
||||
#91 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;
|
||||
#92 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#93 = ADVANCED_FACE ( 'NONE', ( #28 ), #56, .T. ) ;
|
||||
#94 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ;
|
||||
#95 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#96 = TOROIDAL_SURFACE ( 'NONE', #58, 0.06499999999999998800, 0.01000000000000000000 ) ;
|
||||
#97 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #85 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #23, #240, #40 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#98 = ORIENTED_EDGE ( 'NONE', *, *, #212, .F. ) ;
|
||||
#99 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#100 = VERTEX_POINT ( 'NONE', #108 ) ;
|
||||
#101 = EDGE_CURVE ( 'NONE', #228, #27, #244, .T. ) ;
|
||||
#102 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
|
||||
#103 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
|
||||
#104 = FACE_OUTER_BOUND ( 'NONE', #41, .T. ) ;
|
||||
#105 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#107 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#108 = CARTESIAN_POINT ( 'NONE', ( 8.572527594031470400E-018, 0.6999999999999999600, -0.06499999999999998800 ) ) ;
|
||||
#109 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #110 );
|
||||
#110 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#112 = ADVANCED_FACE ( 'NONE', ( #104 ), #170, .T. ) ;
|
||||
#113 = CIRCLE ( 'NONE', #154, 0.06499999999999998800 ) ;
|
||||
#114 = FILL_AREA_STYLE_COLOUR ( '', #241 ) ;
|
||||
#115 = PRODUCT_CONTEXT ( 'NONE', #209, 'mechanical' ) ;
|
||||
#116 = SHAPE_DEFINITION_REPRESENTATION ( #120, #208 ) ;
|
||||
#117 = EDGE_CURVE ( 'NONE', #226, #100, #113, .T. ) ;
|
||||
#118 = MANIFOLD_SOLID_BREP ( 'Fillet1', #13 ) ;
|
||||
#119 = CIRCLE ( 'NONE', #126, 0.009999999999999995000 ) ;
|
||||
#120 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #174 ) ;
|
||||
#121 = EDGE_LOOP ( 'NONE', ( #7, #16 ) ) ;
|
||||
#122 = EDGE_CURVE ( 'NONE', #87, #129, #177, .T. ) ;
|
||||
#123 = CIRCLE ( 'NONE', #247, 0.009999999999999995000 ) ;
|
||||
#124 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#125 = CYLINDRICAL_SURFACE ( 'NONE', #210, 0.07499999999999998300 ) ;
|
||||
#126 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #11, #172 ) ;
|
||||
#127 = CARTESIAN_POINT ( 'NONE', ( 7.960204194457793600E-018, 0.6899999999999998400, -0.06499999999999998800 ) ) ;
|
||||
#128 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#129 = VERTEX_POINT ( 'NONE', #253 ) ;
|
||||
#130 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147200E-018, 0.6899999999999998400, 0.07499999999999998300 ) ) ;
|
||||
#131 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #145, #215 ) ;
|
||||
#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#133 = CIRCLE ( 'NONE', #204, 0.06499999999999998800 ) ;
|
||||
#134 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ;
|
||||
#135 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#136 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#137 = PLANE ( 'NONE', #227 ) ;
|
||||
#138 = AXIS2_PLACEMENT_3D ( 'NONE', #251, #128, #18 ) ;
|
||||
#139 = ORIENTED_EDGE ( 'NONE', *, *, #223, .F. ) ;
|
||||
#140 = SURFACE_STYLE_FILL_AREA ( #42 ) ;
|
||||
#141 = EDGE_CURVE ( 'NONE', #100, #226, #133, .T. ) ;
|
||||
#142 = VECTOR ( 'NONE', #179, 39.37007874015748100 ) ;
|
||||
#143 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ;
|
||||
#144 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #66 ) ) ;
|
||||
#145 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#146 = CIRCLE ( 'NONE', #250, 0.07499999999999998300 ) ;
|
||||
#147 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ;
|
||||
#148 = ORIENTED_EDGE ( 'NONE', *, *, #70, .F. ) ;
|
||||
#149 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.01000000000000003000, 0.06499999999999998800 ) ) ;
|
||||
#150 = CARTESIAN_POINT ( 'NONE', ( 8.572527594031470400E-018, 0.0000000000000000000, -0.06499999999999998800 ) ) ;
|
||||
#151 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.01000000000000003000, 0.0000000000000000000 ) ) ;
|
||||
#152 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147200E-018, 0.6999999999999999600, 0.07499999999999998300 ) ) ;
|
||||
#153 = FACE_OUTER_BOUND ( 'NONE', #168, .T. ) ;
|
||||
#154 = AXIS2_PLACEMENT_3D ( 'NONE', #38, #17, #72 ) ;
|
||||
#155 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6999999999999999600, 0.06499999999999998800 ) ) ;
|
||||
#156 = FACE_OUTER_BOUND ( 'NONE', #231, .T. ) ;
|
||||
#157 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #220, #161 ) ;
|
||||
#158 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #52, #68 ) ;
|
||||
#159 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6899999999999998400, 0.0000000000000000000 ) ) ;
|
||||
#160 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
|
||||
#161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#162 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#163 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#164 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #75, #60 ) ;
|
||||
#165 = SURFACE_STYLE_FILL_AREA ( #50 ) ;
|
||||
#166 = VERTEX_POINT ( 'NONE', #130 ) ;
|
||||
#167 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #135, 'design' ) ;
|
||||
#168 = EDGE_LOOP ( 'NONE', ( #148, #139, #246, #94 ) ) ;
|
||||
#169 = EDGE_CURVE ( 'NONE', #27, #129, #189, .T. ) ;
|
||||
#170 = CYLINDRICAL_SURFACE ( 'NONE', #138, 0.07499999999999998300 ) ;
|
||||
#171 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#172 = DIRECTION ( 'NONE', ( 1.224646799147353900E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#173 = FACE_OUTER_BOUND ( 'NONE', #12, .T. ) ;
|
||||
#174 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #186, #167 ) ;
|
||||
#175 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#176 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6899999999999998400, 0.0000000000000000000 ) ) ;
|
||||
#177 = LINE ( 'NONE', #14, #142 ) ;
|
||||
#178 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #35, #132 ) ;
|
||||
#179 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#180 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#182 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #185, 'distance_accuracy_value', 'NONE');
|
||||
#183 = LINE ( 'NONE', #152, #9 ) ;
|
||||
#184 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.01000000000000003000, 0.0000000000000000000 ) ) ;
|
||||
#185 =( CONVERSION_BASED_UNIT ( 'INCH', #25 ) LENGTH_UNIT ( ) NAMED_UNIT ( #74 ) );
|
||||
#186 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #221, .NOT_KNOWN. ) ;
|
||||
#187 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ;
|
||||
#188 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #53, #239 ) ;
|
||||
#189 = CIRCLE ( 'NONE', #158, 0.009999999999999995000 ) ;
|
||||
#190 = PRESENTATION_STYLE_ASSIGNMENT (( #235 ) ) ;
|
||||
#191 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #39, #181 ) ;
|
||||
#192 = ORIENTED_EDGE ( 'NONE', *, *, #193, .T. ) ;
|
||||
#193 = EDGE_CURVE ( 'NONE', #129, #30, #207, .T. ) ;
|
||||
#194 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #57 );
|
||||
#195 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
|
||||
#196 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6899999999999998400, -0.07499999999999998300 ) ) ;
|
||||
#197 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #221 ) ) ;
|
||||
#198 = ORIENTED_EDGE ( 'NONE', *, *, #122, .F. ) ;
|
||||
#199 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
|
||||
#200 = CARTESIAN_POINT ( 'NONE', ( 7.960204194457793600E-018, 0.01000000000000003000, -0.06499999999999998800 ) ) ;
|
||||
#201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#202 = ADVANCED_FACE ( 'NONE', ( #153 ), #96, .T. ) ;
|
||||
#203 = TOROIDAL_SURFACE ( 'NONE', #211, 0.06499999999999998800, 0.01000000000000000000 ) ;
|
||||
#204 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #180, #88 ) ;
|
||||
#205 = EDGE_LOOP ( 'NONE', ( #134, #234, #32, #192 ) ) ;
|
||||
#206 = EDGE_CURVE ( 'NONE', #30, #129, #146, .T. ) ;
|
||||
#207 = CIRCLE ( 'NONE', #178, 0.07499999999999998300 ) ;
|
||||
#208 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'pin', ( #118, #164 ), #97 ) ;
|
||||
#209 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#210 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #124, #86 ) ;
|
||||
#211 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #249, #171 ) ;
|
||||
#212 = EDGE_CURVE ( 'NONE', #166, #226, #123, .T. ) ;
|
||||
#213 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #95, #92 ) ;
|
||||
#214 = CIRCLE ( 'NONE', #45, 0.009999999999999995000 ) ;
|
||||
#215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#217 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.01000000000000003000, 0.0000000000000000000 ) ) ;
|
||||
#218 = FACE_OUTER_BOUND ( 'NONE', #121, .T. ) ;
|
||||
#219 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6899999999999998400, 0.0000000000000000000 ) ) ;
|
||||
#220 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#221 = PRODUCT ( 'pin', 'pin', '', ( #115 ) ) ;
|
||||
#222 = EDGE_LOOP ( 'NONE', ( #195, #22, #238, #98 ) ) ;
|
||||
#223 = EDGE_CURVE ( 'NONE', #166, #87, #43, .T. ) ;
|
||||
#224 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.06499999999999998800 ) ) ;
|
||||
#225 = CIRCLE ( 'NONE', #191, 0.07499999999999998300 ) ;
|
||||
#226 = VERTEX_POINT ( 'NONE', #155 ) ;
|
||||
#227 = AXIS2_PLACEMENT_3D ( 'NONE', #26, #54, #111 ) ;
|
||||
#228 = VERTEX_POINT ( 'NONE', #224 ) ;
|
||||
#229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#230 = ORIENTED_EDGE ( 'NONE', *, *, #193, .F. ) ;
|
||||
#231 = EDGE_LOOP ( 'NONE', ( #187, #80, #147, #230 ) ) ;
|
||||
#232 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #66 ), #62 ) ;
|
||||
#233 = FILL_AREA_STYLE_COLOUR ( '', #63 ) ;
|
||||
#234 = ORIENTED_EDGE ( 'NONE', *, *, #223, .T. ) ;
|
||||
#235 = SURFACE_STYLE_USAGE ( .BOTH. , #20 ) ;
|
||||
#236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#237 = ADVANCED_FACE ( 'NONE', ( #245 ), #137, .T. ) ;
|
||||
#238 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
|
||||
#239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#240 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#241 = COLOUR_RGB ( '',1.000000000000000000, 0.9333333333333333500, 0.1333333333333333300 ) ;
|
||||
#242 = EDGE_LOOP ( 'NONE', ( #102, #143 ) ) ;
|
||||
#243 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #209 ) ;
|
||||
#244 = CIRCLE ( 'NONE', #188, 0.06499999999999998800 ) ;
|
||||
#245 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ;
|
||||
#246 = ORIENTED_EDGE ( 'NONE', *, *, #212, .T. ) ;
|
||||
#247 = AXIS2_PLACEMENT_3D ( 'NONE', #59, #162, #76 ) ;
|
||||
#248 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ;
|
||||
#249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#250 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #4, #24 ) ;
|
||||
#251 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.6999999999999999600, 0.0000000000000000000 ) ) ;
|
||||
#252 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#253 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.01000000000000003000, -0.07499999999999998300 ) ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
677
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/striker.step
Normal file
677
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/striker.step
Normal file
@ -0,0 +1,677 @@
|
||||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP214' ),
|
||||
'1' );
|
||||
FILE_NAME ('striker.STEP',
|
||||
'2014-01-22T21:34:01',
|
||||
( '' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = EDGE_LOOP ( 'NONE', ( #43, #479, #325, #546, #163, #430 ) ) ;
|
||||
#2 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
|
||||
#3 = CARTESIAN_POINT ( 'NONE', ( 0.7059469495372516800, 0.2649999999999997900, 0.2902209243125893300 ) ) ;
|
||||
#4 = LINE ( 'NONE', #45, #583 ) ;
|
||||
#5 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#6 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#7 = CARTESIAN_POINT ( 'NONE', ( 0.7798945267431974800, 0.2649999999999997900, -0.07584937629939572700 ) ) ;
|
||||
#8 = VERTEX_POINT ( 'NONE', #193 ) ;
|
||||
#9 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.7092893218813450800, 0.8458578643762688600 ) ) ;
|
||||
#10 = VERTEX_POINT ( 'NONE', #232 ) ;
|
||||
#11 = AXIS2_PLACEMENT_3D ( 'NONE', #580, #242, #36 ) ;
|
||||
#12 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#13 = LINE ( 'NONE', #641, #134 ) ;
|
||||
#14 = LINE ( 'NONE', #262, #396 ) ;
|
||||
#15 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ;
|
||||
#16 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, 0.4649999999999998000, 0.2562500000000001400 ) ) ;
|
||||
#17 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ;
|
||||
#18 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
|
||||
#19 = EDGE_CURVE ( 'NONE', #510, #266, #509, .T. ) ;
|
||||
#20 = LINE ( 'NONE', #117, #449 ) ;
|
||||
#21 = EDGE_CURVE ( 'NONE', #350, #99, #229, .T. ) ;
|
||||
#22 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.4678877179719978500, 0.8399999999999999700 ) ) ;
|
||||
#23 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ;
|
||||
#24 = CYLINDRICAL_SURFACE ( 'NONE', #239, 0.05000000000000001000 ) ;
|
||||
#25 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#26 = VERTEX_POINT ( 'NONE', #137 ) ;
|
||||
#27 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #291, #336, #46, #95 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 3.141592653589793100, 4.712388980384689700 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#28 = AXIS2_PLACEMENT_3D ( 'NONE', #561, #12, #138 ) ;
|
||||
#29 = VERTEX_POINT ( 'NONE', #481 ) ;
|
||||
#30 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#31 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.8499999999999999800 ) ) ;
|
||||
#32 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #433 );
|
||||
#33 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#34 = CARTESIAN_POINT ( 'NONE', ( 0.7798945267431974800, 0.4649999999999998000, -0.07584937629939572700 ) ) ;
|
||||
#35 = CARTESIAN_POINT ( 'NONE', ( -0.6509901951359279300, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
|
||||
#36 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#37 = ORIENTED_EDGE ( 'NONE', *, *, #503, .F. ) ;
|
||||
#38 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 3.073328992872299300E-015 ) ) ;
|
||||
#39 = VECTOR ( 'NONE', #184, 39.37007874015748100 ) ;
|
||||
#40 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.7299999999999998700, 0.4000000000000000200 ) ) ;
|
||||
#41 = CIRCLE ( 'NONE', #70, 0.1000000000000000200 ) ;
|
||||
#42 = EDGE_CURVE ( 'NONE', #124, #579, #488, .T. ) ;
|
||||
#43 = ORIENTED_EDGE ( 'NONE', *, *, #92, .T. ) ;
|
||||
#44 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#45 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, 0.4649999999999998000, 0.1375000000000002300 ) ) ;
|
||||
#46 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.7092893218813450800, 0.8458578643762688600 ) ) ;
|
||||
#47 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#48 = AXIS2_PLACEMENT_3D ( 'NONE', #484, #191, #497 ) ;
|
||||
#49 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#50 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#51 = EDGE_CURVE ( 'NONE', #467, #308, #501, .T. ) ;
|
||||
#52 = FACE_OUTER_BOUND ( 'NONE', #613, .T. ) ;
|
||||
#53 = ADVANCED_FACE ( 'NONE', ( #94 ), #374, .F. ) ;
|
||||
#54 = ORIENTED_EDGE ( 'NONE', *, *, #170, .F. ) ;
|
||||
#55 = ADVANCED_FACE ( 'NONE', ( #73 ), #238, .T. ) ;
|
||||
#56 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#57 = VECTOR ( 'NONE', #81, 39.37007874015748100 ) ;
|
||||
#58 = LINE ( 'NONE', #357, #611 ) ;
|
||||
#59 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ;
|
||||
#60 = EDGE_LOOP ( 'NONE', ( #139, #526, #317, #557 ) ) ;
|
||||
#61 = ORIENTED_EDGE ( 'NONE', *, *, #296, .F. ) ;
|
||||
#62 = EDGE_CURVE ( 'NONE', #271, #114, #458, .T. ) ;
|
||||
#63 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#64 = EDGE_CURVE ( 'NONE', #10, #467, #633, .T. ) ;
|
||||
#65 = DIRECTION ( 'NONE', ( 1.224646799147353000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#66 = AXIS2_PLACEMENT_3D ( 'NONE', #528, #472, #289 ) ;
|
||||
#67 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#68 = VECTOR ( 'NONE', #38, 39.37007874015748100 ) ;
|
||||
#69 = EDGE_CURVE ( 'NONE', #419, #122, #518, .T. ) ;
|
||||
#70 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #67, #219 ) ;
|
||||
#71 = LINE ( 'NONE', #564, #592 ) ;
|
||||
#72 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#73 = FACE_OUTER_BOUND ( 'NONE', #100, .T. ) ;
|
||||
#74 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#75 = EDGE_CURVE ( 'NONE', #579, #419, #198, .T. ) ;
|
||||
#76 = EDGE_LOOP ( 'NONE', ( #573, #414, #88, #202 ) ) ;
|
||||
#77 = ORIENTED_EDGE ( 'NONE', *, *, #51, .T. ) ;
|
||||
#78 = MANIFOLD_SOLID_BREP ( 'Fillet3', #522 ) ;
|
||||
#79 = CARTESIAN_POINT ( 'NONE', ( 0.5767003399721217800, -4.460595552154893600E-016, 0.1374999999999987300 ) ) ;
|
||||
#80 = AXIS2_PLACEMENT_3D ( 'NONE', #452, #506, #215 ) ;
|
||||
#81 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#82 = FACE_OUTER_BOUND ( 'NONE', #60, .T. ) ;
|
||||
#83 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.04999999999999996800, 0.8499999999999999800 ) ) ;
|
||||
#84 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #607, 'design' ) ;
|
||||
#85 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#86 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #383 ) ;
|
||||
#87 = AXIS2_PLACEMENT_3D ( 'NONE', #35, #425, #136 ) ;
|
||||
#88 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ;
|
||||
#89 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#90 = LINE ( 'NONE', #370, #68 ) ;
|
||||
#91 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.0000000000000000000, 0.8399999999999999700 ) ) ;
|
||||
#92 = EDGE_CURVE ( 'NONE', #495, #588, #314, .T. ) ;
|
||||
#93 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#94 = FACE_OUTER_BOUND ( 'NONE', #115, .T. ) ;
|
||||
#95 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
|
||||
#96 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#97 = EDGE_CURVE ( 'NONE', #10, #26, #27, .T. ) ;
|
||||
#98 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.4649999999999998000, 0.1375000000000002300 ) ) ;
|
||||
#99 = VERTEX_POINT ( 'NONE', #98 ) ;
|
||||
#100 = EDGE_LOOP ( 'NONE', ( #340, #250, #176, #494, #315, #278, #146, #201 ) ) ;
|
||||
#101 = ADVANCED_FACE ( 'NONE', ( #52, #524 ), #440, .T. ) ;
|
||||
#102 = FILL_AREA_STYLE ('',( #435 ) ) ;
|
||||
#103 = LINE ( 'NONE', #386, #345 ) ;
|
||||
#104 = ADVANCED_FACE ( 'NONE', ( #470 ), #456, .T. ) ;
|
||||
#105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#106 = FILL_AREA_STYLE ('',( #399 ) ) ;
|
||||
#107 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #200, 'distance_accuracy_value', 'NONE');
|
||||
#108 = EDGE_LOOP ( 'NONE', ( #165, #321, #220, #382 ) ) ;
|
||||
#109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#110 = EDGE_CURVE ( 'NONE', #460, #113, #196, .T. ) ;
|
||||
#111 = VERTEX_POINT ( 'NONE', #496 ) ;
|
||||
#112 = FACE_OUTER_BOUND ( 'NONE', #387, .T. ) ;
|
||||
#113 = VERTEX_POINT ( 'NONE', #388 ) ;
|
||||
#114 = VERTEX_POINT ( 'NONE', #591 ) ;
|
||||
#115 = EDGE_LOOP ( 'NONE', ( #37, #23, #59, #473 ) ) ;
|
||||
#116 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
|
||||
#117 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.797174393178824900E-017, -0.1000000000000000100 ) ) ;
|
||||
#118 = VECTOR ( 'NONE', #554, 39.37007874015748100 ) ;
|
||||
#119 = LINE ( 'NONE', #213, #631 ) ;
|
||||
#120 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.6799999999999998300, -0.1000000000000000100 ) ) ;
|
||||
#121 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #56, #109 ) ;
|
||||
#122 = VERTEX_POINT ( 'NONE', #300 ) ;
|
||||
#123 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, 0.2649999999999997900, 0.2562500000000001400 ) ) ;
|
||||
#124 = VERTEX_POINT ( 'NONE', #203 ) ;
|
||||
#125 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #400 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #599, #161, #267 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#126 = CIRCLE ( 'NONE', #253, 0.1000000000000000200 ) ;
|
||||
#127 = ORIENTED_EDGE ( 'NONE', *, *, #529, .F. ) ;
|
||||
#128 = CARTESIAN_POINT ( 'NONE', ( 0.7059469495372516800, -8.741274243243079300E-016, 0.2902209243125893300 ) ) ;
|
||||
#129 = EDGE_CURVE ( 'NONE', #588, #460, #618, .T. ) ;
|
||||
#130 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.4242987285365911200, 0.8499999999999999800 ) ) ;
|
||||
#131 = EDGE_LOOP ( 'NONE', ( #61, #615, #401, #513 ) ) ;
|
||||
#132 = ORIENTED_EDGE ( 'NONE', *, *, #567, .F. ) ;
|
||||
#133 = EDGE_CURVE ( 'NONE', #111, #124, #169, .T. ) ;
|
||||
#134 = VECTOR ( 'NONE', #147, 39.37007874015748100 ) ;
|
||||
#135 = VECTOR ( 'NONE', #6, 39.37007874015748100 ) ;
|
||||
#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9805806756909200000, -0.1961161351381845400 ) ) ;
|
||||
#137 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
|
||||
#138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#139 = ORIENTED_EDGE ( 'NONE', *, *, #491, .F. ) ;
|
||||
#140 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, 0.4649999999999998000, 0.2562500000000001400 ) ) ;
|
||||
#141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#142 = EDGE_CURVE ( 'NONE', #419, #111, #643, .T. ) ;
|
||||
#143 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.04999999999999987800, -0.1000000000000000100 ) ) ;
|
||||
#144 = LINE ( 'NONE', #123, #623 ) ;
|
||||
#145 = ADVANCED_FACE ( 'NONE', ( #575 ), #605, .T. ) ;
|
||||
#146 = ORIENTED_EDGE ( 'NONE', *, *, #632, .T. ) ;
|
||||
#147 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#148 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, -9.797174393178824900E-017, -0.1000000000000000100 ) ) ;
|
||||
#149 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #218, .NOT_KNOWN. ) ;
|
||||
#150 = ADVANCED_FACE ( 'NONE', ( #552 ), #259, .T. ) ;
|
||||
#151 = VERTEX_POINT ( 'NONE', #212 ) ;
|
||||
#152 = ORIENTED_EDGE ( 'NONE', *, *, #51, .F. ) ;
|
||||
#153 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#154 = FACE_OUTER_BOUND ( 'NONE', #371, .T. ) ;
|
||||
#155 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #33, #72 ) ;
|
||||
#156 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.4242987285365911200, 0.7499999999999998900 ) ) ;
|
||||
#157 = ADVANCED_FACE ( 'NONE', ( #542 ), #274, .F. ) ;
|
||||
#158 = EDGE_CURVE ( 'NONE', #114, #467, #519, .T. ) ;
|
||||
#159 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#160 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ;
|
||||
#161 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#162 = FACE_OUTER_BOUND ( 'NONE', #351, .T. ) ;
|
||||
#163 = ORIENTED_EDGE ( 'NONE', *, *, #568, .F. ) ;
|
||||
#164 = EDGE_CURVE ( 'NONE', #624, #415, #14, .T. ) ;
|
||||
#165 = ORIENTED_EDGE ( 'NONE', *, *, #521, .F. ) ;
|
||||
#166 = CARTESIAN_POINT ( 'NONE', ( 0.5767003399721217800, 0.4649999999999998000, 0.2374999999999987700 ) ) ;
|
||||
#167 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.2649999999999997900, 0.2562500000000001400 ) ) ;
|
||||
#168 = VECTOR ( 'NONE', #566, 39.37007874015748100 ) ;
|
||||
#169 = LINE ( 'NONE', #555, #508 ) ;
|
||||
#170 = EDGE_CURVE ( 'NONE', #113, #505, #418, .T. ) ;
|
||||
#171 = SURFACE_STYLE_FILL_AREA ( #102 ) ;
|
||||
#172 = AXIS2_PLACEMENT_3D ( 'NONE', #462, #364, #222 ) ;
|
||||
#173 = LINE ( 'NONE', #234, #263 ) ;
|
||||
#174 = VECTOR ( 'NONE', #511, 39.37007874015748100 ) ;
|
||||
#175 = AXIS2_PLACEMENT_3D ( 'NONE', #490, #197, #550 ) ;
|
||||
#176 = ORIENTED_EDGE ( 'NONE', *, *, #296, .T. ) ;
|
||||
#177 = ORIENTED_EDGE ( 'NONE', *, *, #42, .F. ) ;
|
||||
#178 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#179 = VECTOR ( 'NONE', #275, 39.37007874015748100 ) ;
|
||||
#180 = VECTOR ( 'NONE', #141, 39.37007874015748100 ) ;
|
||||
#181 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#182 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.4649999999999998000, 0.2562500000000001400 ) ) ;
|
||||
#183 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #284 ), #125 ) ;
|
||||
#184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -3.244069492476316800E-015 ) ) ;
|
||||
#185 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ;
|
||||
#186 = CARTESIAN_POINT ( 'NONE', ( -0.6509901951359279300, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
|
||||
#187 = EDGE_CURVE ( 'NONE', #122, #360, #516, .T. ) ;
|
||||
#188 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.0000000000000000000, 0.8399999999999999700 ) ) ;
|
||||
#189 = VECTOR ( 'NONE', #394, 39.37007874015748100 ) ;
|
||||
#190 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.4242987285365911200, 0.7499999999999998900 ) ) ;
|
||||
#191 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#192 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ;
|
||||
#193 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
|
||||
#194 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#195 = EDGE_CURVE ( 'NONE', #26, #495, #119, .T. ) ;
|
||||
#196 = CIRCLE ( 'NONE', #545, 0.05000000000000001000 ) ;
|
||||
#197 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#198 = LINE ( 'NONE', #644, #439 ) ;
|
||||
#199 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.6799999999999998300, 0.0000000000000000000 ) ) ;
|
||||
#200 =( CONVERSION_BASED_UNIT ( 'INCH', #532 ) LENGTH_UNIT ( ) NAMED_UNIT ( #306 ) );
|
||||
#201 = ORIENTED_EDGE ( 'NONE', *, *, #319, .T. ) ;
|
||||
#202 = ORIENTED_EDGE ( 'NONE', *, *, #536, .T. ) ;
|
||||
#203 = CARTESIAN_POINT ( 'NONE', ( 0.6311082432557060300, 0.4649999999999998000, 0.1535966028084420300 ) ) ;
|
||||
#204 = CYLINDRICAL_SURFACE ( 'NONE', #639, 0.1000000000000000200 ) ;
|
||||
#205 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #607 ) ;
|
||||
#206 = ADVANCED_FACE ( 'NONE', ( #412 ), #459, .F. ) ;
|
||||
#207 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ;
|
||||
#208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#209 = PRODUCT_CONTEXT ( 'NONE', #383, 'mechanical' ) ;
|
||||
#210 = EDGE_CURVE ( 'NONE', #360, #350, #385, .T. ) ;
|
||||
#211 = ADVANCED_FACE ( 'NONE', ( #560 ), #614, .T. ) ;
|
||||
#212 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.05000000000000001000, -0.1000000000000000100 ) ) ;
|
||||
#213 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.6799999999999998300, 0.0000000000000000000 ) ) ;
|
||||
#214 = VERTEX_POINT ( 'NONE', #312 ) ;
|
||||
#215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#216 = LINE ( 'NONE', #316, #179 ) ;
|
||||
#217 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#218 = PRODUCT ( 'striker', 'striker', '', ( #209 ) ) ;
|
||||
#219 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#220 = ORIENTED_EDGE ( 'NONE', *, *, #465, .F. ) ;
|
||||
#221 = ORIENTED_EDGE ( 'NONE', *, *, #268, .F. ) ;
|
||||
#222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -3.244069492476316800E-015 ) ) ;
|
||||
#223 = EDGE_CURVE ( 'NONE', #124, #29, #41, .T. ) ;
|
||||
#224 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
|
||||
#225 = ORIENTED_EDGE ( 'NONE', *, *, #319, .F. ) ;
|
||||
#226 = CIRCLE ( 'NONE', #420, 0.05000000000000001000 ) ;
|
||||
#227 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.6799999999999998300, -0.1000000000000000100 ) ) ;
|
||||
#228 = EDGE_CURVE ( 'NONE', #122, #285, #144, .T. ) ;
|
||||
#229 = LINE ( 'NONE', #327, #180 ) ;
|
||||
#230 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ;
|
||||
#231 = ORIENTED_EDGE ( 'NONE', *, *, #223, .T. ) ;
|
||||
#232 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
|
||||
#233 = VERTEX_POINT ( 'NONE', #120 ) ;
|
||||
#234 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, -4.460595552154893600E-016, 0.1374999999999987300 ) ) ;
|
||||
#235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#236 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.04999999999999996800, -0.1000000000000000100 ) ) ;
|
||||
#237 = LINE ( 'NONE', #338, #189 ) ;
|
||||
#238 = PLANE ( 'NONE', #367 ) ;
|
||||
#239 = AXIS2_PLACEMENT_3D ( 'NONE', #240, #586, #629 ) ;
|
||||
#240 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.6799999999999998300, 0.0000000000000000000 ) ) ;
|
||||
#241 = ORIENTED_EDGE ( 'NONE', *, *, #572, .F. ) ;
|
||||
#242 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#243 = EDGE_CURVE ( 'NONE', #624, #151, #562, .T. ) ;
|
||||
#244 = FACE_OUTER_BOUND ( 'NONE', #302, .T. ) ;
|
||||
#245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#246 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#247 = ORIENTED_EDGE ( 'NONE', *, *, #491, .T. ) ;
|
||||
#248 = PLANE ( 'NONE', #48 ) ;
|
||||
#249 = ADVANCED_FACE ( 'NONE', ( #469 ), #487, .T. ) ;
|
||||
#250 = ORIENTED_EDGE ( 'NONE', *, *, #465, .T. ) ;
|
||||
#251 =( CONVERSION_BASED_UNIT ( 'INCH', #32 ) LENGTH_UNIT ( ) NAMED_UNIT ( #612 ) );
|
||||
#252 = VERTEX_POINT ( 'NONE', #313 ) ;
|
||||
#253 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #178, #571 ) ;
|
||||
#254 = CARTESIAN_POINT ( 'NONE', ( 0.7257473812947276000, 0.4649999999999998000, 0.1922008095288493800 ) ) ;
|
||||
#255 = FACE_OUTER_BOUND ( 'NONE', #628, .T. ) ;
|
||||
#256 = VECTOR ( 'NONE', #416, 39.37007874015748100 ) ;
|
||||
#257 = VECTOR ( 'NONE', #398, 39.37007874015748100 ) ;
|
||||
#258 = EDGE_CURVE ( 'NONE', #369, #285, #58, .T. ) ;
|
||||
#259 = PLANE ( 'NONE', #121 ) ;
|
||||
#260 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#261 = ORIENTED_EDGE ( 'NONE', *, *, #158, .T. ) ;
|
||||
#262 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
|
||||
#263 = VECTOR ( 'NONE', #627, 39.37007874015748100 ) ;
|
||||
#264 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #218 ) ) ;
|
||||
#265 = VECTOR ( 'NONE', #344, 39.37007874015748100 ) ;
|
||||
#266 = VERTEX_POINT ( 'NONE', #318 ) ;
|
||||
#267 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#268 = EDGE_CURVE ( 'NONE', #233, #114, #71, .T. ) ;
|
||||
#269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#270 = ORIENTED_EDGE ( 'NONE', *, *, #563, .T. ) ;
|
||||
#271 = VERTEX_POINT ( 'NONE', #22 ) ;
|
||||
#272 = EDGE_CURVE ( 'NONE', #510, #460, #455, .T. ) ;
|
||||
#273 = FACE_OUTER_BOUND ( 'NONE', #365, .T. ) ;
|
||||
#274 = CYLINDRICAL_SURFACE ( 'NONE', #28, 0.2734644684100194200 ) ;
|
||||
#275 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#276 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'striker', ( #78, #331 ), #304 ) ;
|
||||
#277 = AXIS2_PLACEMENT_3D ( 'NONE', #578, #423, #74 ) ;
|
||||
#278 = ORIENTED_EDGE ( 'NONE', *, *, #529, .T. ) ;
|
||||
#279 = VECTOR ( 'NONE', #492, 39.37007874015748100 ) ;
|
||||
#280 = EDGE_CURVE ( 'NONE', #214, #369, #216, .T. ) ;
|
||||
#281 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ;
|
||||
#282 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ;
|
||||
#283 = ORIENTED_EDGE ( 'NONE', *, *, #620, .F. ) ;
|
||||
#284 = STYLED_ITEM ( 'NONE', ( #375 ), #276 ) ;
|
||||
#285 = VERTEX_POINT ( 'NONE', #167 ) ;
|
||||
#286 = SHAPE_DEFINITION_REPRESENTATION ( #451, #276 ) ;
|
||||
#287 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#288 = EDGE_CURVE ( 'NONE', #8, #10, #600, .T. ) ;
|
||||
#289 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#290 = EDGE_LOOP ( 'NONE', ( #283, #54, #282, #608 ) ) ;
|
||||
#291 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
|
||||
#292 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#293 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
|
||||
#294 = ORIENTED_EDGE ( 'NONE', *, *, #133, .F. ) ;
|
||||
#295 = SURFACE_STYLE_USAGE ( .BOTH. , #445 ) ;
|
||||
#296 = EDGE_CURVE ( 'NONE', #570, #505, #20, .T. ) ;
|
||||
#297 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#299 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#300 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, 0.2649999999999997900, 0.2562500000000001400 ) ) ;
|
||||
#301 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.04999999999999993300, 0.0000000000000000000 ) ) ;
|
||||
#302 = EDGE_LOOP ( 'NONE', ( #366, #192, #127, #293 ) ) ;
|
||||
#303 = ADVANCED_FACE ( 'NONE', ( #82 ), #204, .T. ) ;
|
||||
#304 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #358 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #251, #299, #441 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#305 = CIRCLE ( 'NONE', #517, 0.1000000000000000100 ) ;
|
||||
#306 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#308 = VERTEX_POINT ( 'NONE', #224 ) ;
|
||||
#309 = ORIENTED_EDGE ( 'NONE', *, *, #558, .T. ) ;
|
||||
#310 = EDGE_CURVE ( 'NONE', #271, #415, #126, .T. ) ;
|
||||
#311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#312 = CARTESIAN_POINT ( 'NONE', ( 0.5767003399721217800, 0.2649999999999997900, 0.1375000000000001200 ) ) ;
|
||||
#313 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
|
||||
#314 = LINE ( 'NONE', #647, #500 ) ;
|
||||
#315 = ORIENTED_EDGE ( 'NONE', *, *, #92, .F. ) ;
|
||||
#316 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, 0.2649999999999997900, 0.1375000000000001200 ) ) ;
|
||||
#317 = ORIENTED_EDGE ( 'NONE', *, *, #69, .F. ) ;
|
||||
#318 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.4678877179719978500, 0.8399999999999999700 ) ) ;
|
||||
#319 = EDGE_CURVE ( 'NONE', #308, #233, #226, .T. ) ;
|
||||
#320 = VECTOR ( 'NONE', #436, 39.37007874015748100 ) ;
|
||||
#321 = ORIENTED_EDGE ( 'NONE', *, *, #645, .F. ) ;
|
||||
#322 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#323 = PLANE ( 'NONE', #442 ) ;
|
||||
#324 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.6799999999999998300, -0.1000000000000000100 ) ) ;
|
||||
#325 = ORIENTED_EDGE ( 'NONE', *, *, #272, .F. ) ;
|
||||
#326 = ORIENTED_EDGE ( 'NONE', *, *, #567, .T. ) ;
|
||||
#327 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.4649999999999998000, 0.0000000000000000000 ) ) ;
|
||||
#328 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.4678877179719978500, 0.8399999999999999700 ) ) ;
|
||||
#329 = FACE_OUTER_BOUND ( 'NONE', #426, .T. ) ;
|
||||
#330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#331 = AXIS2_PLACEMENT_3D ( 'NONE', #89, #601, #405 ) ;
|
||||
#332 = ORIENTED_EDGE ( 'NONE', *, *, #223, .F. ) ;
|
||||
#333 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #85, #235 ) ;
|
||||
#334 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ;
|
||||
#335 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.04999999999999993300, -0.1000000000000000100 ) ) ;
|
||||
#336 = CARTESIAN_POINT ( 'NONE', ( -0.5792893218813453000, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
|
||||
#337 = ORIENTED_EDGE ( 'NONE', *, *, #210, .F. ) ;
|
||||
#338 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, -3.061616997868382400E-017, 0.4000000000000000200 ) ) ;
|
||||
#339 = ORIENTED_EDGE ( 'NONE', *, *, #457, .F. ) ;
|
||||
#340 = ORIENTED_EDGE ( 'NONE', *, *, #563, .F. ) ;
|
||||
#341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#342 = AXIS2_PLACEMENT_3D ( 'NONE', #520, #65, #413 ) ;
|
||||
#343 = ADVANCED_FACE ( 'NONE', ( #255 ), #323, .T. ) ;
|
||||
#344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#345 = VECTOR ( 'NONE', #587, 39.37007874015748100 ) ;
|
||||
#346 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, 0.2649999999999997900, 0.0000000000000000000 ) ) ;
|
||||
#347 = ORIENTED_EDGE ( 'NONE', *, *, #381, .T. ) ;
|
||||
#348 = CARTESIAN_POINT ( 'NONE', ( -0.2207106781186547700, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
|
||||
#349 = ADVANCED_FACE ( 'NONE', ( #329 ), #617, .T. ) ;
|
||||
#350 = VERTEX_POINT ( 'NONE', #182 ) ;
|
||||
#351 = EDGE_LOOP ( 'NONE', ( #207, #77, #421, #512 ) ) ;
|
||||
#352 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #284 ) ) ;
|
||||
#353 = SURFACE_SIDE_STYLE ('',( #437 ) ) ;
|
||||
#354 = VECTOR ( 'NONE', #410, 39.37007874015748100 ) ;
|
||||
#355 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.04999999999999996800, 0.0000000000000000000 ) ) ;
|
||||
#356 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #341, #49 ) ;
|
||||
#357 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.2649999999999997900, 0.0000000000000000000 ) ) ;
|
||||
#358 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #251, 'distance_accuracy_value', 'NONE');
|
||||
#359 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ;
|
||||
#360 = VERTEX_POINT ( 'NONE', #140 ) ;
|
||||
#361 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, -7.875405544235230000E-016, 0.2562499999999987600 ) ) ;
|
||||
#362 = COLOUR_RGB ( '',0.2941176470588235400, 0.2941176470588235400, 0.2941176470588235400 ) ;
|
||||
#363 = ORIENTED_EDGE ( 'NONE', *, *, #158, .F. ) ;
|
||||
#364 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -3.244069492476316800E-015, 1.000000000000000000 ) ) ;
|
||||
#365 = EDGE_LOOP ( 'NONE', ( #466, #261, #493, #160 ) ) ;
|
||||
#366 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ;
|
||||
#367 = AXIS2_PLACEMENT_3D ( 'NONE', #640, #44, #287 ) ;
|
||||
#368 = CYLINDRICAL_SURFACE ( 'NONE', #606, 0.1000000000000000200 ) ;
|
||||
#369 = VERTEX_POINT ( 'NONE', #530 ) ;
|
||||
#370 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, -7.875405544235230000E-016, 0.2562499999999987600 ) ) ;
|
||||
#371 = EDGE_LOOP ( 'NONE', ( #225, #152, #363, #221 ) ) ;
|
||||
#372 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.4242987285365911200, 0.7499999999999998900 ) ) ;
|
||||
#373 = PLANE ( 'NONE', #87 ) ;
|
||||
#374 = PLANE ( 'NONE', #11 ) ;
|
||||
#375 = PRESENTATION_STYLE_ASSIGNMENT (( #446 ) ) ;
|
||||
#376 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, -7.875405544235230000E-016, 0.2562499999999987600 ) ) ;
|
||||
#377 = VECTOR ( 'NONE', #574, 39.37007874015748100 ) ;
|
||||
#378 = VECTOR ( 'NONE', #424, 39.37007874015748100 ) ;
|
||||
#379 = ORIENTED_EDGE ( 'NONE', *, *, #572, .T. ) ;
|
||||
#380 = CARTESIAN_POINT ( 'NONE', ( 0.7059469495372516800, 0.4649999999999998000, 0.2902209243125893300 ) ) ;
|
||||
#381 = EDGE_CURVE ( 'NONE', #369, #99, #173, .T. ) ;
|
||||
#382 = ORIENTED_EDGE ( 'NONE', *, *, #243, .F. ) ;
|
||||
#383 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#384 = LINE ( 'NONE', #79, #39 ) ;
|
||||
#385 = LINE ( 'NONE', #16, #174 ) ;
|
||||
#386 = CARTESIAN_POINT ( 'NONE', ( -0.6509901951359279300, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
|
||||
#387 = EDGE_LOOP ( 'NONE', ( #337, #247, #177, #231, #17, #548 ) ) ;
|
||||
#388 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
|
||||
#389 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#390 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#391 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #208, #307 ) ;
|
||||
#392 = EDGE_LOOP ( 'NONE', ( #443, #489, #359, #281 ) ) ;
|
||||
#393 = ADVANCED_FACE ( 'NONE', ( #162 ), #428, .T. ) ;
|
||||
#394 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#395 = FACE_OUTER_BOUND ( 'NONE', #392, .T. ) ;
|
||||
#396 = VECTOR ( 'NONE', #311, 39.37007874015748100 ) ;
|
||||
#397 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.04999999999999993300, 0.0000000000000000000 ) ) ;
|
||||
#398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#399 = FILL_AREA_STYLE_COLOUR ( '', #362 ) ;
|
||||
#400 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #599, 'distance_accuracy_value', 'NONE');
|
||||
#401 = ORIENTED_EDGE ( 'NONE', *, *, #558, .F. ) ;
|
||||
#402 = ADVANCED_FACE ( 'NONE', ( #395 ), #534, .T. ) ;
|
||||
#403 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #454, #63 ) ;
|
||||
#404 = LINE ( 'NONE', #485, #279 ) ;
|
||||
#405 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#406 = STYLED_ITEM ( 'NONE', ( #553 ), #78 ) ;
|
||||
#407 = ORIENTED_EDGE ( 'NONE', *, *, #142, .T. ) ;
|
||||
#408 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#409 = ORIENTED_EDGE ( 'NONE', *, *, #457, .T. ) ;
|
||||
#410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#411 = ORIENTED_EDGE ( 'NONE', *, *, #310, .F. ) ;
|
||||
#412 = FACE_OUTER_BOUND ( 'NONE', #450, .T. ) ;
|
||||
#413 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.224646799147353000E-016, 0.0000000000000000000 ) ) ;
|
||||
#414 = ORIENTED_EDGE ( 'NONE', *, *, #381, .F. ) ;
|
||||
#415 = VERTEX_POINT ( 'NONE', #478 ) ;
|
||||
#416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 3.073328992872299300E-015 ) ) ;
|
||||
#417 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #107 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #200, #194, #390 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#418 = LINE ( 'NONE', #636, #135 ) ;
|
||||
#419 = VERTEX_POINT ( 'NONE', #576 ) ;
|
||||
#420 = AXIS2_PLACEMENT_3D ( 'NONE', #227, #471, #181 ) ;
|
||||
#421 = ORIENTED_EDGE ( 'NONE', *, *, #632, .F. ) ;
|
||||
#422 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #260 );
|
||||
#423 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#424 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1961161351381845700, 0.9805806756909201100 ) ) ;
|
||||
#426 = EDGE_LOOP ( 'NONE', ( #132, #339, #332, #294 ) ) ;
|
||||
#427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#428 = PLANE ( 'NONE', #277 ) ;
|
||||
#429 = LINE ( 'NONE', #2, #630 ) ;
|
||||
#430 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
|
||||
#431 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
|
||||
#432 = AXIS2_PLACEMENT_3D ( 'NONE', #34, #634, #540 ) ;
|
||||
#433 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#434 = ORIENTED_EDGE ( 'NONE', *, *, #310, .T. ) ;
|
||||
#435 = FILL_AREA_STYLE_COLOUR ( '', #565 ) ;
|
||||
#436 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#437 = SURFACE_STYLE_FILL_AREA ( #106 ) ;
|
||||
#438 = ADVANCED_FACE ( 'NONE', ( #154 ), #24, .T. ) ;
|
||||
#439 = VECTOR ( 'NONE', #544, 39.37007874015748100 ) ;
|
||||
#440 = PLANE ( 'NONE', #175 ) ;
|
||||
#441 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#442 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #25, #498 ) ;
|
||||
#443 = ORIENTED_EDGE ( 'NONE', *, *, #536, .F. ) ;
|
||||
#444 = ORIENTED_EDGE ( 'NONE', *, *, #243, .T. ) ;
|
||||
#445 = SURFACE_SIDE_STYLE ('',( #171 ) ) ;
|
||||
#446 = SURFACE_STYLE_USAGE ( .BOTH. , #353 ) ;
|
||||
#447 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
|
||||
#448 = ADVANCED_FACE ( 'NONE', ( #273 ), #373, .T. ) ;
|
||||
#449 = VECTOR ( 'NONE', #322, 39.37007874015748100 ) ;
|
||||
#450 = EDGE_LOOP ( 'NONE', ( #616, #409, #543, #347 ) ) ;
|
||||
#451 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #525 ) ;
|
||||
#452 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#453 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #537, #581 ) ;
|
||||
#454 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#455 = LINE ( 'NONE', #116, #168 ) ;
|
||||
#456 = CYLINDRICAL_SURFACE ( 'NONE', #609, 0.05000000000000001000 ) ;
|
||||
#457 = EDGE_CURVE ( 'NONE', #29, #214, #384, .T. ) ;
|
||||
#458 = LINE ( 'NONE', #91, #464 ) ;
|
||||
#459 = PLANE ( 'NONE', #172 ) ;
|
||||
#460 = VERTEX_POINT ( 'NONE', #533 ) ;
|
||||
#461 = ORIENTED_EDGE ( 'NONE', *, *, #142, .F. ) ;
|
||||
#462 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, -4.460595552154893600E-016, 0.1374999999999987300 ) ) ;
|
||||
#463 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.04999999999999996800, 0.0000000000000000000 ) ) ;
|
||||
#464 = VECTOR ( 'NONE', #245, 39.37007874015748100 ) ;
|
||||
#465 = EDGE_CURVE ( 'NONE', #151, #570, #539, .T. ) ;
|
||||
#466 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ;
|
||||
#467 = VERTEX_POINT ( 'NONE', #475 ) ;
|
||||
#468 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #406 ) ) ;
|
||||
#469 = FACE_OUTER_BOUND ( 'NONE', #108, .T. ) ;
|
||||
#470 = FACE_OUTER_BOUND ( 'NONE', #290, .T. ) ;
|
||||
#471 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#472 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#473 = ORIENTED_EDGE ( 'NONE', *, *, #568, .T. ) ;
|
||||
#474 = ORIENTED_EDGE ( 'NONE', *, *, #69, .T. ) ;
|
||||
#475 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
|
||||
#476 = AXIS2_PLACEMENT_3D ( 'NONE', #83, #635, #330 ) ;
|
||||
#477 = CIRCLE ( 'NONE', #476, 0.05000000000000001000 ) ;
|
||||
#478 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.4242987285365911200, 0.8499999999999999800 ) ) ;
|
||||
#479 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ;
|
||||
#480 = ORIENTED_EDGE ( 'NONE', *, *, #228, .T. ) ;
|
||||
#481 = CARTESIAN_POINT ( 'NONE', ( 0.5767003399721217800, 0.4649999999999998000, 0.1375000000000002300 ) ) ;
|
||||
#482 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #406 ), #417 ) ;
|
||||
#483 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ;
|
||||
#484 = CARTESIAN_POINT ( 'NONE', ( 0.7999999999999999300, 0.4649999999999998000, 0.0000000000000000000 ) ) ;
|
||||
#485 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, -9.797174393178824900E-017, 0.8499999999999999800 ) ) ;
|
||||
#486 = AXIS2_PLACEMENT_3D ( 'NONE', #380, #30, #427 ) ;
|
||||
#487 = CYLINDRICAL_SURFACE ( 'NONE', #403, 0.05000000000000001000 ) ;
|
||||
#488 = CIRCLE ( 'NONE', #432, 0.2734644684100194200 ) ;
|
||||
#489 = ORIENTED_EDGE ( 'NONE', *, *, #228, .F. ) ;
|
||||
#490 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#491 = EDGE_CURVE ( 'NONE', #360, #579, #523, .T. ) ;
|
||||
#492 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#493 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ;
|
||||
#494 = ORIENTED_EDGE ( 'NONE', *, *, #620, .T. ) ;
|
||||
#495 = VERTEX_POINT ( 'NONE', #324 ) ;
|
||||
#496 = CARTESIAN_POINT ( 'NONE', ( 0.6311082432557060300, 0.2649999999999997900, 0.1535966028084420300 ) ) ;
|
||||
#497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#498 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#499 = CYLINDRICAL_SURFACE ( 'NONE', #556, 0.05000000000000001000 ) ;
|
||||
#500 = VECTOR ( 'NONE', #105, 39.37007874015748100 ) ;
|
||||
#501 = LINE ( 'NONE', #40, #378 ) ;
|
||||
#502 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
|
||||
#503 = EDGE_CURVE ( 'NONE', #271, #266, #507, .T. ) ;
|
||||
#504 = CARTESIAN_POINT ( 'NONE', ( -0.2500000000000000600, 0.7299999999999998700, 0.8499999999999999800 ) ) ;
|
||||
#505 = VERTEX_POINT ( 'NONE', #582 ) ;
|
||||
#506 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#507 = LINE ( 'NONE', #328, #57 ) ;
|
||||
#508 = VECTOR ( 'NONE', #159, 39.37007874015748100 ) ;
|
||||
#509 = CIRCLE ( 'NONE', #333, 0.1000000000000000200 ) ;
|
||||
#510 = VERTEX_POINT ( 'NONE', #130 ) ;
|
||||
#511 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#512 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ;
|
||||
#513 = ORIENTED_EDGE ( 'NONE', *, *, #170, .T. ) ;
|
||||
#514 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.7299999999999998700, 0.4000000000000000200 ) ) ;
|
||||
#515 = LINE ( 'NONE', #188, #118 ) ;
|
||||
#516 = LINE ( 'NONE', #361, #256 ) ;
|
||||
#517 = AXIS2_PLACEMENT_3D ( 'NONE', #547, #96, #648 ) ;
|
||||
#518 = CIRCLE ( 'NONE', #356, 0.1000000000000000200 ) ;
|
||||
#519 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #447, #9, #348, #504 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 4.712388980384689700, 6.283185307179586200 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#520 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.4000000000000000200 ) ) ;
|
||||
#521 = EDGE_CURVE ( 'NONE', #252, #624, #477, .T. ) ;
|
||||
#522 = CLOSED_SHELL ( 'NONE', ( #53, #393, #211, #55, #145, #101, #603, #402, #150, #206, #157, #303, #349, #448, #343, #590, #249, #104, #438, #594 ) ) ;
|
||||
#523 = CIRCLE ( 'NONE', #486, 0.1000000000000000200 ) ;
|
||||
#524 = FACE_BOUND ( 'NONE', #76, .T. ) ;
|
||||
#525 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #149, #84 ) ;
|
||||
#526 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ;
|
||||
#527 = ORIENTED_EDGE ( 'NONE', *, *, #42, .T. ) ;
|
||||
#528 = CARTESIAN_POINT ( 'NONE', ( 0.5767003399721217800, -1.084823351980953500E-015, 0.2374999999999987700 ) ) ;
|
||||
#529 = EDGE_CURVE ( 'NONE', #495, #8, #531, .T. ) ;
|
||||
#530 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.2649999999999997900, 0.1374999999999995700 ) ) ;
|
||||
#531 = CIRCLE ( 'NONE', #538, 0.05000000000000001000 ) ;
|
||||
#532 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #502 );
|
||||
#533 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.04999999999999992000, 0.8499999999999999800 ) ) ;
|
||||
#534 = PLANE ( 'NONE', #453 ) ;
|
||||
#535 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ;
|
||||
#536 = EDGE_CURVE ( 'NONE', #285, #350, #90, .T. ) ;
|
||||
#537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -3.073328992872299300E-015, 1.000000000000000000 ) ) ;
|
||||
#538 = AXIS2_PLACEMENT_3D ( 'NONE', #541, #246, #549 ) ;
|
||||
#539 = CIRCLE ( 'NONE', #155, 0.05000000000000001000 ) ;
|
||||
#540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#541 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.6799999999999998300, -0.1000000000000000100 ) ) ;
|
||||
#542 = FACE_OUTER_BOUND ( 'NONE', #595, .T. ) ;
|
||||
#543 = ORIENTED_EDGE ( 'NONE', *, *, #280, .T. ) ;
|
||||
#544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#545 = AXIS2_PLACEMENT_3D ( 'NONE', #593, #596, #5 ) ;
|
||||
#546 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ;
|
||||
#547 = CARTESIAN_POINT ( 'NONE', ( 0.5767003399721217800, 0.2649999999999997900, 0.2374999999999987700 ) ) ;
|
||||
#548 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ;
|
||||
#549 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#551 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.04999999999999995400, 0.8499999999999999800 ) ) ;
|
||||
#552 = FACE_OUTER_BOUND ( 'NONE', #577, .T. ) ;
|
||||
#553 = PRESENTATION_STYLE_ASSIGNMENT (( #295 ) ) ;
|
||||
#554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#555 = CARTESIAN_POINT ( 'NONE', ( 0.6311082432557060300, -6.829619984160658000E-017, 0.1535966028084420300 ) ) ;
|
||||
#556 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #646, #292 ) ;
|
||||
#557 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
|
||||
#558 = EDGE_CURVE ( 'NONE', #113, #252, #404, .T. ) ;
|
||||
#559 = LINE ( 'NONE', #431, #320 ) ;
|
||||
#560 = FACE_OUTER_BOUND ( 'NONE', #131, .T. ) ;
|
||||
#561 = CARTESIAN_POINT ( 'NONE', ( 0.7798945267431974800, -6.829619984160658000E-017, -0.07584937629939572700 ) ) ;
|
||||
#562 = LINE ( 'NONE', #355, #354 ) ;
|
||||
#563 = EDGE_CURVE ( 'NONE', #151, #233, #559, .T. ) ;
|
||||
#564 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.6799999999999998300, 0.0000000000000000000 ) ) ;
|
||||
#565 = COLOUR_RGB ( '',0.2941176470588235400, 0.2941176470588235400, 0.2941176470588235400 ) ;
|
||||
#566 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#567 = EDGE_CURVE ( 'NONE', #214, #111, #305, .T. ) ;
|
||||
#568 = EDGE_CURVE ( 'NONE', #26, #266, #515, .T. ) ;
|
||||
#569 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #297, #47 ) ;
|
||||
#570 = VERTEX_POINT ( 'NONE', #148 ) ;
|
||||
#571 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#572 = EDGE_CURVE ( 'NONE', #415, #510, #13, .T. ) ;
|
||||
#573 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ;
|
||||
#574 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#575 = FACE_OUTER_BOUND ( 'NONE', #1, .T. ) ;
|
||||
#576 = CARTESIAN_POINT ( 'NONE', ( 0.7257473812947276000, 0.2649999999999997900, 0.1922008095288493800 ) ) ;
|
||||
#577 = EDGE_LOOP ( 'NONE', ( #461, #474, #480, #483, #626, #326 ) ) ;
|
||||
#578 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.7299999999999998700, 0.4000000000000000200 ) ) ;
|
||||
#579 = VERTEX_POINT ( 'NONE', #254 ) ;
|
||||
#580 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.8399999999999999700 ) ) ;
|
||||
#581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -3.073328992872299300E-015 ) ) ;
|
||||
#582 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, -9.797174393178824900E-017, -0.1000000000000000100 ) ) ;
|
||||
#583 = VECTOR ( 'NONE', #93, 39.37007874015748100 ) ;
|
||||
#584 = EDGE_CURVE ( 'NONE', #29, #99, #4, .T. ) ;
|
||||
#585 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ;
|
||||
#586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#587 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#588 = VERTEX_POINT ( 'NONE', #143 ) ;
|
||||
#589 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#590 = ADVANCED_FACE ( 'NONE', ( #642 ), #368, .T. ) ;
|
||||
#591 = CARTESIAN_POINT ( 'NONE', ( -0.2000000000000000100, 0.6799999999999998300, 0.8399999999999999700 ) ) ;
|
||||
#592 = VECTOR ( 'NONE', #269, 39.37007874015748100 ) ;
|
||||
#593 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, 0.04999999999999993300, 0.8499999999999999800 ) ) ;
|
||||
#594 = ADVANCED_FACE ( 'NONE', ( #244 ), #499, .T. ) ;
|
||||
#595 = EDGE_LOOP ( 'NONE', ( #527, #18, #407, #230 ) ) ;
|
||||
#596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#597 = ORIENTED_EDGE ( 'NONE', *, *, #521, .T. ) ;
|
||||
#598 = ORIENTED_EDGE ( 'NONE', *, *, #268, .T. ) ;
|
||||
#599 =( CONVERSION_BASED_UNIT ( 'INCH', #422 ) LENGTH_UNIT ( ) NAMED_UNIT ( #408 ) );
|
||||
#600 = LINE ( 'NONE', #514, #377 ) ;
|
||||
#601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#602 = ORIENTED_EDGE ( 'NONE', *, *, #272, .T. ) ;
|
||||
#603 = ADVANCED_FACE ( 'NONE', ( #112 ), #248, .T. ) ;
|
||||
#604 = EDGE_LOOP ( 'NONE', ( #411, #637, #15, #241 ) ) ;
|
||||
#605 = PLANE ( 'NONE', #80 ) ;
|
||||
#606 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #589, #50 ) ;
|
||||
#607 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#608 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ;
|
||||
#609 = AXIS2_PLACEMENT_3D ( 'NONE', #397, #298, #153 ) ;
|
||||
#610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#611 = VECTOR ( 'NONE', #619, 39.37007874015748100 ) ;
|
||||
#612 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
|
||||
#613 = EDGE_LOOP ( 'NONE', ( #334, #444, #270, #598, #585, #434 ) ) ;
|
||||
#614 = PLANE ( 'NONE', #342 ) ;
|
||||
#615 = ORIENTED_EDGE ( 'NONE', *, *, #645, .T. ) ;
|
||||
#616 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ;
|
||||
#617 = CYLINDRICAL_SURFACE ( 'NONE', #66, 0.1000000000000000200 ) ;
|
||||
#618 = LINE ( 'NONE', #301, #265 ) ;
|
||||
#619 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#620 = EDGE_CURVE ( 'NONE', #505, #588, #622, .T. ) ;
|
||||
#621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#622 = CIRCLE ( 'NONE', #569, 0.05000000000000001000 ) ;
|
||||
#623 = VECTOR ( 'NONE', #217, 39.37007874015748100 ) ;
|
||||
#624 = VERTEX_POINT ( 'NONE', #551 ) ;
|
||||
#625 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#626 = ORIENTED_EDGE ( 'NONE', *, *, #280, .F. ) ;
|
||||
#627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 3.244069492476316800E-015 ) ) ;
|
||||
#628 = EDGE_LOOP ( 'NONE', ( #309, #597, #185, #379, #602, #535 ) ) ;
|
||||
#629 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#630 = VECTOR ( 'NONE', #389, 39.37007874015748100 ) ;
|
||||
#631 = VECTOR ( 'NONE', #610, 39.37007874015748100 ) ;
|
||||
#632 = EDGE_CURVE ( 'NONE', #8, #308, #429, .T. ) ;
|
||||
#633 = LINE ( 'NONE', #186, #257 ) ;
|
||||
#634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
|
||||
#635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#636 = CARTESIAN_POINT ( 'NONE', ( -0.5500000000000000400, -6.735557395310441300E-017, 0.4000000000000000200 ) ) ;
|
||||
#637 = ORIENTED_EDGE ( 'NONE', *, *, #503, .T. ) ;
|
||||
#638 = EDGE_CURVE ( 'NONE', #26, #114, #103, .T. ) ;
|
||||
#639 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #625, #621 ) ;
|
||||
#640 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -0.1000000000000000100 ) ) ;
|
||||
#641 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.4242987285365911200, 0.8499999999999999800 ) ) ;
|
||||
#642 = FACE_OUTER_BOUND ( 'NONE', #604, .T. ) ;
|
||||
#643 = CIRCLE ( 'NONE', #391, 0.2734644684100194200 ) ;
|
||||
#644 = CARTESIAN_POINT ( 'NONE', ( 0.7257473812947276000, -6.829619984160658000E-017, 0.1922008095288494100 ) ) ;
|
||||
#645 = EDGE_CURVE ( 'NONE', #570, #252, #237, .T. ) ;
|
||||
#646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
#647 = CARTESIAN_POINT ( 'NONE', ( -0.5999999999999999800, 0.7299999999999998700, -0.1000000000000000100 ) ) ;
|
||||
#648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
1924
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/trigger.step
Normal file
1924
Firearms/Revenant_Pistol_v1.1-Proteus/STEP/trigger.step
Normal file
File diff suppressed because it is too large
Load Diff
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/frame_l.stl
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/frame_l.stl
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/frame_r.stl
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/frame_r.stl
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/pin.stl
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/pin.stl
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/striker.stl
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/striker.stl
Normal file
Binary file not shown.
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/trigger.stl
Normal file
BIN
Firearms/Revenant_Pistol_v1.1-Proteus/STL/trigger.stl
Normal file
Binary file not shown.
Loading…
Reference in New Issue
Block a user