Upgrading the Nephilim AR-10 lower receiver to version 2.0 by Warfairy. This version has a phobos style reinforced buffer tower.

Rifles/AR-10_Nephilim_Reinforced_Lower_Receiver_v1.1-WarFairy/README.md

@@ -1,13 +0,0 @@
-# WarFairy Arms Nephilim AR-10
-
-#### Version
-1.1
-
-#### Description
-The Nephilim AR-10 lower receiver by Shanrilivan.  This lower receiver uses the DPMS pattern.
-
-#### NOTE
-THIS IS AN AR-10. THIS WILL NOT WORK WITH STANDARD AR-15 UPPER RECEIVERS OR LOWER PARTS KITS. DO YOUR RESEARCH BEFORE BUILDING.
-
-#### Disclaimer
-THIS IS UNTESTED. USE CAUTION WHEN TEST FIRING.

Rifles/AR-10_Nephilim_Reinforced_Lower_Receiver_v2.0-WarFairy/README.md

@@ -0,0 +1,21 @@
+# Nephilim AR-10 Receiver 
+
+#### Author
+Warfairy
+
+#### Version 
+2.0
+
+#### Description
+
+This is a 3D printed receiver for the AR-10 platform. It is recommended you print from bottom to top for greatest strength in the buffer tower and takedown pin areas. This lower receiver uses the DPMS pattern.
+
+Credit to LTS From Grabcad.com for their AR-10 receiver forming from which this design was inpsired from and JT and Shadowfall for the basis of the Buffer Tower reinforcement.
+
+#### NOTE
+THIS IS AN AR-10. THIS WILL NOT WORK WITH STANDARD AR-15 UPPER RECEIVERS OR LOWER PARTS KITS. DO YOUR RESEARCH BEFORE BUILDING. Please direct all inquiries, criticism, and hate mail to WarFairy at www.fosscad.org/fc/chat
+
+#### Disclaimer
+THIS IS UNTESTED. USE CAUTION WHEN TESTFIRING. 
+
+