Adding spindle-back_half and spindle-front_half by HaveBlue to Rifles/AR-15_FOSSCAD_Israel_75rd_Drum_Magazine-nils/ by nils. The spindle was split, with the inside hollowed, and registration holes have been added all around. Use a short piece of 3mm or 1.75mm filament in the holes to align the halves. All respect formats have been added.

Rifles/AR-15_FOSSCAD_Israel_75rd_Drum_Magazine-nils/README.md

@@ -13,8 +13,7 @@ GPL v3.0
 A 75 round drum based off of the classic AKM/RPK drum, adapted to hold the 5.56mm cartridge. This CAD contains parts inspired by the Defense Distributed Cuomo Magazine.
 
 #### Construction
-**WARNING** This is an alpha-quality release. A working drum will require significant manual adjustment. All parts should be printed at 100% infill. 
+**WARNING** This is an alpha-quality release. A working drum will require significant manual adjustment. All parts should be printed at 100% infill.
-
 
 #### Assembly
 
@@ -38,7 +37,6 @@ A 75 round drum based off of the classic AKM/RPK drum, adapted to hold the 5.56m
 5. Replace the rear cover, taking care to properly align the winder with the top of the key
 6. Turn the winder counter-clockwise until sufficient tension has been achieved
 
-
 #### TODO
 * Adapt drum to accept readily-available torque springs
 * Adjust for tolerances/reliability