Adding Aleppo Rifle Grenade by Anonymous.

Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/README.md

@@ -0,0 +1,19 @@
+# Aleppo Rifle Grenade
+
+#### Author
+Anonymous
+
+#### Version
+0.1
+
+#### Description
+Three part printable modular rifle grenade.  Designed to fit any standard 22mm grenade launching spigot.  As far as I can tell, both NATO and Warsaw pact spigots are 22mm so this should work with both.  
+
+The spigot recess diameter may need to be tweaked for individual printers to ensure a tight but sliding fit on the spigot.  Payload space in base is considered "user space" and is to be filled by the end user (you can put some treats in there and launch them across a body of water to your friend stuck on a deserted island, for example--but then you probably want to leave out the impact fuse).  Also included is an impact fuse that incorporates a nipple from a Peretti 1848 cap and ball pistol.  Any suitable nipple may be substituted.  Depending on the hardness of the impact zone, the striker may need to have mass added to it.  It can also be easily made entirely out of metal to moot this point. 
+
+The striker of the impact fuse is intended to be fitted with a thin, paper rupture disk at the base, filled with black powder, and then topped with the screw-in nipple.  The nipple should self thread in the plastic.  The nipple would then be capped with the appropriate sized cap, dropped into the nose tube, and the cover (which incorporates the hammer) snapped into place.  THIS SHOULD NOT BE DONE UNTIL IMMEDIATELY BEFORE FIRING AS THIS ARMS THE DEVICE.  Version 0.2 will include a cross pin safety that locks the impact fuse into place until removed.
+
+#### Disclaimer
+THIS IS COMPLETELY UNTESTED AND MAY VERY WELL BLOW UP IN YOUR FACE IF YOU DON'T KNOW WHAT YOU ARE DOING.  Use this set of models as a guide only.  Don't do anything stupid.  
+
+Also be aware of the laws in your jurisdiction with respect to explosives and packing them into things that fly.  Again, don't be stupid.

Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/fuse.step

@@ -0,0 +1,907 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('fuse.step',
+    '2014-03-25T03:38:13',
+    ( 'eric' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2012',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = VECTOR ( 'NONE', #443, 1000.000000000000000 ) ;
+#2 = CYLINDRICAL_SURFACE ( 'NONE', #13, 33.00000000000000000 ) ;
+#3 = VECTOR ( 'NONE', #440, 1000.000000000000000 ) ;
+#4 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #447, #448 ) ;
+#5 = FACE_OUTER_BOUND ( 'NONE', #68, .T. ) ;
+#6 = VECTOR ( 'NONE', #437, 1000.000000000000000 ) ;
+#7 = AXIS2_PLACEMENT_3D ( 'NONE', #348, #349, #350 ) ;
+#8 = FACE_OUTER_BOUND ( 'NONE', #90, .T. ) ;
+#9 = VECTOR ( 'NONE', #434, 1000.000000000000000 ) ;
+#10 = CLOSED_SHELL ( 'NONE', ( #592, #603, #604, #591, #639, #637, #638, #607, #713, #605, #692, #693, #694, #589, #714, #602, #690, #691, #680, #681, #595, #590, #707, #708, #684, #683, #679, #678 ) ) ;
+#11 = VECTOR ( 'NONE', #431, 1000.000000000000000 ) ;
+#12 = FACE_OUTER_BOUND ( 'NONE', #65, .T. ) ;
+#13 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #336, #337 ) ;
+#14 = VECTOR ( 'NONE', #347, 1000.000000000000000 ) ;
+#15 = VECTOR ( 'NONE', #428, 1000.000000000000000 ) ;
+#16 = AXIS2_PLACEMENT_3D ( 'NONE', #332, #333, #334 ) ;
+#17 = VECTOR ( 'NONE', #425, 1000.000000000000000 ) ;
+#18 = VECTOR ( 'NONE', #419, 1000.000000000000000 ) ;
+#19 = AXIS2_PLACEMENT_3D ( 'NONE', #516, #517, #518 ) ;
+#20 = VECTOR ( 'NONE', #357, 1000.000000000000000 ) ;
+#21 = VECTOR ( 'NONE', #416, 1000.000000000000000 ) ;
+#22 = AXIS2_PLACEMENT_3D ( 'NONE', #413, #420, #421 ) ;
+#23 = VECTOR ( 'NONE', #410, 1000.000000000000000 ) ;
+#24 = AXIS2_PLACEMENT_3D ( 'NONE', #404, #411, #412 ) ;
+#25 = VECTOR ( 'NONE', #407, 1000.000000000000000 ) ;
+#26 = FACE_OUTER_BOUND ( 'NONE', #66, .T. ) ;
+#27 = AXIS2_PLACEMENT_3D ( 'NONE', #398, #399, #400 ) ;
+#28 = AXIS2_PLACEMENT_3D ( 'NONE', #401, #402, #403 ) ;
+#29 = FACE_BOUND ( 'NONE', #70, .T. ) ;
+#30 = AXIS2_PLACEMENT_3D ( 'NONE', #354, #358, #359 ) ;
+#31 = CYLINDRICAL_SURFACE ( 'NONE', #32, 5.500000000000000000 ) ;
+#32 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #395, #396 ) ;
+#33 = FACE_OUTER_BOUND ( 'NONE', #69, .T. ) ;
+#34 = CYLINDRICAL_SURFACE ( 'NONE', #40, 5.500000000000000000 ) ;
+#35 = FACE_OUTER_BOUND ( 'NONE', #72, .T. ) ;
+#36 = CYLINDRICAL_SURFACE ( 'NONE', #43, 2.499999999999998700 ) ;
+#37 = VECTOR ( 'NONE', #387, 1000.000000000000000 ) ;
+#38 = VECTOR ( 'NONE', #343, 1000.000000000000000 ) ;
+#39 = FACE_OUTER_BOUND ( 'NONE', #89, .T. ) ;
+#40 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #392, #393 ) ;
+#41 = AXIS2_PLACEMENT_3D ( 'NONE', #328, #329, #330 ) ;
+#42 = CYLINDRICAL_SURFACE ( 'NONE', #61, 5.500000000000000000 ) ;
+#43 = AXIS2_PLACEMENT_3D ( 'NONE', #338, #339, #340 ) ;
+#44 = FACE_OUTER_BOUND ( 'NONE', #71, .T. ) ;
+#45 = FACE_OUTER_BOUND ( 'NONE', #81, .T. ) ;
+#46 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #377, #378 ) ;
+#47 = AXIS2_PLACEMENT_3D ( 'NONE', #379, #380, #381 ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #389, #390 ) ;
+#49 = FACE_BOUND ( 'NONE', #76, .T. ) ;
+#50 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #373, #374 ) ;
+#51 = FACE_OUTER_BOUND ( 'NONE', #75, .T. ) ;
+#52 = CYLINDRICAL_SURFACE ( 'NONE', #41, 7.500000000000000000 ) ;
+#53 = FACE_OUTER_BOUND ( 'NONE', #73, .T. ) ;
+#54 = CYLINDRICAL_SURFACE ( 'NONE', #55, 7.500000000000000000 ) ;
+#55 = AXIS2_PLACEMENT_3D ( 'NONE', #369, #370, #371 ) ;
+#56 = FACE_OUTER_BOUND ( 'NONE', #67, .T. ) ;
+#57 = FACE_OUTER_BOUND ( 'NONE', #84, .T. ) ;
+#58 = AXIS2_PLACEMENT_3D ( 'NONE', #351, #352, #353 ) ;
+#59 = AXIS2_PLACEMENT_3D ( 'NONE', #360, #367, #368 ) ;
+#60 = VECTOR ( 'NONE', #366, 1000.000000000000000 ) ;
+#61 = AXIS2_PLACEMENT_3D ( 'NONE', #382, #383, #384 ) ;
+#62 = VECTOR ( 'NONE', #363, 1000.000000000000000 ) ;
+#63 = CYLINDRICAL_SURFACE ( 'NONE', #59, 2.499999999999998700 ) ;
+#64 = ORIENTED_EDGE ( 'NONE', *, *, #599, .F. ) ;
+#65 = EDGE_LOOP ( 'NONE', ( #64, #116, #118, #114 ) ) ;
+#66 = EDGE_LOOP ( 'NONE', ( #115, #120, #121, #119 ) ) ;
+#67 = EDGE_LOOP ( 'NONE', ( #117, #276, #278, #275 ) ) ;
+#68 = EDGE_LOOP ( 'NONE', ( #279, #280, #281, #277 ) ) ;
+#69 = EDGE_LOOP ( 'NONE', ( #126, #124 ) ) ;
+#70 = EDGE_LOOP ( 'NONE', ( #125, #122, #123, #107, #108, #106, #105, #109, #100, #97, #98, #99, #113, #112, #111, #110 ) ) ;
+#71 = EDGE_LOOP ( 'NONE', ( #228, #226, #227, #104 ) ) ;
+#72 = EDGE_LOOP ( 'NONE', ( #103, #101, #102, #127 ) ) ;
+#73 = EDGE_LOOP ( 'NONE', ( #128, #130, #129, #131 ) ) ;
+#74 = EDGE_LOOP ( 'NONE', ( #132, #134, #133, #135 ) ) ;
+#75 = EDGE_LOOP ( 'NONE', ( #137, #138 ) ) ;
+#76 = EDGE_LOOP ( 'NONE', ( #139, #141 ) ) ;
+#77 = EDGE_LOOP ( 'NONE', ( #136, #142, #140, #144 ) ) ;
+#78 = EDGE_LOOP ( 'NONE', ( #145, #146, #143, #148 ) ) ;
+#79 = EDGE_LOOP ( 'NONE', ( #149, #151 ) ) ;
+#80 = EDGE_LOOP ( 'NONE', ( #147, #152 ) ) ;
+#81 = EDGE_LOOP ( 'NONE', ( #153, #154, #155, #150 ) ) ;
+#82 = EDGE_LOOP ( 'NONE', ( #157, #158, #156, #159, #160, #161, #163, #162, #164, #165, #167, #166, #168, #169, #171, #170 ) ) ;
+#83 = EDGE_LOOP ( 'NONE', ( #173, #175 ) ) ;
+#84 = EDGE_LOOP ( 'NONE', ( #172, #176, #177, #174 ) ) ;
+#85 = EDGE_LOOP ( 'NONE', ( #179, #180, #178, #182 ) ) ;
+#86 = EDGE_LOOP ( 'NONE', ( #183, #184, #181, #186 ) ) ;
+#87 = EDGE_LOOP ( 'NONE', ( #187, #188, #189, #185 ) ) ;
+#88 = EDGE_LOOP ( 'NONE', ( #191, #192, #190, #194 ) ) ;
+#89 = EDGE_LOOP ( 'NONE', ( #195, #196, #193, #198 ) ) ;
+#90 = EDGE_LOOP ( 'NONE', ( #199, #200, #201, #197 ) ) ;
+#91 = EDGE_LOOP ( 'NONE', ( #203, #204, #202, #206 ) ) ;
+#92 = EDGE_LOOP ( 'NONE', ( #207, #208, #205, #210 ) ) ;
+#93 = EDGE_LOOP ( 'NONE', ( #211, #212, #213, #209 ) ) ;
+#94 = EDGE_LOOP ( 'NONE', ( #215, #216, #214, #218 ) ) ;
+#95 = EDGE_LOOP ( 'NONE', ( #219, #220, #217, #222 ) ) ;
+#96 = EDGE_LOOP ( 'NONE', ( #223, #224, #225, #221 ) ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #601, .F. ) ;
+#98 = ORIENTED_EDGE ( 'NONE', *, *, #597, .T. ) ;
+#99 = ORIENTED_EDGE ( 'NONE', *, *, #702, .F. ) ;
+#100 = ORIENTED_EDGE ( 'NONE', *, *, #608, .F. ) ;
+#101 = ORIENTED_EDGE ( 'NONE', *, *, #598, .T. ) ;
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #705, .F. ) ;
+#103 = ORIENTED_EDGE ( 'NONE', *, *, #606, .T. ) ;
+#104 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ;
+#105 = ORIENTED_EDGE ( 'NONE', *, *, #609, .T. ) ;
+#106 = ORIENTED_EDGE ( 'NONE', *, *, #709, .F. ) ;
+#107 = ORIENTED_EDGE ( 'NONE', *, *, #712, .F. ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #710, .F. ) ;
+#109 = ORIENTED_EDGE ( 'NONE', *, *, #600, .F. ) ;
+#110 = ORIENTED_EDGE ( 'NONE', *, *, #644, .F. ) ;
+#111 = ORIENTED_EDGE ( 'NONE', *, *, #705, .T. ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #704, .F. ) ;
+#113 = ORIENTED_EDGE ( 'NONE', *, *, #703, .F. ) ;
+#114 = ORIENTED_EDGE ( 'NONE', *, *, #700, .F. ) ;
+#115 = ORIENTED_EDGE ( 'NONE', *, *, #695, .F. ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #594, .T. ) ;
+#117 = ORIENTED_EDGE ( 'NONE', *, *, #643, .T. ) ;
+#118 = ORIENTED_EDGE ( 'NONE', *, *, #698, .T. ) ;
+#119 = ORIENTED_EDGE ( 'NONE', *, *, #699, .F. ) ;
+#120 = ORIENTED_EDGE ( 'NONE', *, *, #696, .T. ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #697, .T. ) ;
+#122 = ORIENTED_EDGE ( 'NONE', *, *, #687, .F. ) ;
+#123 = ORIENTED_EDGE ( 'NONE', *, *, #711, .T. ) ;
+#124 = ORIENTED_EDGE ( 'NONE', *, *, #697, .F. ) ;
+#125 = ORIENTED_EDGE ( 'NONE', *, *, #689, .F. ) ;
+#126 = ORIENTED_EDGE ( 'NONE', *, *, #686, .F. ) ;
+#127 = ORIENTED_EDGE ( 'NONE', *, *, #682, .T. ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #677, .T. ) ;
+#129 = ORIENTED_EDGE ( 'NONE', *, *, #597, .F. ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #706, .T. ) ;
+#131 = ORIENTED_EDGE ( 'NONE', *, *, #676, .T. ) ;
+#132 = ORIENTED_EDGE ( 'NONE', *, *, #674, .T. ) ;
+#133 = ORIENTED_EDGE ( 'NONE', *, *, #609, .F. ) ;
+#134 = ORIENTED_EDGE ( 'NONE', *, *, #675, .T. ) ;
+#135 = ORIENTED_EDGE ( 'NONE', *, *, #673, .T. ) ;
+#136 = ORIENTED_EDGE ( 'NONE', *, *, #641, .F. ) ;
+#137 = ORIENTED_EDGE ( 'NONE', *, *, #688, .T. ) ;
+#138 = ORIENTED_EDGE ( 'NONE', *, *, #672, .T. ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #671, .F. ) ;
+#140 = ORIENTED_EDGE ( 'NONE', *, *, #685, .T. ) ;
+#141 = ORIENTED_EDGE ( 'NONE', *, *, #698, .F. ) ;
+#142 = ORIENTED_EDGE ( 'NONE', *, *, #670, .T. ) ;
+#143 = ORIENTED_EDGE ( 'NONE', *, *, #642, .T. ) ;
+#144 = ORIENTED_EDGE ( 'NONE', *, *, #672, .F. ) ;
+#145 = ORIENTED_EDGE ( 'NONE', *, *, #701, .F. ) ;
+#146 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ;
+#147 = ORIENTED_EDGE ( 'NONE', *, *, #643, .F. ) ;
+#148 = ORIENTED_EDGE ( 'NONE', *, *, #670, .F. ) ;
+#149 = ORIENTED_EDGE ( 'NONE', *, *, #668, .T. ) ;
+#150 = ORIENTED_EDGE ( 'NONE', *, *, #686, .T. ) ;
+#151 = ORIENTED_EDGE ( 'NONE', *, *, #695, .T. ) ;
+#152 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ;
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #696, .F. ) ;
+#154 = ORIENTED_EDGE ( 'NONE', *, *, #668, .F. ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #699, .T. ) ;
+#156 = ORIENTED_EDGE ( 'NONE', *, *, #666, .T. ) ;
+#157 = ORIENTED_EDGE ( 'NONE', *, *, #674, .F. ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #667, .T. ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #665, .T. ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #646, .F. ) ;
+#161 = ORIENTED_EDGE ( 'NONE', *, *, #664, .T. ) ;
+#162 = ORIENTED_EDGE ( 'NONE', *, *, #662, .T. ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #663, .T. ) ;
+#164 = ORIENTED_EDGE ( 'NONE', *, *, #606, .F. ) ;
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #661, .T. ) ;
+#166 = ORIENTED_EDGE ( 'NONE', *, *, #659, .T. ) ;
+#167 = ORIENTED_EDGE ( 'NONE', *, *, #660, .T. ) ;
+#168 = ORIENTED_EDGE ( 'NONE', *, *, #677, .F. ) ;
+#169 = ORIENTED_EDGE ( 'NONE', *, *, #658, .T. ) ;
+#170 = ORIENTED_EDGE ( 'NONE', *, *, #656, .T. ) ;
+#171 = ORIENTED_EDGE ( 'NONE', *, *, #657, .T. ) ;
+#172 = ORIENTED_EDGE ( 'NONE', *, *, #594, .F. ) ;
+#173 = ORIENTED_EDGE ( 'NONE', *, *, #655, .T. ) ;
+#174 = ORIENTED_EDGE ( 'NONE', *, *, #671, .T. ) ;
+#175 = ORIENTED_EDGE ( 'NONE', *, *, #599, .T. ) ;
+#176 = ORIENTED_EDGE ( 'NONE', *, *, #655, .F. ) ;
+#177 = ORIENTED_EDGE ( 'NONE', *, *, #700, .T. ) ;
+#178 = ORIENTED_EDGE ( 'NONE', *, *, #667, .F. ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ;
+#180 = ORIENTED_EDGE ( 'NONE', *, *, #654, .T. ) ;
+#181 = ORIENTED_EDGE ( 'NONE', *, *, #712, .T. ) ;
+#182 = ORIENTED_EDGE ( 'NONE', *, *, #673, .F. ) ;
+#183 = ORIENTED_EDGE ( 'NONE', *, *, #665, .F. ) ;
+#184 = ORIENTED_EDGE ( 'NONE', *, *, #653, .F. ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #654, .F. ) ;
+#186 = ORIENTED_EDGE ( 'NONE', *, *, #645, .F. ) ;
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #710, .T. ) ;
+#188 = ORIENTED_EDGE ( 'NONE', *, *, #653, .T. ) ;
+#189 = ORIENTED_EDGE ( 'NONE', *, *, #666, .F. ) ;
+#190 = ORIENTED_EDGE ( 'NONE', *, *, #644, .T. ) ;
+#191 = ORIENTED_EDGE ( 'NONE', *, *, #662, .F. ) ;
+#192 = ORIENTED_EDGE ( 'NONE', *, *, #652, .F. ) ;
+#193 = ORIENTED_EDGE ( 'NONE', *, *, #664, .F. ) ;
+#194 = ORIENTED_EDGE ( 'NONE', *, *, #598, .F. ) ;
+#195 = ORIENTED_EDGE ( 'NONE', *, *, #687, .T. ) ;
+#196 = ORIENTED_EDGE ( 'NONE', *, *, #651, .T. ) ;
+#197 = ORIENTED_EDGE ( 'NONE', *, *, #651, .F. ) ;
+#198 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ;
+#199 = ORIENTED_EDGE ( 'NONE', *, *, #689, .T. ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #652, .T. ) ;
+#201 = ORIENTED_EDGE ( 'NONE', *, *, #663, .F. ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #702, .T. ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #659, .F. ) ;
+#204 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #661, .F. ) ;
+#206 = ORIENTED_EDGE ( 'NONE', *, *, #706, .F. ) ;
+#207 = ORIENTED_EDGE ( 'NONE', *, *, #704, .T. ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #649, .T. ) ;
+#209 = ORIENTED_EDGE ( 'NONE', *, *, #649, .F. ) ;
+#210 = ORIENTED_EDGE ( 'NONE', *, *, #682, .F. ) ;
+#211 = ORIENTED_EDGE ( 'NONE', *, *, #703, .T. ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ;
+#213 = ORIENTED_EDGE ( 'NONE', *, *, #660, .F. ) ;
+#214 = ORIENTED_EDGE ( 'NONE', *, *, #658, .F. ) ;
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #601, .T. ) ;
+#216 = ORIENTED_EDGE ( 'NONE', *, *, #648, .T. ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #657, .F. ) ;
+#218 = ORIENTED_EDGE ( 'NONE', *, *, #676, .F. ) ;
+#219 = ORIENTED_EDGE ( 'NONE', *, *, #608, .T. ) ;
+#220 = ORIENTED_EDGE ( 'NONE', *, *, #647, .T. ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #675, .F. ) ;
+#222 = ORIENTED_EDGE ( 'NONE', *, *, #648, .F. ) ;
+#223 = ORIENTED_EDGE ( 'NONE', *, *, #656, .F. ) ;
+#224 = ORIENTED_EDGE ( 'NONE', *, *, #647, .F. ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #600, .T. ) ;
+#226 = ORIENTED_EDGE ( 'NONE', *, *, #645, .T. ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #711, .F. ) ;
+#228 = ORIENTED_EDGE ( 'NONE', *, *, #646, .T. ) ;
+#229 = VERTEX_POINT ( 'NONE', #282 ) ;
+#230 = VERTEX_POINT ( 'NONE', #283 ) ;
+#231 = VERTEX_POINT ( 'NONE', #284 ) ;
+#232 = VERTEX_POINT ( 'NONE', #285 ) ;
+#233 = VERTEX_POINT ( 'NONE', #286 ) ;
+#234 = VERTEX_POINT ( 'NONE', #287 ) ;
+#235 = VERTEX_POINT ( 'NONE', #288 ) ;
+#236 = VERTEX_POINT ( 'NONE', #289 ) ;
+#237 = VERTEX_POINT ( 'NONE', #290 ) ;
+#238 = VERTEX_POINT ( 'NONE', #291 ) ;
+#239 = VERTEX_POINT ( 'NONE', #292 ) ;
+#240 = VERTEX_POINT ( 'NONE', #293 ) ;
+#241 = VERTEX_POINT ( 'NONE', #294 ) ;
+#242 = VERTEX_POINT ( 'NONE', #295 ) ;
+#243 = VERTEX_POINT ( 'NONE', #296 ) ;
+#244 = VERTEX_POINT ( 'NONE', #297 ) ;
+#245 = VERTEX_POINT ( 'NONE', #298 ) ;
+#246 = VERTEX_POINT ( 'NONE', #299 ) ;
+#247 = VERTEX_POINT ( 'NONE', #300 ) ;
+#248 = VERTEX_POINT ( 'NONE', #301 ) ;
+#249 = VERTEX_POINT ( 'NONE', #302 ) ;
+#250 = VERTEX_POINT ( 'NONE', #303 ) ;
+#251 = VERTEX_POINT ( 'NONE', #304 ) ;
+#252 = VERTEX_POINT ( 'NONE', #305 ) ;
+#253 = VERTEX_POINT ( 'NONE', #306 ) ;
+#254 = VERTEX_POINT ( 'NONE', #307 ) ;
+#255 = VERTEX_POINT ( 'NONE', #308 ) ;
+#256 = VERTEX_POINT ( 'NONE', #309 ) ;
+#257 = VERTEX_POINT ( 'NONE', #310 ) ;
+#258 = VERTEX_POINT ( 'NONE', #311 ) ;
+#259 = VERTEX_POINT ( 'NONE', #312 ) ;
+#260 = VERTEX_POINT ( 'NONE', #313 ) ;
+#261 = VERTEX_POINT ( 'NONE', #314 ) ;
+#262 = VERTEX_POINT ( 'NONE', #315 ) ;
+#263 = VERTEX_POINT ( 'NONE', #316 ) ;
+#264 = VERTEX_POINT ( 'NONE', #317 ) ;
+#265 = VERTEX_POINT ( 'NONE', #318 ) ;
+#266 = VERTEX_POINT ( 'NONE', #319 ) ;
+#267 = VERTEX_POINT ( 'NONE', #320 ) ;
+#268 = VERTEX_POINT ( 'NONE', #321 ) ;
+#269 = VERTEX_POINT ( 'NONE', #322 ) ;
+#270 = VERTEX_POINT ( 'NONE', #323 ) ;
+#271 = VERTEX_POINT ( 'NONE', #324 ) ;
+#272 = VERTEX_POINT ( 'NONE', #325 ) ;
+#273 = VERTEX_POINT ( 'NONE', #326 ) ;
+#274 = VERTEX_POINT ( 'NONE', #327 ) ;
+#275 = ORIENTED_EDGE ( 'NONE', *, *, #642, .F. ) ;
+#276 = ORIENTED_EDGE ( 'NONE', *, *, #701, .T. ) ;
+#277 = ORIENTED_EDGE ( 'NONE', *, *, #685, .F. ) ;
+#278 = ORIENTED_EDGE ( 'NONE', *, *, #640, .F. ) ;
+#279 = ORIENTED_EDGE ( 'NONE', *, *, #640, .T. ) ;
+#280 = ORIENTED_EDGE ( 'NONE', *, *, #641, .T. ) ;
+#281 = ORIENTED_EDGE ( 'NONE', *, *, #688, .F. ) ;
+#282 = CARTESIAN_POINT ( 'NONE',  ( 5.408326913195987000, 76.51434852559523800, 0.9999999999998898700 ) ) ;
+#283 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000006000, 5.514348525595180700, -5.408326913196072300 ) ) ;
+#284 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.5143485255952040500, -33.00000000000000000 ) ) ;
+#285 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 81.51434852559525300, -9.500000000000000000 ) ) ;
+#286 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999922300, 5.514348525595180700, -7.000000000000200700 ) ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999991100, 5.514348525595180700, -5.408326913196093600 ) ) ;
+#288 = CARTESIAN_POINT ( 'NONE',  ( 5.408326913195987000, 5.514348525595180700, -1.000000000000021800 ) ) ;
+#289 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 5.514348525595180700, 5.408326913195871600 ) ) ;
+#290 = CARTESIAN_POINT ( 'NONE',  ( -5.408326913196006600, 5.514348525595180700, 0.9999999999999107400 ) ) ;
+#291 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000013100, 5.514348525595180700, 5.408326913195892000 ) ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( 4.041334437186266200E-015, 5.514348525595180700, 33.00000000000000000 ) ) ;
+#293 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000013100, 76.51434852559523800, 5.408326913195892000 ) ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( 5.408326913195987000, 76.51434852559523800, -1.000000000000021800 ) ) ;
+#295 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999922300, 76.51434852559523800, -7.000000000000200700 ) ) ;
+#296 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000011500, 5.514348525595180700, 0.9999999999999037400 ) ) ;
+#297 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000900, 5.514348525595180700, -1.000000000000111900 ) ) ;
+#298 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000006000, 76.51434852559523800, -5.408326913196072300 ) ) ;
+#299 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, -33.00000000000000000 ) ) ;
+#300 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999940000, 5.514348525595180700, 6.999999999999999100 ) ) ;
+#301 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 5.514348525595180700, 6.999999999999804600 ) ) ;
+#302 = CARTESIAN_POINT ( 'NONE',  ( 5.408326913195987000, 5.514348525595180700, 0.9999999999998898700 ) ) ;
+#303 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000000900, 5.514348525595180700, -6.999999999999999100 ) ) ;
+#304 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 5.514348525595180700, -1.000000000000105000 ) ) ;
+#305 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 5.514348525595180700, 0.9999999999999107400 ) ) ;
+#306 = CARTESIAN_POINT ( 'NONE',  ( 4.041334437186266200E-015, 0.5143485255952040500, 33.00000000000000000 ) ) ;
+#307 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 76.51434852559523800, 0.9999999999999107400 ) ) ;
+#308 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 81.51434852559525300, -7.500000000000000000 ) ) ;
+#309 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999940000, 76.51434852559523800, 6.999999999999999100 ) ) ;
+#310 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 76.51434852559523800, -1.000000000000105000 ) ) ;
+#311 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 76.51434852559523800, 5.408326913195871600 ) ) ;
+#312 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147900E-016, 81.51434852559525300, 7.500000000000000000 ) ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( -5.408326913196003000, 5.514348525595180700, -1.000000000000091000 ) ) ;
+#314 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000000900, 76.51434852559523800, -6.999999999999999100 ) ) ;
+#315 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000011500, 76.51434852559523800, 0.9999999999999037400 ) ) ;
+#316 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 76.51434852559523800, 6.999999999999804600 ) ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( -5.408326913196006600, 76.51434852559523800, 0.9999999999999107400 ) ) ;
+#318 = CARTESIAN_POINT ( 'NONE',  ( 3.061616997868381700E-016, 0.5143485255952040500, 2.499999999999998700 ) ) ;
+#319 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 76.51434852559523800, -7.500000000000000000 ) ) ;
+#320 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000900, 76.51434852559523800, -1.000000000000111900 ) ) ;
+#321 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999991100, 76.51434852559523800, -5.408326913196093600 ) ) ;
+#322 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, -2.499999999999998700 ) ) ;
+#323 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147900E-016, 76.51434852559523800, 7.500000000000000000 ) ) ;
+#324 = CARTESIAN_POINT ( 'NONE',  ( 2.602374448188125100E-015, 81.51434852559525300, 9.500000000000000000 ) ) ;
+#325 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.5143485255952040500, -2.499999999999998700 ) ) ;
+#326 = CARTESIAN_POINT ( 'NONE',  ( 3.061616997868381700E-016, 5.514348525595180700, 2.499999999999998700 ) ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( -5.408326913196003000, 76.51434852559523800, -1.000000000000091000 ) ) ;
+#328 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#329 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#330 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#331 = PLANE ( 'NONE',  #16 ) ;
+#332 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 96.31333839881850200, 0.9999999999999107400 ) ) ;
+#333 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#334 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#336 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#337 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#338 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#339 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#340 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#341 = LINE ( 'NONE', #342, #38 ) ;
+#342 = CARTESIAN_POINT ( 'NONE',  ( -5.408326913196003000, 0.0000000000000000000, -1.000000000000091000 ) ) ;
+#343 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#344 = PLANE ( 'NONE',  #7 ) ;
+#345 = LINE ( 'NONE', #346, #14 ) ;
+#346 = CARTESIAN_POINT ( 'NONE',  ( 3.061616997868381700E-016, 0.0000000000000000000, 2.499999999999998700 ) ) ;
+#347 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#348 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 96.31333839881850200, -1.000000000000105000 ) ) ;
+#349 = DIRECTION ( 'NONE',  ( 2.498001805406602200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#350 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -2.498001805406602200E-016 ) ) ;
+#351 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ;
+#352 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#353 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#354 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#355 = LINE ( 'NONE', #356, #20 ) ;
+#356 = CARTESIAN_POINT ( 'NONE',  ( -5.408326913196006600, 0.0000000000000000000, 0.9999999999999107400 ) ) ;
+#357 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#358 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#359 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#360 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#361 = LINE ( 'NONE', #362, #62 ) ;
+#362 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000006000, 76.51434852559523800, -1.000000000000111900 ) ) ;
+#363 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -3.469446951953614200E-017 ) ) ;
+#364 = LINE ( 'NONE', #365, #60 ) ;
+#365 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000011500, 76.51434852559523800, 0.9999999999999037400 ) ) ;
+#366 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.804112415015879400E-016 ) ) ;
+#367 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#368 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#369 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#370 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#371 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#372 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#373 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#374 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#375 = PLANE ( 'NONE',  #46 ) ;
+#376 = CARTESIAN_POINT ( 'NONE',  ( 2.500000000000004000, 0.5143485255952040500, -9.020562075079396900E-014 ) ) ;
+#377 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#378 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#379 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#380 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#381 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#382 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#383 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#384 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#385 = LINE ( 'NONE', #386, #37 ) ;
+#386 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000900, 76.51434852559523800, -1.000000000000111900 ) ) ;
+#387 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ;
+#389 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#390 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#391 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#392 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#393 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#394 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#395 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#396 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#397 = PLANE ( 'NONE',  #27 ) ;
+#398 = CARTESIAN_POINT ( 'NONE',  ( 5.499999999999978700, 76.51434852559523800, -1.110223024625156500E-013 ) ) ;
+#399 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#400 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#401 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#402 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#403 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#404 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 81.51434852559525300, 0.0000000000000000000 ) ) ;
+#405 = LINE ( 'NONE', #406, #25 ) ;
+#406 = CARTESIAN_POINT ( 'NONE',  ( 4.041334437186266200E-015, 0.0000000000000000000, 33.00000000000000000 ) ) ;
+#407 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#408 = LINE ( 'NONE', #409, #23 ) ;
+#409 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, -33.00000000000000000 ) ) ;
+#410 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.9553703930927846000, -0.2954105820747426300 ) ) ;
+#411 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#412 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#413 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#414 = LINE ( 'NONE', #415, #21 ) ;
+#415 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999991100, 76.51434852559523800, 0.9999999999999107400 ) ) ;
+#416 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -6.938893903907228400E-017 ) ) ;
+#417 = LINE ( 'NONE', #418, #18 ) ;
+#418 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000006000, 0.0000000000000000000, -5.408326913196072300 ) ) ;
+#419 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#420 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#421 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#422 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#423 = LINE ( 'NONE', #424, #17 ) ;
+#424 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000900, 96.31333839881850200, -1.000000000000111900 ) ) ;
+#425 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#426 = LINE ( 'NONE', #427, #15 ) ;
+#427 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000011500, 96.31333839881850200, 0.9999999999999037400 ) ) ;
+#428 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#429 = LINE ( 'NONE', #430, #11 ) ;
+#430 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999940000, 96.31333839881850200, 6.999999999999999100 ) ) ;
+#431 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#432 = LINE ( 'NONE', #433, #9 ) ;
+#433 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 96.31333839881850200, 6.999999999999804600 ) ) ;
+#434 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#435 = LINE ( 'NONE', #436, #6 ) ;
+#436 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 96.31333839881850200, -1.000000000000105000 ) ) ;
+#437 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#438 = LINE ( 'NONE', #439, #3 ) ;
+#439 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 96.31333839881850200, 0.9999999999999107400 ) ) ;
+#440 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#441 = LINE ( 'NONE', #442, #1 ) ;
+#442 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000000900, 96.31333839881850200, -6.999999999999999100 ) ) ;
+#443 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#444 = LINE ( 'NONE', #445, #725 ) ;
+#445 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999922300, 96.31333839881850200, -7.000000000000200700 ) ) ;
+#446 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#447 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#448 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#449 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 81.51434852559525300, 0.0000000000000000000 ) ) ;
+#450 = LINE ( 'NONE', #451, #790 ) ;
+#451 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000006000, 5.514348525595180700, -1.000000000000111900 ) ) ;
+#452 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -3.469446951953614200E-017 ) ) ;
+#453 = LINE ( 'NONE', #454, #791 ) ;
+#454 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000900, 5.514348525595180700, -1.000000000000111900 ) ) ;
+#455 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#456 = LINE ( 'NONE', #457, #769 ) ;
+#457 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000011500, 5.514348525595180700, 0.9999999999999037400 ) ) ;
+#458 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.804112415015879400E-016 ) ) ;
+#459 = LINE ( 'NONE', #460, #735 ) ;
+#460 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999991100, 5.514348525595180700, 0.9999999999998898700 ) ) ;
+#461 = DIRECTION ( 'NONE',  ( -3.469446951953614200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#462 = LINE ( 'NONE', #463, #728 ) ;
+#463 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 5.514348525595180700, 6.999999999999804600 ) ) ;
+#464 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#465 = LINE ( 'NONE', #466, #795 ) ;
+#466 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999940000, 5.514348525595180700, 6.999999999999999100 ) ) ;
+#467 = DIRECTION ( 'NONE',  ( 2.498001805406602200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#468 = LINE ( 'NONE', #469, #770 ) ;
+#469 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999991100, 5.514348525595180700, 0.9999999999999107400 ) ) ;
+#470 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -6.938893903907228400E-017 ) ) ;
+#471 = LINE ( 'NONE', #472, #732 ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 5.514348525595180700, 0.9999999999999107400 ) ) ;
+#473 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#474 = LINE ( 'NONE', #475, #793 ) ;
+#475 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 5.514348525595180700, -1.000000000000105000 ) ) ;
+#476 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 2.498001805406602200E-016 ) ) ;
+#477 = LINE ( 'NONE', #478, #764 ) ;
+#478 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000013100, 5.514348525595180700, -1.000000000000091000 ) ) ;
+#479 = DIRECTION ( 'NONE',  ( 1.457167719820518000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#480 = LINE ( 'NONE', #481, #780 ) ;
+#481 = CARTESIAN_POINT ( 'NONE',  ( 1.023486850826316200E-013, 5.514348525595180700, -6.999999999999999100 ) ) ;
+#482 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#483 = LINE ( 'NONE', #484, #754 ) ;
+#484 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999922300, 5.514348525595180700, -7.000000000000200700 ) ) ;
+#485 = DIRECTION ( 'NONE',  ( -1.110223024625156500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#486 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#487 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#488 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 81.51434852559525300, 0.0000000000000000000 ) ) ;
+#489 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#490 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#491 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#492 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#493 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#494 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.5143485255952040500, 0.0000000000000000000 ) ) ;
+#495 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#496 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#497 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.5143485255952040500, 0.0000000000000000000 ) ) ;
+#498 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#499 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#500 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#501 = LINE ( 'NONE', #502, #796 ) ;
+#502 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999991100, 0.0000000000000000000, -5.408326913196093600 ) ) ;
+#503 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#504 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#505 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#506 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#507 = LINE ( 'NONE', #508, #763 ) ;
+#508 = CARTESIAN_POINT ( 'NONE',  ( 5.408326913195987000, 0.0000000000000000000, -1.000000000000021800 ) ) ;
+#509 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#510 = LINE ( 'NONE', #511, #726 ) ;
+#511 = CARTESIAN_POINT ( 'NONE',  ( 5.408326913195987000, 0.0000000000000000000, 0.9999999999998898700 ) ) ;
+#512 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#513 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#514 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#515 = PLANE ( 'NONE',  #19 ) ;
+#516 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000006000, 96.31333839881850200, -1.000000000000111900 ) ) ;
+#517 = DIRECTION ( 'NONE',  ( -3.469446951953614200E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#518 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 3.469446951953614200E-017 ) ) ;
+#519 = PLANE ( 'NONE',  #789 ) ;
+#520 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000900, 96.31333839881850200, -1.000000000000111900 ) ) ;
+#521 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#522 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#523 = PLANE ( 'NONE',  #786 ) ;
+#524 = CARTESIAN_POINT ( 'NONE',  ( 1.023486850826316200E-013, 96.31333839881850200, -6.999999999999999100 ) ) ;
+#525 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#526 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#527 = PLANE ( 'NONE',  #782 ) ;
+#528 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999991100, 96.31333839881850200, 0.9999999999999107400 ) ) ;
+#529 = DIRECTION ( 'NONE',  ( -6.938893903907228400E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#530 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 6.938893903907228400E-017 ) ) ;
+#531 = LINE ( 'NONE', #532, #778 ) ;
+#532 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000013100, 0.0000000000000000000, 5.408326913195892000 ) ) ;
+#533 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#534 = PLANE ( 'NONE',  #774 ) ;
+#535 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000011500, 96.31333839881850200, 0.9999999999999037400 ) ) ;
+#536 = DIRECTION ( 'NONE',  ( -1.804112415015879400E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#537 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.804112415015879400E-016 ) ) ;
+#538 = PLANE ( 'NONE',  #773 ) ;
+#539 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 96.31333839881850200, 6.999999999999804600 ) ) ;
+#540 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#541 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#542 = LINE ( 'NONE', #543, #768 ) ;
+#543 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -33.00000000000000000 ) ) ;
+#544 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#545 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ;
+#546 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#547 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#548 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.5143485255952040500, 0.0000000000000000000 ) ) ;
+#549 = LINE ( 'NONE', #550, #762 ) ;
+#550 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 76.51434852559523800, -1.000000000000105000 ) ) ;
+#551 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 2.498001805406602200E-016 ) ) ;
+#552 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#553 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#554 = PLANE ( 'NONE',  #756 ) ;
+#555 = LINE ( 'NONE', #556, #757 ) ;
+#556 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000022200, 76.51434852559523800, 0.9999999999999107400 ) ) ;
+#557 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#558 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999922300, 96.31333839881850200, -7.000000000000200700 ) ) ;
+#559 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.110223024625156500E-016 ) ) ;
+#560 = DIRECTION ( 'NONE',  ( 1.110223024625156500E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#561 = PLANE ( 'NONE',  #750 ) ;
+#562 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000013100, 96.31333839881850200, -1.000000000000091000 ) ) ;
+#563 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.457167719820518000E-016 ) ) ;
+#564 = DIRECTION ( 'NONE',  ( -1.457167719820518000E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#565 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#566 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#567 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#568 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ;
+#569 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#570 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#571 = PLANE ( 'NONE',  #740 ) ;
+#572 = CARTESIAN_POINT ( 'NONE',  ( 9.499999999999996400, 81.51434852559525300, 0.0000000000000000000 ) ) ;
+#573 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#574 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#575 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 81.51434852559525300, 0.0000000000000000000 ) ) ;
+#576 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#577 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#578 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ;
+#579 = LINE ( 'NONE', #580, #738 ) ;
+#580 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147900E-016, 0.0000000000000000000, 7.500000000000000000 ) ) ;
+#581 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#582 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#583 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#584 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #857, 'distance_accuracy_value', 'NONE');
+#585 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #860, 'distance_accuracy_value', 'NONE');
+#586 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #870, 'distance_accuracy_value', 'NONE');
+#587 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'fuse', ( #888, #883 ), #760 ) ;
+#588 = PRODUCT ( 'fuse', 'fuse', '', ( #877 ) ) ;
+#589 = ADVANCED_FACE ( 'NONE', ( #45 ), #52, .F. ) ;
+#590 = ADVANCED_FACE ( 'NONE', ( #8 ), #331, .T. ) ;
+#591 = ADVANCED_FACE ( 'NONE', ( #5 ), #2, .T. ) ;
+#592 = ADVANCED_FACE ( 'NONE', ( #12 ), #36, .F. ) ;
+#593 = EDGE_CURVE ( 'NONE', #274, #260, #341, .T. ) ;
+#594 = EDGE_CURVE ( 'NONE', #273, #265, #345, .T. ) ;
+#595 = ADVANCED_FACE ( 'NONE', ( #39 ), #344, .T. ) ;
+#596 = CIRCLE ( 'NONE', #58, 5.500000000000000000 ) ;
+#597 = EDGE_CURVE ( 'NONE', #229, #258, #596, .T. ) ;
+#598 = EDGE_CURVE ( 'NONE', #237, #264, #355, .T. ) ;
+#599 = EDGE_CURVE ( 'NONE', #273, #269, #635, .T. ) ;
+#600 = EDGE_CURVE ( 'NONE', #267, #241, #361, .T. ) ;
+#601 = EDGE_CURVE ( 'NONE', #229, #262, #364, .T. ) ;
+#602 = ADVANCED_FACE ( 'NONE', ( #57 ), #63, .F. ) ;
+#603 = ADVANCED_FACE ( 'NONE', ( #26 ), #54, .F. ) ;
+#604 = ADVANCED_FACE ( 'NONE', ( #56 ), #634, .T. ) ;
+#605 = ADVANCED_FACE ( 'NONE', ( #51, #49 ), #375, .T. ) ;
+#606 = EDGE_CURVE ( 'NONE', #238, #237, #636, .T. ) ;
+#607 = ADVANCED_FACE ( 'NONE', ( #53 ), #42, .F. ) ;
+#608 = EDGE_CURVE ( 'NONE', #262, #267, #385, .T. ) ;
+#609 = EDGE_CURVE ( 'NONE', #268, #241, #632, .T. ) ;
+#610 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #588 ) ) ;
+#611 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #879, #889 ) ;
+#612 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#613 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#614 = CIRCLE ( 'NONE', #719, 5.500000000000000000 ) ;
+#615 = CIRCLE ( 'NONE', #727, 5.500000000000000000 ) ;
+#616 = CIRCLE ( 'NONE', #781, 2.499999999999998700 ) ;
+#617 = CIRCLE ( 'NONE', #741, 7.500000000000000000 ) ;
+#618 = CONICAL_SURFACE ( 'NONE', #745, 33.00000000000000000, 0.2998852523246795500 ) ;
+#619 = CIRCLE ( 'NONE', #739, 7.500000000000000000 ) ;
+#620 = CIRCLE ( 'NONE', #767, 33.00000000000000000 ) ;
+#621 = CIRCLE ( 'NONE', #772, 7.500000000000000000 ) ;
+#622 = CIRCLE ( 'NONE', #794, 5.500000000000000000 ) ;
+#623 = CIRCLE ( 'NONE', #771, 5.500000000000000000 ) ;
+#624 = CIRCLE ( 'NONE', #779, 33.00000000000000000 ) ;
+#625 = CIRCLE ( 'NONE', #776, 2.499999999999998700 ) ;
+#626 = CIRCLE ( 'NONE', #755, 33.00000000000000000 ) ;
+#627 = CIRCLE ( 'NONE', #751, 9.500000000000000000 ) ;
+#628 = CIRCLE ( 'NONE', #775, 7.500000000000000000 ) ;
+#629 = CIRCLE ( 'NONE', #4, 2.499999999999998700 ) ;
+#630 = CIRCLE ( 'NONE', #22, 5.500000000000000000 ) ;
+#631 = CIRCLE ( 'NONE', #28, 33.00000000000000000 ) ;
+#632 = CIRCLE ( 'NONE', #48, 5.500000000000000000 ) ;
+#633 = CIRCLE ( 'NONE', #24, 9.500000000000000000 ) ;
+#634 = CONICAL_SURFACE ( 'NONE', #50, 33.00000000000000000, 0.2998852523246795500 ) ;
+#635 = CIRCLE ( 'NONE', #30, 2.499999999999998700 ) ;
+#636 = CIRCLE ( 'NONE', #47, 5.500000000000000000 ) ;
+#637 = ADVANCED_FACE ( 'NONE', ( #44 ), #34, .F. ) ;
+#638 = ADVANCED_FACE ( 'NONE', ( #35 ), #31, .F. ) ;
+#639 = ADVANCED_FACE ( 'NONE', ( #33, #29 ), #397, .T. ) ;
+#640 = EDGE_CURVE ( 'NONE', #246, #239, #631, .T. ) ;
+#641 = EDGE_CURVE ( 'NONE', #239, #253, #405, .T. ) ;
+#642 = EDGE_CURVE ( 'NONE', #232, #246, #408, .T. ) ;
+#643 = EDGE_CURVE ( 'NONE', #232, #271, #633, .T. ) ;
+#644 = EDGE_CURVE ( 'NONE', #254, #264, #414, .T. ) ;
+#645 = EDGE_CURVE ( 'NONE', #230, #245, #417, .T. ) ;
+#646 = EDGE_CURVE ( 'NONE', #260, #230, #630, .T. ) ;
+#647 = EDGE_CURVE ( 'NONE', #267, #244, #423, .T. ) ;
+#648 = EDGE_CURVE ( 'NONE', #262, #243, #426, .T. ) ;
+#649 = EDGE_CURVE ( 'NONE', #256, #247, #429, .T. ) ;
+#650 = EDGE_CURVE ( 'NONE', #263, #248, #432, .T. ) ;
+#651 = EDGE_CURVE ( 'NONE', #257, #251, #435, .T. ) ;
+#652 = EDGE_CURVE ( 'NONE', #254, #252, #438, .T. ) ;
+#653 = EDGE_CURVE ( 'NONE', #261, #250, #441, .T. ) ;
+#654 = EDGE_CURVE ( 'NONE', #242, #233, #444, .T. ) ;
+#655 = EDGE_CURVE ( 'NONE', #269, #273, #629, .T. ) ;
+#656 = EDGE_CURVE ( 'NONE', #244, #235, #450, .T. ) ;
+#657 = EDGE_CURVE ( 'NONE', #243, #244, #453, .T. ) ;
+#658 = EDGE_CURVE ( 'NONE', #249, #243, #456, .T. ) ;
+#659 = EDGE_CURVE ( 'NONE', #248, #236, #459, .T. ) ;
+#660 = EDGE_CURVE ( 'NONE', #247, #248, #462, .T. ) ;
+#661 = EDGE_CURVE ( 'NONE', #238, #247, #465, .T. ) ;
+#662 = EDGE_CURVE ( 'NONE', #252, #237, #468, .T. ) ;
+#663 = EDGE_CURVE ( 'NONE', #251, #252, #471, .T. ) ;
+#664 = EDGE_CURVE ( 'NONE', #260, #251, #474, .T. ) ;
+#665 = EDGE_CURVE ( 'NONE', #250, #230, #477, .T. ) ;
+#666 = EDGE_CURVE ( 'NONE', #233, #250, #480, .T. ) ;
+#667 = EDGE_CURVE ( 'NONE', #234, #233, #483, .T. ) ;
+#668 = EDGE_CURVE ( 'NONE', #255, #259, #628, .T. ) ;
+#669 = EDGE_CURVE ( 'NONE', #271, #232, #627, .T. ) ;
+#670 = EDGE_CURVE ( 'NONE', #239, #246, #626, .T. ) ;
+#671 = EDGE_CURVE ( 'NONE', #272, #265, #625, .T. ) ;
+#672 = EDGE_CURVE ( 'NONE', #253, #231, #624, .T. ) ;
+#673 = EDGE_CURVE ( 'NONE', #268, #234, #501, .T. ) ;
+#674 = EDGE_CURVE ( 'NONE', #234, #235, #623, .T. ) ;
+#675 = EDGE_CURVE ( 'NONE', #235, #241, #507, .T. ) ;
+#676 = EDGE_CURVE ( 'NONE', #229, #249, #510, .T. ) ;
+#677 = EDGE_CURVE ( 'NONE', #249, #236, #622, .T. ) ;
+#678 = ADVANCED_FACE ( 'NONE', ( #777 ), #515, .T. ) ;
+#679 = ADVANCED_FACE ( 'NONE', ( #736 ), #519, .T. ) ;
+#680 = ADVANCED_FACE ( 'NONE', ( #792 ), #523, .T. ) ;
+#681 = ADVANCED_FACE ( 'NONE', ( #785 ), #527, .T. ) ;
+#682 = EDGE_CURVE ( 'NONE', #240, #238, #531, .T. ) ;
+#683 = ADVANCED_FACE ( 'NONE', ( #784 ), #534, .T. ) ;
+#684 = ADVANCED_FACE ( 'NONE', ( #718 ), #538, .T. ) ;
+#685 = EDGE_CURVE ( 'NONE', #246, #231, #542, .T. ) ;
+#686 = EDGE_CURVE ( 'NONE', #266, #270, #621, .T. ) ;
+#687 = EDGE_CURVE ( 'NONE', #274, #257, #549, .T. ) ;
+#688 = EDGE_CURVE ( 'NONE', #231, #253, #620, .T. ) ;
+#689 = EDGE_CURVE ( 'NONE', #257, #254, #555, .T. ) ;
+#690 = ADVANCED_FACE ( 'NONE', ( #788 ), #554, .T. ) ;
+#691 = ADVANCED_FACE ( 'NONE', ( #758 ), #561, .T. ) ;
+#692 = ADVANCED_FACE ( 'NONE', ( #753 ), #748, .T. ) ;
+#693 = ADVANCED_FACE ( 'NONE', ( #749 ), #618, .T. ) ;
+#694 = ADVANCED_FACE ( 'NONE', ( #747, #744 ), #571, .T. ) ;
+#695 = EDGE_CURVE ( 'NONE', #259, #255, #617, .T. ) ;
+#696 = EDGE_CURVE ( 'NONE', #259, #270, #579, .T. ) ;
+#697 = EDGE_CURVE ( 'NONE', #270, #266, #619, .T. ) ;
+#698 = EDGE_CURVE ( 'NONE', #265, #272, #616, .T. ) ;
+#699 = EDGE_CURVE ( 'NONE', #255, #266, #801, .T. ) ;
+#700 = EDGE_CURVE ( 'NONE', #269, #272, #804, .T. ) ;
+#701 = EDGE_CURVE ( 'NONE', #271, #239, #807, .T. ) ;
+#702 = EDGE_CURVE ( 'NONE', #263, #258, #810, .T. ) ;
+#703 = EDGE_CURVE ( 'NONE', #256, #263, #813, .T. ) ;
+#704 = EDGE_CURVE ( 'NONE', #240, #256, #816, .T. ) ;
+#705 = EDGE_CURVE ( 'NONE', #240, #264, #615, .T. ) ;
+#706 = EDGE_CURVE ( 'NONE', #236, #258, #822, .T. ) ;
+#707 = ADVANCED_FACE ( 'NONE', ( #742 ), #821, .T. ) ;
+#708 = ADVANCED_FACE ( 'NONE', ( #787 ), #828, .T. ) ;
+#709 = EDGE_CURVE ( 'NONE', #268, #242, #832, .T. ) ;
+#710 = EDGE_CURVE ( 'NONE', #242, #261, #836, .T. ) ;
+#711 = EDGE_CURVE ( 'NONE', #274, #245, #614, .T. ) ;
+#712 = EDGE_CURVE ( 'NONE', #261, #245, #842, .T. ) ;
+#713 = ADVANCED_FACE ( 'NONE', ( #717 ), #724, .F. ) ;
+#714 = ADVANCED_FACE ( 'NONE', ( #731, #783 ), #847, .T. ) ;
+#715 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#716 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#717 = FACE_OUTER_BOUND ( 'NONE', #74, .T. ) ;
+#718 = FACE_OUTER_BOUND ( 'NONE', #93, .T. ) ;
+#719 = AXIS2_PLACEMENT_3D ( 'NONE', #835, #839, #840 ) ;
+#720 = VECTOR ( 'NONE', #815, 1000.000000000000000 ) ;
+#721 = AXIS2_PLACEMENT_3D ( 'NONE', #825, #826, #827 ) ;
+#722 = AXIS2_PLACEMENT_3D ( 'NONE', #829, #830, #831 ) ;
+#723 = VECTOR ( 'NONE', #812, 1000.000000000000000 ) ;
+#724 = CYLINDRICAL_SURFACE ( 'NONE', #743, 5.500000000000000000 ) ;
+#725 = VECTOR ( 'NONE', #446, 1000.000000000000000 ) ;
+#726 = VECTOR ( 'NONE', #512, 1000.000000000000000 ) ;
+#727 = AXIS2_PLACEMENT_3D ( 'NONE', #800, #819, #820 ) ;
+#728 = VECTOR ( 'NONE', #464, 1000.000000000000000 ) ;
+#729 = VECTOR ( 'NONE', #809, 1000.000000000000000 ) ;
+#730 = VECTOR ( 'NONE', #806, 1000.000000000000000 ) ;
+#731 = FACE_OUTER_BOUND ( 'NONE', #82, .T. ) ;
+#732 = VECTOR ( 'NONE', #473, 1000.000000000000000 ) ;
+#733 = VECTOR ( 'NONE', #803, 1000.000000000000000 ) ;
+#734 = VECTOR ( 'NONE', #834, 1000.000000000000000 ) ;
+#735 = VECTOR ( 'NONE', #461, 1000.000000000000000 ) ;
+#736 = FACE_OUTER_BOUND ( 'NONE', #95, .T. ) ;
+#737 = VECTOR ( 'NONE', #844, 1000.000000000000000 ) ;
+#738 = VECTOR ( 'NONE', #581, 1000.000000000000000 ) ;
+#739 = AXIS2_PLACEMENT_3D ( 'NONE', #578, #582, #583 ) ;
+#740 = AXIS2_PLACEMENT_3D ( 'NONE', #572, #573, #574 ) ;
+#741 = AXIS2_PLACEMENT_3D ( 'NONE', #575, #576, #577 ) ;
+#742 = FACE_OUTER_BOUND ( 'NONE', #91, .T. ) ;
+#743 = AXIS2_PLACEMENT_3D ( 'NONE', #841, #845, #846 ) ;
+#744 = FACE_OUTER_BOUND ( 'NONE', #80, .T. ) ;
+#745 = AXIS2_PLACEMENT_3D ( 'NONE', #568, #569, #570 ) ;
+#746 = VECTOR ( 'NONE', #824, 1000.000000000000000 ) ;
+#747 = FACE_BOUND ( 'NONE', #79, .T. ) ;
+#748 = CYLINDRICAL_SURFACE ( 'NONE', #766, 33.00000000000000000 ) ;
+#749 = FACE_OUTER_BOUND ( 'NONE', #78, .T. ) ;
+#750 = AXIS2_PLACEMENT_3D ( 'NONE', #562, #563, #564 ) ;
+#751 = AXIS2_PLACEMENT_3D ( 'NONE', #488, #489, #490 ) ;
+#752 = VECTOR ( 'NONE', #818, 1000.000000000000000 ) ;
+#753 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ;
+#754 = VECTOR ( 'NONE', #485, 1000.000000000000000 ) ;
+#755 = AXIS2_PLACEMENT_3D ( 'NONE', #491, #492, #493 ) ;
+#756 = AXIS2_PLACEMENT_3D ( 'NONE', #558, #559, #560 ) ;
+#757 = VECTOR ( 'NONE', #557, 1000.000000000000000 ) ;
+#758 = FACE_OUTER_BOUND ( 'NONE', #86, .T. ) ;
+#759 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #584 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #857, #858, #859 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#760 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #585 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #860, #861, #862 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#761 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #586 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #870, #871, #872 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#762 = VECTOR ( 'NONE', #551, 1000.000000000000000 ) ;
+#763 = VECTOR ( 'NONE', #509, 1000.000000000000000 ) ;
+#764 = VECTOR ( 'NONE', #479, 1000.000000000000000 ) ;
+#765 = VECTOR ( 'NONE', #838, 1000.000000000000000 ) ;
+#766 = AXIS2_PLACEMENT_3D ( 'NONE', #565, #566, #567 ) ;
+#767 = AXIS2_PLACEMENT_3D ( 'NONE', #548, #552, #553 ) ;
+#768 = VECTOR ( 'NONE', #544, 1000.000000000000000 ) ;
+#769 = VECTOR ( 'NONE', #458, 1000.000000000000000 ) ;
+#770 = VECTOR ( 'NONE', #470, 1000.000000000000000 ) ;
+#771 = AXIS2_PLACEMENT_3D ( 'NONE', #500, #504, #505 ) ;
+#772 = AXIS2_PLACEMENT_3D ( 'NONE', #545, #546, #547 ) ;
+#773 = AXIS2_PLACEMENT_3D ( 'NONE', #539, #540, #541 ) ;
+#774 = AXIS2_PLACEMENT_3D ( 'NONE', #535, #536, #537 ) ;
+#775 = AXIS2_PLACEMENT_3D ( 'NONE', #449, #486, #487 ) ;
+#776 = AXIS2_PLACEMENT_3D ( 'NONE', #494, #495, #496 ) ;
+#777 = FACE_OUTER_BOUND ( 'NONE', #96, .T. ) ;
+#778 = VECTOR ( 'NONE', #533, 1000.000000000000000 ) ;
+#779 = AXIS2_PLACEMENT_3D ( 'NONE', #497, #498, #499 ) ;
+#780 = VECTOR ( 'NONE', #482, 1000.000000000000000 ) ;
+#781 = AXIS2_PLACEMENT_3D ( 'NONE', #797, #798, #799 ) ;
+#782 = AXIS2_PLACEMENT_3D ( 'NONE', #528, #529, #530 ) ;
+#783 = FACE_BOUND ( 'NONE', #83, .T. ) ;
+#784 = FACE_OUTER_BOUND ( 'NONE', #94, .T. ) ;
+#785 = FACE_OUTER_BOUND ( 'NONE', #88, .T. ) ;
+#786 = AXIS2_PLACEMENT_3D ( 'NONE', #524, #525, #526 ) ;
+#787 = FACE_OUTER_BOUND ( 'NONE', #92, .T. ) ;
+#788 = FACE_OUTER_BOUND ( 'NONE', #85, .T. ) ;
+#789 = AXIS2_PLACEMENT_3D ( 'NONE', #520, #521, #522 ) ;
+#790 = VECTOR ( 'NONE', #452, 1000.000000000000000 ) ;
+#791 = VECTOR ( 'NONE', #455, 1000.000000000000000 ) ;
+#792 = FACE_OUTER_BOUND ( 'NONE', #87, .T. ) ;
+#793 = VECTOR ( 'NONE', #476, 1000.000000000000000 ) ;
+#794 = AXIS2_PLACEMENT_3D ( 'NONE', #506, #513, #514 ) ;
+#795 = VECTOR ( 'NONE', #467, 1000.000000000000000 ) ;
+#796 = VECTOR ( 'NONE', #503, 1000.000000000000000 ) ;
+#797 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.5143485255952040500, 0.0000000000000000000 ) ) ;
+#798 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#799 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#800 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ;
+#801 = LINE ( 'NONE', #802, #733 ) ;
+#802 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000000000 ) ) ;
+#803 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#804 = LINE ( 'NONE', #805, #730 ) ;
+#805 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.499999999999998700 ) ) ;
+#806 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#807 = LINE ( 'NONE', #808, #729 ) ;
+#808 = CARTESIAN_POINT ( 'NONE',  ( 4.041334437186266200E-015, 5.514348525595180700, 33.00000000000000000 ) ) ;
+#809 = DIRECTION ( 'NONE',  ( 3.617736237720900300E-017, -0.9553703930927846000, 0.2954105820747426300 ) ) ;
+#810 = LINE ( 'NONE', #811, #723 ) ;
+#811 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999991100, 76.51434852559523800, 0.9999999999998898700 ) ) ;
+#812 = DIRECTION ( 'NONE',  ( -3.469446951953614200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#813 = LINE ( 'NONE', #814, #720 ) ;
+#814 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 76.51434852559523800, 6.999999999999804600 ) ) ;
+#815 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#816 = LINE ( 'NONE', #817, #752 ) ;
+#817 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999940000, 76.51434852559523800, 6.999999999999999100 ) ) ;
+#818 = DIRECTION ( 'NONE',  ( 2.498001805406602200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#819 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#820 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#821 = PLANE ( 'NONE',  #721 ) ;
+#822 = LINE ( 'NONE', #823, #746 ) ;
+#823 = CARTESIAN_POINT ( 'NONE',  ( 1.000000000000009500, 0.0000000000000000000, 5.408326913195871600 ) ) ;
+#824 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#825 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999991100, 96.31333839881850200, 0.9999999999998898700 ) ) ;
+#826 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 3.469446951953614200E-017 ) ) ;
+#827 = DIRECTION ( 'NONE',  ( 3.469446951953614200E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#828 = PLANE ( 'NONE',  #722 ) ;
+#829 = CARTESIAN_POINT ( 'NONE',  ( -0.9999999999999940000, 96.31333839881850200, 6.999999999999999100 ) ) ;
+#830 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -2.498001805406602200E-016 ) ) ;
+#831 = DIRECTION ( 'NONE',  ( -2.498001805406602200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#832 = LINE ( 'NONE', #833, #734 ) ;
+#833 = CARTESIAN_POINT ( 'NONE',  ( 0.9999999999999922300, 76.51434852559523800, -7.000000000000200700 ) ) ;
+#834 = DIRECTION ( 'NONE',  ( -1.110223024625156500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#835 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ;
+#836 = LINE ( 'NONE', #837, #765 ) ;
+#837 = CARTESIAN_POINT ( 'NONE',  ( 1.023486850826316200E-013, 76.51434852559523800, -6.999999999999999100 ) ) ;
+#838 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#839 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#840 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#841 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#842 = LINE ( 'NONE', #843, #737 ) ;
+#843 = CARTESIAN_POINT ( 'NONE',  ( -1.000000000000013100, 76.51434852559523800, -1.000000000000091000 ) ) ;
+#844 = DIRECTION ( 'NONE',  ( 1.457167719820518000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#845 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#846 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#847 = PLANE ( 'NONE',  #884 ) ;
+#848 = CARTESIAN_POINT ( 'NONE',  ( 5.499999999999978700, 5.514348525595180700, -1.110223024625156500E-013 ) ) ;
+#849 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#850 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#851 = FILL_AREA_STYLE_COLOUR ( '', #612 ) ;
+#852 = FILL_AREA_STYLE ('',( #851 ) ) ;
+#853 = SURFACE_STYLE_FILL_AREA ( #852 ) ;
+#854 = SURFACE_SIDE_STYLE ('',( #853 ) ) ;
+#855 = SURFACE_STYLE_USAGE ( .BOTH. , #854 ) ;
+#856 = PRESENTATION_STYLE_ASSIGNMENT (( #855 ) ) ;
+#857 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#858 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#859 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#860 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#861 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#862 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#863 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #715 ) ;
+#864 = FILL_AREA_STYLE_COLOUR ( '', #613 ) ;
+#865 = FILL_AREA_STYLE ('',( #864 ) ) ;
+#866 = SURFACE_STYLE_FILL_AREA ( #865 ) ;
+#867 = SURFACE_SIDE_STYLE ('',( #866 ) ) ;
+#868 = SURFACE_STYLE_USAGE ( .BOTH. , #867 ) ;
+#869 = PRESENTATION_STYLE_ASSIGNMENT (( #868 ) ) ;
+#870 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#871 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#872 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#873 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#874 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#875 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#876 = SHAPE_DEFINITION_REPRESENTATION ( #890, #587 ) ;
+#877 = PRODUCT_CONTEXT ( 'NONE', #715, 'mechanical' ) ;
+#878 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #716 ) ;
+#879 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #588, .NOT_KNOWN. ) ;
+#880 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #886 ) ) ;
+#881 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #886 ), #761 ) ;
+#882 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #885 ), #759 ) ;
+#883 = AXIS2_PLACEMENT_3D ( 'NONE', #873, #874, #875 ) ;
+#884 = AXIS2_PLACEMENT_3D ( 'NONE', #848, #849, #850 ) ;
+#885 = STYLED_ITEM ( 'NONE', ( #856 ), #888 ) ;
+#886 = STYLED_ITEM ( 'NONE', ( #869 ), #587 ) ;
+#887 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #885 ) ) ;
+#888 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude1', #10 ) ;
+#889 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #716, 'design' ) ;
+#890 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #611 ) ;
+ENDSEC;
+END-ISO-10303-21;

Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/hammer.step

@@ -0,0 +1,237 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('hammer.step',
+    '2014-03-25T03:39:24',
+    ( 'eric' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2012',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = VECTOR ( 'NONE', #138, 1000.000000000000000 ) ;
+#2 = FACE_OUTER_BOUND ( 'NONE', #44, .T. ) ;
+#3 = AXIS2_PLACEMENT_3D ( 'NONE', #144, #143, #142 ) ;
+#4 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #177, .NOT_KNOWN. ) ;
+#5 = AXIS2_PLACEMENT_3D ( 'NONE', #132, #131, #130 ) ;
+#6 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #65, #64 ) ;
+#7 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #14 ), #178 ) ;
+#8 = FACE_OUTER_BOUND ( 'NONE', #49, .T. ) ;
+#9 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #128, #127 ) ;
+#10 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #14 ) ) ;
+#11 = CLOSED_SHELL ( 'NONE', ( #208, #209, #180, #198, #199, #200, #207 ) ) ;
+#12 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #21 ), #213 ) ;
+#13 = VECTOR ( 'NONE', #89, 1000.000000000000000 ) ;
+#14 = STYLED_ITEM ( 'NONE', ( #70 ), #217 ) ;
+#15 = FACE_OUTER_BOUND ( 'NONE', #51, .T. ) ;
+#16 = AXIS2_PLACEMENT_3D ( 'NONE', #141, #137, #136 ) ;
+#17 = FACE_OUTER_BOUND ( 'NONE', #50, .T. ) ;
+#18 = AXIS2_PLACEMENT_3D ( 'NONE', #135, #134, #133 ) ;
+#19 = CYLINDRICAL_SURFACE ( 'NONE', #20, 1.500000000000012000 ) ;
+#20 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #93, #92 ) ;
+#21 = STYLED_ITEM ( 'NONE', ( #83 ), #214 ) ;
+#22 = CYLINDRICAL_SURFACE ( 'NONE', #28, 2.000000000000007100 ) ;
+#23 = FACE_OUTER_BOUND ( 'NONE', #46, .T. ) ;
+#24 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #99, #98 ) ;
+#25 = FACE_OUTER_BOUND ( 'NONE', #45, .T. ) ;
+#26 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #146, #145 ) ;
+#27 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #103, #102 ) ;
+#28 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #96, #95 ) ;
+#29 = CYLINDRICAL_SURFACE ( 'NONE', #9, 1.500000000000012000 ) ;
+#30 = VECTOR ( 'NONE', #110, 1000.000000000000000 ) ;
+#31 = AXIS2_PLACEMENT_3D ( 'NONE', #116, #109, #108 ) ;
+#32 = VECTOR ( 'NONE', #113, 1000.000000000000000 ) ;
+#33 = AXIS2_PLACEMENT_3D ( 'NONE', #107, #106, #105 ) ;
+#34 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #21 ) ) ;
+#35 = CYLINDRICAL_SURFACE ( 'NONE', #40, 2.000000000000007100 ) ;
+#36 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #124, #123 ) ;
+#37 = AXIS2_PLACEMENT_3D ( 'NONE', #119, #118, #117 ) ;
+#38 = FACE_OUTER_BOUND ( 'NONE', #48, .T. ) ;
+#39 = FACE_BOUND ( 'NONE', #47, .T. ) ;
+#40 = AXIS2_PLACEMENT_3D ( 'NONE', #122, #121, #120 ) ;
+#41 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ;
+#42 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #194, .F. ) ;
+#44 = EDGE_LOOP ( 'NONE', ( #173, #174 ) ) ;
+#45 = EDGE_LOOP ( 'NONE', ( #54, #57, #56, #52 ) ) ;
+#46 = EDGE_LOOP ( 'NONE', ( #53, #42, #41, #43 ) ) ;
+#47 = EDGE_LOOP ( 'NONE', ( #158, #157 ) ) ;
+#48 = EDGE_LOOP ( 'NONE', ( #159, #160, #161, #59 ) ) ;
+#49 = EDGE_LOOP ( 'NONE', ( #162, #163 ) ) ;
+#50 = EDGE_LOOP ( 'NONE', ( #172, #176, #58, #175 ) ) ;
+#51 = EDGE_LOOP ( 'NONE', ( #60, #55 ) ) ;
+#52 = ORIENTED_EDGE ( 'NONE', *, *, #202, .F. ) ;
+#53 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #205, .T. ) ;
+#55 = ORIENTED_EDGE ( 'NONE', *, *, #197, .F. ) ;
+#56 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ;
+#57 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ;
+#58 = ORIENTED_EDGE ( 'NONE', *, *, #194, .T. ) ;
+#59 = ORIENTED_EDGE ( 'NONE', *, *, #193, .F. ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #205, .F. ) ;
+#61 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #211 ) ;
+#62 = PRODUCT_CONTEXT ( 'NONE', #212, 'mechanical' ) ;
+#63 = SHAPE_DEFINITION_REPRESENTATION ( #215, #217 ) ;
+#64 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#65 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#68 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#69 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#70 = PRESENTATION_STYLE_ASSIGNMENT (( #71 ) ) ;
+#71 = SURFACE_STYLE_USAGE ( .BOTH. , #72 ) ;
+#72 = SURFACE_SIDE_STYLE ('',( #73 ) ) ;
+#73 = SURFACE_STYLE_FILL_AREA ( #74 ) ;
+#74 = FILL_AREA_STYLE ('',( #75 ) ) ;
+#75 = FILL_AREA_STYLE_COLOUR ( '', #185 ) ;
+#76 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #212 ) ;
+#77 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#78 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#79 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#80 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#81 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#82 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#83 = PRESENTATION_STYLE_ASSIGNMENT (( #84 ) ) ;
+#84 = SURFACE_STYLE_USAGE ( .BOTH. , #85 ) ;
+#85 = SURFACE_SIDE_STYLE ('',( #86 ) ) ;
+#86 = SURFACE_STYLE_FILL_AREA ( #87 ) ;
+#87 = FILL_AREA_STYLE ('',( #88 ) ) ;
+#88 = FILL_AREA_STYLE_COLOUR ( '', #184 ) ;
+#89 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( 2.000000000000012000, 11.00000000000001100, 4.185053720765721200E-014 ) ) ;
+#91 = LINE ( 'NONE', #90, #13 ) ;
+#92 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781487300E-017 ) ) ;
+#93 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ;
+#95 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ;
+#96 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#97 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ;
+#98 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -3.548298019043442700E-016, -1.387778780781436000E-017 ) ) ;
+#99 = DIRECTION ( 'NONE',  ( -3.548298019043442700E-016, -1.000000000000000000, -2.157041537713712900E-032 ) ) ;
+#100 = CARTESIAN_POINT ( 'NONE',  ( 1.999999999999996700, 11.00000000000001100, 0.0000000000000000000 ) ) ;
+#101 = PLANE ( 'NONE',  #24 ) ;
+#102 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781490700E-017 ) ) ;
+#103 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#104 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 10.50000000000000900, 4.163336342344337000E-014 ) ) ;
+#105 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ;
+#106 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#107 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 10.50000000000000900, 4.163336342344337000E-014 ) ) ;
+#108 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.548298019043442700E-016, 1.387778780781483600E-017 ) ) ;
+#109 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#110 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#111 = CARTESIAN_POINT ( 'NONE',  ( 1.500000000000017100, 11.00000000000001100, 4.179624376160375100E-014 ) ) ;
+#112 = LINE ( 'NONE', #111, #30 ) ;
+#113 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#114 = CARTESIAN_POINT ( 'NONE',  ( -2.000000000000001800, 11.00000000000001100, 4.166111899905899900E-014 ) ) ;
+#115 = LINE ( 'NONE', #114, #32 ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( 1.734723475976807100E-015, 0.0000000000000000000, 4.163336342344337000E-014 ) ) ;
+#117 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ;
+#118 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#119 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ;
+#120 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ;
+#121 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#122 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ;
+#123 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.548298019043442700E-016, 1.387778780781436000E-017 ) ) ;
+#124 = DIRECTION ( 'NONE',  ( 3.548298019043442700E-016, 1.000000000000000000, 2.157041537713712900E-032 ) ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( 1.500000000000037700, 10.50000000000000900, -3.469446951953614200E-014 ) ) ;
+#126 = PLANE ( 'NONE',  #36 ) ;
+#127 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781487300E-017 ) ) ;
+#128 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#129 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ;
+#130 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ;
+#131 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 10.50000000000000900, 4.163336342344337000E-014 ) ) ;
+#133 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781490700E-017 ) ) ;
+#134 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#135 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 10.50000000000000900, 4.163336342344337000E-014 ) ) ;
+#136 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.548298019043442700E-016, 1.387778780781483600E-017 ) ) ;
+#137 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#138 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( -1.500000000000006700, 11.00000000000001100, 4.165418010515509200E-014 ) ) ;
+#140 = LINE ( 'NONE', #139, #1 ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( 1.734723475976807100E-015, 0.0000000000000000000, 4.163336342344337000E-014 ) ) ;
+#142 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ;
+#143 = DIRECTION ( 'NONE',  ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ;
+#145 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.548298019043442700E-016, 1.387778780781436000E-017 ) ) ;
+#146 = DIRECTION ( 'NONE',  ( 3.548298019043442700E-016, 1.000000000000000000, 2.157041537713712900E-032 ) ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( 1.734723475976807100E-015, 0.0000000000000000000, 4.163336342344337000E-014 ) ) ;
+#148 = PLANE ( 'NONE',  #26 ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( -2.000000000000001800, 10.50000000000000900, 4.166111899905899900E-014 ) ) ;
+#150 = CARTESIAN_POINT ( 'NONE',  ( -1.500000000000003100, 10.50000000000000900, 4.165418010515509200E-014 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 1.500000000000002900, 10.50000000000000900, 4.179624376160375100E-014 ) ) ;
+#152 = CARTESIAN_POINT ( 'NONE',  ( 1.500000000000006900, -5.322447028565272500E-016, 4.179624376160375100E-014 ) ) ;
+#153 = CARTESIAN_POINT ( 'NONE',  ( -1.500000000000014200, 5.322447028565220300E-016, 4.165418010515509200E-014 ) ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( -2.000000000000001800, 11.00000000000001100, 4.166111899905899900E-014 ) ) ;
+#155 = CARTESIAN_POINT ( 'NONE',  ( 1.999999999999997800, 11.00000000000001100, 4.185053720765721200E-014 ) ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( 1.999999999999997800, 10.50000000000000900, 4.185053720765721200E-014 ) ) ;
+#157 = ORIENTED_EDGE ( 'NONE', *, *, #196, .T. ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #210, .F. ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #197, .T. ) ;
+#161 = ORIENTED_EDGE ( 'NONE', *, *, #202, .T. ) ;
+#162 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #193, .T. ) ;
+#164 = VERTEX_POINT ( 'NONE', #156 ) ;
+#165 = VERTEX_POINT ( 'NONE', #155 ) ;
+#166 = VERTEX_POINT ( 'NONE', #154 ) ;
+#167 = VERTEX_POINT ( 'NONE', #153 ) ;
+#168 = VERTEX_POINT ( 'NONE', #152 ) ;
+#169 = VERTEX_POINT ( 'NONE', #151 ) ;
+#170 = VERTEX_POINT ( 'NONE', #150 ) ;
+#171 = VERTEX_POINT ( 'NONE', #149 ) ;
+#172 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ;
+#173 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ;
+#174 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
+#175 = ORIENTED_EDGE ( 'NONE', *, *, #196, .F. ) ;
+#176 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
+#177 = PRODUCT ( 'hammer', 'hammer', '', ( #62 ) ) ;
+#178 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #218 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #69, #68, #67 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#179 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #219 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #79, #78, #77 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#180 = ADVANCED_FACE ( 'NONE', ( #2 ), #148, .F. ) ;
+#181 = CIRCLE ( 'NONE', #18, 1.500000000000008200 ) ;
+#182 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #177 ) ) ;
+#183 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #4, #216 ) ;
+#184 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#185 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#186 = CIRCLE ( 'NONE', #27, 1.500000000000008200 ) ;
+#187 = CIRCLE ( 'NONE', #33, 2.000000000000007100 ) ;
+#188 = CIRCLE ( 'NONE', #37, 2.000000000000007100 ) ;
+#189 = CIRCLE ( 'NONE', #3, 2.000000000000007100 ) ;
+#190 = CIRCLE ( 'NONE', #31, 1.500000000000015800 ) ;
+#191 = CIRCLE ( 'NONE', #5, 2.000000000000007100 ) ;
+#192 = CIRCLE ( 'NONE', #16, 1.500000000000015800 ) ;
+#193 = EDGE_CURVE ( 'NONE', #165, #166, #189, .T. ) ;
+#194 = EDGE_CURVE ( 'NONE', #167, #170, #140, .T. ) ;
+#195 = EDGE_CURVE ( 'NONE', #168, #167, #192, .T. ) ;
+#196 = EDGE_CURVE ( 'NONE', #169, #170, #181, .T. ) ;
+#197 = EDGE_CURVE ( 'NONE', #164, #171, #191, .T. ) ;
+#198 = ADVANCED_FACE ( 'NONE', ( #17 ), #29, .T. ) ;
+#199 = ADVANCED_FACE ( 'NONE', ( #15, #39 ), #126, .F. ) ;
+#200 = ADVANCED_FACE ( 'NONE', ( #38 ), #35, .T. ) ;
+#201 = EDGE_CURVE ( 'NONE', #166, #165, #188, .T. ) ;
+#202 = EDGE_CURVE ( 'NONE', #171, #166, #115, .T. ) ;
+#203 = EDGE_CURVE ( 'NONE', #168, #169, #112, .T. ) ;
+#204 = EDGE_CURVE ( 'NONE', #167, #168, #190, .T. ) ;
+#205 = EDGE_CURVE ( 'NONE', #171, #164, #187, .T. ) ;
+#206 = EDGE_CURVE ( 'NONE', #170, #169, #186, .T. ) ;
+#207 = ADVANCED_FACE ( 'NONE', ( #8 ), #101, .F. ) ;
+#208 = ADVANCED_FACE ( 'NONE', ( #25 ), #22, .T. ) ;
+#209 = ADVANCED_FACE ( 'NONE', ( #23 ), #19, .T. ) ;
+#210 = EDGE_CURVE ( 'NONE', #164, #165, #91, .T. ) ;
+#211 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#212 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#213 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #220 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #82, #81, #80 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#214 = MANIFOLD_SOLID_BREP ( 'Revolve1', #11 ) ;
+#215 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #183 ) ;
+#216 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #211, 'design' ) ;
+#217 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'hammer', ( #214, #6 ), #179 ) ;
+#218 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #69, 'distance_accuracy_value', 'NONE');
+#219 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #79, 'distance_accuracy_value', 'NONE');
+#220 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #82, 'distance_accuracy_value', 'NONE');
+ENDSEC;
+END-ISO-10303-21;

Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/impactFuse.step

@@ -0,0 +1,311 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('impactFuse.step',
+    '2014-03-25T03:38:41',
+    ( 'eric' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2012',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = AXIS2_PLACEMENT_3D ( 'NONE', #75, #74, #73 ) ;
+#2 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #12 ), #240 ) ;
+#3 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #12 ) ) ;
+#4 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #177, #176 ) ;
+#5 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #14 ), #242 ) ;
+#6 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #138, #137 ) ;
+#7 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #14 ) ) ;
+#8 = VECTOR ( 'NONE', #101, 1000.000000000000000 ) ;
+#9 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #174, #173 ) ;
+#10 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #99, #98 ) ;
+#11 = AXIS2_PLACEMENT_3D ( 'NONE', #106, #105, #104 ) ;
+#12 = STYLED_ITEM ( 'NONE', ( #79 ), #292 ) ;
+#13 = FACE_BOUND ( 'NONE', #63, .T. ) ;
+#14 = STYLED_ITEM ( 'NONE', ( #92 ), #289 ) ;
+#15 = CYLINDRICAL_SURFACE ( 'NONE', #19, 2.000000000000000000 ) ;
+#16 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #112, #111 ) ;
+#17 = FACE_OUTER_BOUND ( 'NONE', #61, .T. ) ;
+#18 = FACE_OUTER_BOUND ( 'NONE', #60, .T. ) ;
+#19 = AXIS2_PLACEMENT_3D ( 'NONE', #110, #109, #108 ) ;
+#20 = CYLINDRICAL_SURFACE ( 'NONE', #22, 2.000000000000000000 ) ;
+#21 = VECTOR ( 'NONE', #179, 1000.000000000000000 ) ;
+#22 = AXIS2_PLACEMENT_3D ( 'NONE', #117, #116, #115 ) ;
+#23 = FACE_BOUND ( 'NONE', #59, .T. ) ;
+#24 = CYLINDRICAL_SURFACE ( 'NONE', #29, 2.625000000000000000 ) ;
+#25 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #122, #121 ) ;
+#26 = FACE_OUTER_BOUND ( 'NONE', #62, .T. ) ;
+#27 = FACE_OUTER_BOUND ( 'NONE', #67, .T. ) ;
+#28 = FACE_OUTER_BOUND ( 'NONE', #66, .T. ) ;
+#29 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #119, #118 ) ;
+#30 = CYLINDRICAL_SURFACE ( 'NONE', #31, 5.250000000000000000 ) ;
+#31 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #126, #125 ) ;
+#32 = FACE_BOUND ( 'NONE', #65, .T. ) ;
+#33 = CYLINDRICAL_SURFACE ( 'NONE', #34, 5.250000000000000000 ) ;
+#34 = AXIS2_PLACEMENT_3D ( 'NONE', #130, #129, #128 ) ;
+#35 = FACE_OUTER_BOUND ( 'NONE', #64, .T. ) ;
+#36 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #165, #164 ) ;
+#37 = CYLINDRICAL_SURFACE ( 'NONE', #40, 2.625000000000000000 ) ;
+#38 = FACE_OUTER_BOUND ( 'NONE', #68, .T. ) ;
+#39 = CLOSED_SHELL ( 'NONE', ( #274, #275, #279, #280, #281, #282, #276, #277, #278 ) ) ;
+#40 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #132, #131 ) ;
+#41 = FACE_OUTER_BOUND ( 'NONE', #57, .T. ) ;
+#42 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ;
+#43 = VECTOR ( 'NONE', #145, 1000.000000000000000 ) ;
+#44 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #144, #143 ) ;
+#45 = AXIS2_PLACEMENT_3D ( 'NONE', #136, #135, #134 ) ;
+#46 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #150, #149 ) ;
+#47 = VECTOR ( 'NONE', #157, 1000.000000000000000 ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #163, #156, #155 ) ;
+#49 = VECTOR ( 'NONE', #160, 1000.000000000000000 ) ;
+#50 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #141, #140 ) ;
+#51 = AXIS2_PLACEMENT_3D ( 'NONE', #154, #153, #152 ) ;
+#52 = VECTOR ( 'NONE', #169, 1000.000000000000000 ) ;
+#53 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #168, #167 ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #271, .F. ) ;
+#55 = ORIENTED_EDGE ( 'NONE', *, *, #283, .F. ) ;
+#56 = ORIENTED_EDGE ( 'NONE', *, *, #285, .F. ) ;
+#57 = EDGE_LOOP ( 'NONE', ( #69, #213, #212, #214 ) ) ;
+#58 = EDGE_LOOP ( 'NONE', ( #194, #196, #195, #197 ) ) ;
+#59 = EDGE_LOOP ( 'NONE', ( #198, #225 ) ) ;
+#60 = EDGE_LOOP ( 'NONE', ( #226, #228 ) ) ;
+#61 = EDGE_LOOP ( 'NONE', ( #229, #230, #231, #227 ) ) ;
+#62 = EDGE_LOOP ( 'NONE', ( #219, #220 ) ) ;
+#63 = EDGE_LOOP ( 'NONE', ( #222, #221 ) ) ;
+#64 = EDGE_LOOP ( 'NONE', ( #223, #224, #232, #233 ) ) ;
+#65 = EDGE_LOOP ( 'NONE', ( #234, #236 ) ) ;
+#66 = EDGE_LOOP ( 'NONE', ( #237, #54 ) ) ;
+#67 = EDGE_LOOP ( 'NONE', ( #55, #56, #211, #235 ) ) ;
+#68 = EDGE_LOOP ( 'NONE', ( #215, #217, #216, #218 ) ) ;
+#69 = ORIENTED_EDGE ( 'NONE', *, *, #267, .F. ) ;
+#70 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #287 ) ;
+#71 = PRODUCT_CONTEXT ( 'NONE', #286, 'mechanical' ) ;
+#72 = SHAPE_DEFINITION_REPRESENTATION ( #290, #292 ) ;
+#73 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#74 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#75 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#76 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#77 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#78 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#79 = PRESENTATION_STYLE_ASSIGNMENT (( #80 ) ) ;
+#80 = SURFACE_STYLE_USAGE ( .BOTH. , #81 ) ;
+#81 = SURFACE_SIDE_STYLE ('',( #82 ) ) ;
+#82 = SURFACE_STYLE_FILL_AREA ( #83 ) ;
+#83 = FILL_AREA_STYLE ('',( #84 ) ) ;
+#84 = FILL_AREA_STYLE_COLOUR ( '', #245 ) ;
+#85 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #286 ) ;
+#86 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#88 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#89 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#90 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#91 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#92 = PRESENTATION_STYLE_ASSIGNMENT (( #93 ) ) ;
+#93 = SURFACE_STYLE_USAGE ( .BOTH. , #94 ) ;
+#94 = SURFACE_SIDE_STYLE ('',( #95 ) ) ;
+#95 = SURFACE_STYLE_FILL_AREA ( #96 ) ;
+#96 = FILL_AREA_STYLE ('',( #97 ) ) ;
+#97 = FILL_AREA_STYLE_COLOUR ( '', #247 ) ;
+#98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#99 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#100 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 35.94480724856418900, 0.0000000000000000000 ) ) ;
+#101 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#102 = CARTESIAN_POINT ( 'NONE',  ( 3.214697847761802100E-016, 0.0000000000000000000, 2.625000000000000000 ) ) ;
+#103 = LINE ( 'NONE', #102, #8 ) ;
+#104 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#105 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#106 = CARTESIAN_POINT ( 'NONE',  ( 2.000000000000001800, -1.555192751435785500, 0.0000000000000000000 ) ) ;
+#107 = PLANE ( 'NONE',  #11 ) ;
+#108 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#109 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#111 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#112 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( 2.624999999999998700, 0.0000000000000000000, 6.938893903907228400E-015 ) ) ;
+#114 = PLANE ( 'NONE',  #16 ) ;
+#115 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#116 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#117 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#118 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#119 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#121 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#122 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#123 = CARTESIAN_POINT ( 'NONE',  ( 2.624999999999998700, 35.94480724856418900, 6.938893903907228400E-015 ) ) ;
+#124 = PLANE ( 'NONE',  #25 ) ;
+#125 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#126 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#128 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#129 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#130 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#131 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#132 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#134 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#135 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#136 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.555192751435785500, 0.0000000000000000000 ) ) ;
+#137 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#138 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#140 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#141 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#142 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 35.94480724856418900, 0.0000000000000000000 ) ) ;
+#143 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#144 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#145 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#146 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -5.250000000000000000 ) ) ;
+#147 = LINE ( 'NONE', #146, #43 ) ;
+#148 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.555192751435785500, 0.0000000000000000000 ) ) ;
+#149 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#150 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.555192751435785500, 0.0000000000000000000 ) ) ;
+#152 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#153 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 35.94480724856418900, 0.0000000000000000000 ) ) ;
+#155 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#156 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#157 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#158 = CARTESIAN_POINT ( 'NONE',  ( 6.429395695523604200E-016, 0.0000000000000000000, 5.250000000000000000 ) ) ;
+#159 = LINE ( 'NONE', #158, #47 ) ;
+#160 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.625000000000000000 ) ) ;
+#162 = LINE ( 'NONE', #161, #49 ) ;
+#163 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 35.94480724856418900, 0.0000000000000000000 ) ) ;
+#164 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#165 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#168 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#169 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.000000000000000000 ) ) ;
+#171 = LINE ( 'NONE', #170, #52 ) ;
+#172 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#173 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#174 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.555192751435785500, 0.0000000000000000000 ) ) ;
+#176 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#177 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#178 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#179 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#180 = CARTESIAN_POINT ( 'NONE',  ( 2.449293598294706400E-016, 0.0000000000000000000, 2.000000000000000000 ) ) ;
+#181 = LINE ( 'NONE', #180, #21 ) ;
+#182 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.000000000000000000 ) ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( 2.449293598294706400E-016, -1.555192751435785500, 2.000000000000000000 ) ) ;
+#184 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.555192751435785500, -2.000000000000000000 ) ) ;
+#185 = CARTESIAN_POINT ( 'NONE',  ( 2.449293598294706400E-016, 0.0000000000000000000, 2.000000000000000000 ) ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.555192751435785500, -5.250000000000000000 ) ) ;
+#187 = CARTESIAN_POINT ( 'NONE',  ( 6.429395695523604200E-016, -1.555192751435785500, 5.250000000000000000 ) ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 6.429395695523604200E-016, 35.94480724856418900, 5.250000000000000000 ) ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 35.94480724856418900, -5.250000000000000000 ) ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.625000000000000000 ) ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( 3.214697847761802100E-016, 0.0000000000000000000, 2.625000000000000000 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 3.214697847761802100E-016, 35.94480724856418900, 2.625000000000000000 ) ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 35.94480724856418900, -2.625000000000000000 ) ) ;
+#194 = ORIENTED_EDGE ( 'NONE', *, *, #259, .F. ) ;
+#195 = ORIENTED_EDGE ( 'NONE', *, *, #260, .T. ) ;
+#196 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ;
+#197 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ;
+#198 = ORIENTED_EDGE ( 'NONE', *, *, #262, .T. ) ;
+#199 = VERTEX_POINT ( 'NONE', #193 ) ;
+#200 = VERTEX_POINT ( 'NONE', #192 ) ;
+#201 = VERTEX_POINT ( 'NONE', #191 ) ;
+#202 = VERTEX_POINT ( 'NONE', #190 ) ;
+#203 = VERTEX_POINT ( 'NONE', #189 ) ;
+#204 = VERTEX_POINT ( 'NONE', #188 ) ;
+#205 = VERTEX_POINT ( 'NONE', #187 ) ;
+#206 = VERTEX_POINT ( 'NONE', #186 ) ;
+#207 = VERTEX_POINT ( 'NONE', #185 ) ;
+#208 = VERTEX_POINT ( 'NONE', #184 ) ;
+#209 = VERTEX_POINT ( 'NONE', #183 ) ;
+#210 = VERTEX_POINT ( 'NONE', #182 ) ;
+#211 = ORIENTED_EDGE ( 'NONE', *, *, #264, .T. ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #263, .T. ) ;
+#213 = ORIENTED_EDGE ( 'NONE', *, *, #283, .T. ) ;
+#214 = ORIENTED_EDGE ( 'NONE', *, *, #264, .F. ) ;
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #266, .T. ) ;
+#216 = ORIENTED_EDGE ( 'NONE', *, *, #268, .F. ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ;
+#218 = ORIENTED_EDGE ( 'NONE', *, *, #269, .F. ) ;
+#219 = ORIENTED_EDGE ( 'NONE', *, *, #268, .T. ) ;
+#220 = ORIENTED_EDGE ( 'NONE', *, *, #270, .T. ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #260, .F. ) ;
+#222 = ORIENTED_EDGE ( 'NONE', *, *, #273, .F. ) ;
+#223 = ORIENTED_EDGE ( 'NONE', *, *, #265, .F. ) ;
+#224 = ORIENTED_EDGE ( 'NONE', *, *, #271, .T. ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #259, .T. ) ;
+#226 = ORIENTED_EDGE ( 'NONE', *, *, #272, .F. ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #273, .T. ) ;
+#228 = ORIENTED_EDGE ( 'NONE', *, *, #263, .F. ) ;
+#229 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ;
+#230 = ORIENTED_EDGE ( 'NONE', *, *, #262, .F. ) ;
+#231 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ;
+#232 = ORIENTED_EDGE ( 'NONE', *, *, #269, .T. ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #270, .F. ) ;
+#234 = ORIENTED_EDGE ( 'NONE', *, *, #285, .T. ) ;
+#235 = ORIENTED_EDGE ( 'NONE', *, *, #272, .T. ) ;
+#236 = ORIENTED_EDGE ( 'NONE', *, *, #267, .T. ) ;
+#237 = ORIENTED_EDGE ( 'NONE', *, *, #266, .F. ) ;
+#238 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #78, 'distance_accuracy_value', 'NONE');
+#239 = PRODUCT ( 'impactFuse', 'impactFuse', '', ( #71 ) ) ;
+#240 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #238 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #78, #77, #76 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#241 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #293 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #88, #87, #86 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#242 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #294 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #91, #90, #89 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#243 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #239 ) ) ;
+#244 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #288, #291 ) ;
+#245 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#246 = CIRCLE ( 'NONE', #10, 2.625000000000000000 ) ;
+#247 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#248 = CIRCLE ( 'NONE', #45, 2.000000000000000000 ) ;
+#249 = CIRCLE ( 'NONE', #6, 2.625000000000000000 ) ;
+#250 = CIRCLE ( 'NONE', #50, 5.250000000000000000 ) ;
+#251 = CIRCLE ( 'NONE', #44, 5.250000000000000000 ) ;
+#252 = CIRCLE ( 'NONE', #46, 5.250000000000000000 ) ;
+#253 = CIRCLE ( 'NONE', #51, 2.625000000000000000 ) ;
+#254 = CIRCLE ( 'NONE', #53, 2.000000000000000000 ) ;
+#255 = CIRCLE ( 'NONE', #9, 2.000000000000000000 ) ;
+#256 = CIRCLE ( 'NONE', #4, 2.000000000000000000 ) ;
+#257 = CIRCLE ( 'NONE', #36, 2.625000000000000000 ) ;
+#258 = EDGE_CURVE ( 'NONE', #207, #209, #181, .T. ) ;
+#259 = EDGE_CURVE ( 'NONE', #207, #210, #256, .T. ) ;
+#260 = EDGE_CURVE ( 'NONE', #209, #208, #255, .T. ) ;
+#261 = EDGE_CURVE ( 'NONE', #210, #208, #171, .T. ) ;
+#262 = EDGE_CURVE ( 'NONE', #210, #207, #254, .T. ) ;
+#263 = EDGE_CURVE ( 'NONE', #201, #202, #257, .T. ) ;
+#264 = EDGE_CURVE ( 'NONE', #199, #202, #162, .T. ) ;
+#265 = EDGE_CURVE ( 'NONE', #204, #205, #159, .T. ) ;
+#266 = EDGE_CURVE ( 'NONE', #203, #204, #284, .T. ) ;
+#267 = EDGE_CURVE ( 'NONE', #200, #199, #253, .T. ) ;
+#268 = EDGE_CURVE ( 'NONE', #206, #205, #252, .T. ) ;
+#269 = EDGE_CURVE ( 'NONE', #203, #206, #147, .T. ) ;
+#270 = EDGE_CURVE ( 'NONE', #205, #206, #251, .T. ) ;
+#271 = EDGE_CURVE ( 'NONE', #204, #203, #250, .T. ) ;
+#272 = EDGE_CURVE ( 'NONE', #202, #201, #249, .T. ) ;
+#273 = EDGE_CURVE ( 'NONE', #208, #209, #248, .T. ) ;
+#274 = ADVANCED_FACE ( 'NONE', ( #41 ), #37, .F. ) ;
+#275 = ADVANCED_FACE ( 'NONE', ( #38 ), #33, .T. ) ;
+#276 = ADVANCED_FACE ( 'NONE', ( #35 ), #30, .T. ) ;
+#277 = ADVANCED_FACE ( 'NONE', ( #32, #28 ), #124, .T. ) ;
+#278 = ADVANCED_FACE ( 'NONE', ( #27 ), #24, .F. ) ;
+#279 = ADVANCED_FACE ( 'NONE', ( #42 ), #20, .F. ) ;
+#280 = ADVANCED_FACE ( 'NONE', ( #23, #18 ), #114, .T. ) ;
+#281 = ADVANCED_FACE ( 'NONE', ( #17 ), #15, .F. ) ;
+#282 = ADVANCED_FACE ( 'NONE', ( #26, #13 ), #107, .T. ) ;
+#283 = EDGE_CURVE ( 'NONE', #200, #201, #103, .T. ) ;
+#284 = CIRCLE ( 'NONE', #48, 5.250000000000000000 ) ;
+#285 = EDGE_CURVE ( 'NONE', #199, #200, #246, .T. ) ;
+#286 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#287 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#288 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #239, .NOT_KNOWN. ) ;
+#289 = MANIFOLD_SOLID_BREP ( 'Revolve1', #39 ) ;
+#290 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #244 ) ;
+#291 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #287, 'design' ) ;
+#292 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'impactFuse', ( #289, #1 ), #241 ) ;
+#293 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #88, 'distance_accuracy_value', 'NONE');
+#294 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #91, 'distance_accuracy_value', 'NONE');
+ENDSEC;
+END-ISO-10303-21;

Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/nipple.step

@@ -0,0 +1,527 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('nipple.step',
+    '2014-03-25T03:39:06',
+    ( 'eric' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2012',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = VECTOR ( 'NONE', #153, 1000.000000000000000 ) ;
+#2 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #148, #147 ) ;
+#3 = FACE_OUTER_BOUND ( 'NONE', #379, .T. ) ;
+#4 = FACE_OUTER_BOUND ( 'NONE', #376, .T. ) ;
+#5 = FACE_BOUND ( 'NONE', #386, .T. ) ;
+#6 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #141, #140 ) ;
+#7 = FACE_OUTER_BOUND ( 'NONE', #373, .T. ) ;
+#8 = VECTOR ( 'NONE', #234, 1000.000000000000000 ) ;
+#9 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #216, #213 ) ;
+#10 = AXIS2_PLACEMENT_3D ( 'NONE', #245, #244, #243 ) ;
+#11 = FACE_OUTER_BOUND ( 'NONE', #370, .T. ) ;
+#12 = FACE_OUTER_BOUND ( 'NONE', #372, .T. ) ;
+#13 = VECTOR ( 'NONE', #162, 1000.000000000000000 ) ;
+#14 = CYLINDRICAL_SURFACE ( 'NONE', #6, 0.5080000000000000100 ) ;
+#15 = VECTOR ( 'NONE', #165, 1000.000000000000000 ) ;
+#16 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #161, #160 ) ;
+#17 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #158, #157 ) ;
+#18 = VECTOR ( 'NONE', #174, 1000.000000000000000 ) ;
+#19 = AXIS2_PLACEMENT_3D ( 'NONE', #248, #247, #246 ) ;
+#20 = AXIS2_PLACEMENT_3D ( 'NONE', #180, #173, #172 ) ;
+#21 = VECTOR ( 'NONE', #177, 1000.000000000000000 ) ;
+#22 = FACE_BOUND ( 'NONE', #368, .T. ) ;
+#23 = AXIS2_PLACEMENT_3D ( 'NONE', #171, #170, #169 ) ;
+#24 = CLOSED_SHELL ( 'NONE', ( #429, #426, #427, #428, #468, #467, #469, #425, #470, #398, #397, #460, #458, #459, #445, #446 ) ) ;
+#25 = AXIS2_PLACEMENT_3D ( 'NONE', #186, #185, #184 ) ;
+#26 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #152, #151 ) ;
+#27 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #189, #188 ) ;
+#28 = VECTOR ( 'NONE', #191, 1000.000000000000000 ) ;
+#29 = FACE_OUTER_BOUND ( 'NONE', #375, .T. ) ;
+#30 = VECTOR ( 'NONE', #194, 1000.000000000000000 ) ;
+#31 = AXIS2_PLACEMENT_3D ( 'NONE', #183, #182, #181 ) ;
+#32 = VECTOR ( 'NONE', #197, 1000.000000000000000 ) ;
+#33 = FACE_OUTER_BOUND ( 'NONE', #378, .T. ) ;
+#34 = VECTOR ( 'NONE', #222, 1000.000000000000000 ) ;
+#35 = AXIS2_PLACEMENT_3D ( 'NONE', #60, #59, #58 ) ;
+#36 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #65, #64 ) ;
+#37 = FACE_OUTER_BOUND ( 'NONE', #384, .T. ) ;
+#38 = VECTOR ( 'NONE', #69, 1000.000000000000000 ) ;
+#39 = AXIS2_PLACEMENT_3D ( 'NONE', #241, #242, #237 ) ;
+#40 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #68, #67 ) ;
+#41 = VECTOR ( 'NONE', #72, 1000.000000000000000 ) ;
+#42 = AXIS2_PLACEMENT_3D ( 'NONE', #63, #62, #61 ) ;
+#43 = VECTOR ( 'NONE', #205, 1000.000000000000000 ) ;
+#44 = AXIS2_PLACEMENT_3D ( 'NONE', #208, #204, #203 ) ;
+#45 = VECTOR ( 'NONE', #211, 1000.000000000000000 ) ;
+#46 = AXIS2_PLACEMENT_3D ( 'NONE', #214, #212, #207 ) ;
+#47 = CYLINDRICAL_SURFACE ( 'NONE', #48, 0.5080000000000000100 ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #220, #219, #218 ) ;
+#49 = FACE_OUTER_BOUND ( 'NONE', #374, .T. ) ;
+#50 = CYLINDRICAL_SURFACE ( 'NONE', #51, 2.625000000000000000 ) ;
+#51 = AXIS2_PLACEMENT_3D ( 'NONE', #227, #223, #221 ) ;
+#52 = FACE_OUTER_BOUND ( 'NONE', #377, .T. ) ;
+#53 = FACE_OUTER_BOUND ( 'NONE', #369, .T. ) ;
+#54 = CYLINDRICAL_SURFACE ( 'NONE', #55, 3.987800000000001300 ) ;
+#55 = AXIS2_PLACEMENT_3D ( 'NONE', #230, #225, #226 ) ;
+#56 = AXIS2_PLACEMENT_3D ( 'NONE', #233, #228, #229 ) ;
+#57 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #231, #232 ) ;
+#58 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#59 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#60 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ;
+#61 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589387300E-019, 0.0000000000000000000 ) ) ;
+#62 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#64 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#65 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#67 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#68 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#69 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 6.259272319258516500E-034, -1.000000000000000000 ) ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999970400, 6.714999999999971400, -3.700344148226945700 ) ) ;
+#71 = LINE ( 'NONE', #70, #38 ) ;
+#72 = DIRECTION ( 'NONE',  ( 2.775557561562891400E-016, -1.131483842327501100E-033, 1.000000000000000000 ) ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000032600, 6.714999999999971400, -3.690079670700660700 ) ) ;
+#74 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #477 ) ;
+#75 = PRODUCT_CONTEXT ( 'NONE', #476, 'mechanical' ) ;
+#76 = SHAPE_DEFINITION_REPRESENTATION ( #509, #391 ) ;
+#77 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#78 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#79 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#80 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#81 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#82 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#83 = PRESENTATION_STYLE_ASSIGNMENT (( #84 ) ) ;
+#84 = SURFACE_STYLE_USAGE ( .BOTH. , #85 ) ;
+#85 = SURFACE_SIDE_STYLE ('',( #86 ) ) ;
+#86 = SURFACE_STYLE_FILL_AREA ( #87 ) ;
+#87 = FILL_AREA_STYLE ('',( #88 ) ) ;
+#88 = FILL_AREA_STYLE_COLOUR ( '', #402 ) ;
+#89 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #476 ) ;
+#90 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#91 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#92 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#93 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#94 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#95 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#96 = PRESENTATION_STYLE_ASSIGNMENT (( #97 ) ) ;
+#97 = SURFACE_STYLE_USAGE ( .BOTH. , #98 ) ;
+#98 = SURFACE_SIDE_STYLE ('',( #99 ) ) ;
+#99 = SURFACE_STYLE_FILL_AREA ( #100 ) ;
+#100 = FILL_AREA_STYLE ('',( #101 ) ) ;
+#101 = FILL_AREA_STYLE_COLOUR ( '', #403 ) ;
+#102 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#103 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#104 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#105 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#106 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#107 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ;
+#108 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#109 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#111 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#112 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#114 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#115 = DIRECTION ( 'NONE',  ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#117 = PLANE ( 'NONE',  #505 ) ;
+#118 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#119 = DIRECTION ( 'NONE',  ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#121 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 6.259272319258516500E-034, -1.000000000000000000 ) ) ;
+#122 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999997900, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#123 = LINE ( 'NONE', #122, #482 ) ;
+#124 = PLANE ( 'NONE',  #507 ) ;
+#125 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#126 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#128 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#129 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#130 = DIRECTION ( 'NONE',  ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999959800, 13.79219999999997600, -3.285153950730507000 ) ) ;
+#132 = LINE ( 'NONE', #131, #485 ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ;
+#134 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589387300E-019, 0.0000000000000000000 ) ) ;
+#135 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#136 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#137 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#138 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#140 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#141 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#142 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#143 = DIRECTION ( 'NONE',  ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ;
+#144 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589380100E-019, -4.451047380824905700E-067 ) ) ;
+#145 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999970400, -2.270623786609860000, -3.700344148226945700 ) ) ;
+#146 = PLANE ( 'NONE',  #480 ) ;
+#147 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#148 = DIRECTION ( 'NONE',  ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ;
+#150 = PLANE ( 'NONE',  #2 ) ;
+#151 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#152 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#153 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000001500, 13.79219999999997600, -3.285153950730465700 ) ) ;
+#155 = LINE ( 'NONE', #154, #1 ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#157 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#158 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#159 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ;
+#160 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#161 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#162 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#163 = CARTESIAN_POINT ( 'NONE',  ( 3.987800000000001300, 13.79219999999997600, 4.883646505639816700E-016 ) ) ;
+#164 = LINE ( 'NONE', #163, #13 ) ;
+#165 = DIRECTION ( 'NONE',  ( 0.02330972700157234900, -0.9997282914007746800, 7.220274947474401100E-034 ) ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( 2.197099999999999800, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#167 = LINE ( 'NONE', #166, #15 ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ;
+#169 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#170 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#171 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#172 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#173 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#174 = DIRECTION ( 'NONE',  ( -0.02330972700157234900, -0.9997282914007746800, 2.854618256147421400E-018 ) ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( -2.197099999999999800, 8.890000000000009500, 2.690671482406649800E-016 ) ) ;
+#176 = LINE ( 'NONE', #175, #18 ) ;
+#177 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#178 = CARTESIAN_POINT ( 'NONE',  ( -0.5080000000000000100, -1.718565121455408300E-019, 0.0000000000000000000 ) ) ;
+#179 = LINE ( 'NONE', #178, #21 ) ;
+#180 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#181 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#182 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#184 = DIRECTION ( 'NONE',  ( -2.775557561562891400E-016, 1.227780339546862900E-033, -1.000000000000000000 ) ) ;
+#185 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 3.383002207589399300E-019, -2.775557561562891400E-016 ) ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000032600, -2.270623786609860000, -3.690079670700660700 ) ) ;
+#187 = PLANE ( 'NONE',  #25 ) ;
+#188 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#189 = DIRECTION ( 'NONE',  ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ;
+#191 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999970400, 13.79219999999997600, 3.285153950730423900 ) ) ;
+#193 = LINE ( 'NONE', #192, #28 ) ;
+#194 = DIRECTION ( 'NONE',  ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000049900, 13.79219999999997600, 3.285153950730431000 ) ) ;
+#196 = LINE ( 'NONE', #195, #30 ) ;
+#197 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#198 = LINE ( 'NONE', #73, #41 ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( -3.987800000000001300, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#201 = PLANE ( 'NONE',  #27 ) ;
+#202 = CARTESIAN_POINT ( 'NONE',  ( 2.625000000000000000, 13.79219999999997600, 3.214697847761802100E-016 ) ) ;
+#203 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#204 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#205 = DIRECTION ( 'NONE',  ( 2.775557561562891400E-016, -1.131483842327501100E-033, 1.000000000000000000 ) ) ;
+#206 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000043200, 8.890000000000009500, -5.551115123125782700E-014 ) ) ;
+#207 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#208 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#209 = LINE ( 'NONE', #206, #43 ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( -2.625000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#211 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#212 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#213 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#214 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#215 = LINE ( 'NONE', #210, #45 ) ;
+#216 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#217 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ;
+#218 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#219 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#220 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#221 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#222 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#223 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#224 = LINE ( 'NONE', #202, #32 ) ;
+#225 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#226 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#227 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#228 = DIRECTION ( 'NONE',  ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ;
+#229 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#230 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#231 = DIRECTION ( 'NONE',  ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#232 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#233 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#234 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#235 = PLANE ( 'NONE',  #57 ) ;
+#236 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ;
+#237 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 3.383002207589386300E-019, 0.0000000000000000000 ) ) ;
+#238 = LINE ( 'NONE', #239, #8 ) ;
+#239 = CARTESIAN_POINT ( 'NONE',  ( 0.5080000000000000100, 1.718565121455408300E-019, 6.221205739668554100E-017 ) ) ;
+#240 = PLANE ( 'NONE',  #39 ) ;
+#241 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#242 = DIRECTION ( 'NONE',  ( 3.383002207589386300E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ;
+#243 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#244 = DIRECTION ( 'NONE',  ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ;
+#245 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ;
+#246 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#247 = DIRECTION ( 'NONE',  ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ;
+#248 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ;
+#249 = LINE ( 'NONE', #200, #34 ) ;
+#250 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999959800, 6.715000000000026500, -3.285153950730507000 ) ) ;
+#251 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999959800, 8.890000000000009500, -3.285153950730507000 ) ) ;
+#252 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000001500, 8.890000000000009500, -3.285153950730465700 ) ) ;
+#253 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000001500, 6.715000000000026500, -3.285153950730465700 ) ) ;
+#254 = CARTESIAN_POINT ( 'NONE',  ( 2.625000000000000000, 8.880380794922126000E-019, 3.214697847761802100E-016 ) ) ;
+#255 = CARTESIAN_POINT ( 'NONE',  ( -2.082800000000000700, 13.79219999999997600, 2.620682917835379400E-016 ) ) ;
+#256 = CARTESIAN_POINT ( 'NONE',  ( -3.987800000000001300, 6.715000000000026500, 4.687015335033693100E-033 ) ) ;
+#257 = CARTESIAN_POINT ( 'NONE',  ( -2.625000000000000000, -8.880380794922141400E-019, 0.0000000000000000000 ) ) ;
+#258 = CARTESIAN_POINT ( 'NONE',  ( 2.625000000000000000, 5.715000000000025600, 3.214697847761802100E-016 ) ) ;
+#259 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000049900, 8.890000000000009500, 3.285153950730431000 ) ) ;
+#260 = CARTESIAN_POINT ( 'NONE',  ( -0.5080000000000000100, 13.79219999999997600, 0.0000000000000000000 ) ) ;
+#261 = CARTESIAN_POINT ( 'NONE',  ( 0.5080000000000000100, 13.79219999999997600, 6.221205739668554100E-017 ) ) ;
+#262 = CARTESIAN_POINT ( 'NONE',  ( -0.5080000000000000100, -1.718565121455408300E-019, 0.0000000000000000000 ) ) ;
+#263 = CARTESIAN_POINT ( 'NONE',  ( 0.5080000000000000100, 1.718565121455405000E-019, 6.221205739668554100E-017 ) ) ;
+#264 = CARTESIAN_POINT ( 'NONE',  ( 3.987800000000000500, 5.715000000000025600, 4.883646505639815700E-016 ) ) ;
+#265 = CARTESIAN_POINT ( 'NONE',  ( 2.082800000000000700, 13.79219999999997600, -1.770242582507833700E-033 ) ) ;
+#266 = CARTESIAN_POINT ( 'NONE',  ( -2.197099999999999800, 8.890000000000009500, 2.690671482406649800E-016 ) ) ;
+#267 = CARTESIAN_POINT ( 'NONE',  ( -3.987800000000000500, 5.715000000000025600, 0.0000000000000000000 ) ) ;
+#268 = CARTESIAN_POINT ( 'NONE',  ( 3.987800000000001300, 6.715000000000026500, 4.883646505639816700E-016 ) ) ;
+#269 = CARTESIAN_POINT ( 'NONE',  ( 2.197099999999999800, 8.890000000000009500, -5.368140309194513200E-052 ) ) ;
+#270 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999970400, 6.715000000000026500, 3.285153950730423900 ) ) ;
+#271 = CARTESIAN_POINT ( 'NONE',  ( 2.260599999999970400, 8.890000000000009500, 3.285153950730423900 ) ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( -2.625000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ;
+#273 = CARTESIAN_POINT ( 'NONE',  ( -2.260600000000049900, 6.715000000000026500, 3.285153950730431000 ) ) ;
+#274 = ORIENTED_EDGE ( 'NONE', *, *, #430, .F. ) ;
+#275 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ;
+#276 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ;
+#277 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ;
+#278 = ORIENTED_EDGE ( 'NONE', *, *, #434, .T. ) ;
+#279 = ORIENTED_EDGE ( 'NONE', *, *, #447, .F. ) ;
+#280 = VERTEX_POINT ( 'NONE', #273 ) ;
+#281 = VERTEX_POINT ( 'NONE', #272 ) ;
+#282 = VERTEX_POINT ( 'NONE', #271 ) ;
+#283 = VERTEX_POINT ( 'NONE', #270 ) ;
+#284 = VERTEX_POINT ( 'NONE', #269 ) ;
+#285 = VERTEX_POINT ( 'NONE', #268 ) ;
+#286 = VERTEX_POINT ( 'NONE', #267 ) ;
+#287 = VERTEX_POINT ( 'NONE', #266 ) ;
+#288 = VERTEX_POINT ( 'NONE', #265 ) ;
+#289 = VERTEX_POINT ( 'NONE', #264 ) ;
+#290 = VERTEX_POINT ( 'NONE', #263 ) ;
+#291 = VERTEX_POINT ( 'NONE', #262 ) ;
+#292 = VERTEX_POINT ( 'NONE', #261 ) ;
+#293 = VERTEX_POINT ( 'NONE', #260 ) ;
+#294 = VERTEX_POINT ( 'NONE', #259 ) ;
+#295 = VERTEX_POINT ( 'NONE', #258 ) ;
+#296 = VERTEX_POINT ( 'NONE', #257 ) ;
+#297 = VERTEX_POINT ( 'NONE', #256 ) ;
+#298 = VERTEX_POINT ( 'NONE', #255 ) ;
+#299 = VERTEX_POINT ( 'NONE', #254 ) ;
+#300 = VERTEX_POINT ( 'NONE', #253 ) ;
+#301 = VERTEX_POINT ( 'NONE', #252 ) ;
+#302 = VERTEX_POINT ( 'NONE', #251 ) ;
+#303 = VERTEX_POINT ( 'NONE', #250 ) ;
+#304 = ORIENTED_EDGE ( 'NONE', *, *, #433, .F. ) ;
+#305 = ORIENTED_EDGE ( 'NONE', *, *, #443, .F. ) ;
+#306 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ;
+#307 = ORIENTED_EDGE ( 'NONE', *, *, #456, .F. ) ;
+#308 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ;
+#309 = ORIENTED_EDGE ( 'NONE', *, *, #440, .T. ) ;
+#310 = ORIENTED_EDGE ( 'NONE', *, *, #455, .T. ) ;
+#311 = ORIENTED_EDGE ( 'NONE', *, *, #466, .F. ) ;
+#312 = ORIENTED_EDGE ( 'NONE', *, *, #463, .F. ) ;
+#313 = ORIENTED_EDGE ( 'NONE', *, *, #436, .T. ) ;
+#314 = ORIENTED_EDGE ( 'NONE', *, *, #444, .F. ) ;
+#315 = ORIENTED_EDGE ( 'NONE', *, *, #436, .F. ) ;
+#316 = ORIENTED_EDGE ( 'NONE', *, *, #464, .T. ) ;
+#317 = ORIENTED_EDGE ( 'NONE', *, *, #437, .T. ) ;
+#318 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ;
+#319 = ORIENTED_EDGE ( 'NONE', *, *, #461, .F. ) ;
+#320 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ;
+#321 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ;
+#322 = ORIENTED_EDGE ( 'NONE', *, *, #452, .T. ) ;
+#323 = ORIENTED_EDGE ( 'NONE', *, *, #434, .F. ) ;
+#324 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ;
+#325 = ORIENTED_EDGE ( 'NONE', *, *, #465, .T. ) ;
+#326 = ORIENTED_EDGE ( 'NONE', *, *, #466, .T. ) ;
+#327 = ORIENTED_EDGE ( 'NONE', *, *, #438, .T. ) ;
+#328 = ORIENTED_EDGE ( 'NONE', *, *, #451, .F. ) ;
+#329 = ORIENTED_EDGE ( 'NONE', *, *, #443, .T. ) ;
+#330 = ORIENTED_EDGE ( 'NONE', *, *, #440, .F. ) ;
+#331 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ;
+#332 = ORIENTED_EDGE ( 'NONE', *, *, #438, .F. ) ;
+#333 = ORIENTED_EDGE ( 'NONE', *, *, #439, .T. ) ;
+#334 = ORIENTED_EDGE ( 'NONE', *, *, #450, .F. ) ;
+#335 = ORIENTED_EDGE ( 'NONE', *, *, #451, .T. ) ;
+#336 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ;
+#337 = ORIENTED_EDGE ( 'NONE', *, *, #452, .F. ) ;
+#338 = ORIENTED_EDGE ( 'NONE', *, *, #454, .T. ) ;
+#339 = ORIENTED_EDGE ( 'NONE', *, *, #437, .F. ) ;
+#340 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ;
+#341 = ORIENTED_EDGE ( 'NONE', *, *, #444, .T. ) ;
+#342 = ORIENTED_EDGE ( 'NONE', *, *, #453, .T. ) ;
+#343 = ORIENTED_EDGE ( 'NONE', *, *, #471, .T. ) ;
+#344 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ;
+#345 = ORIENTED_EDGE ( 'NONE', *, *, #457, .F. ) ;
+#346 = ORIENTED_EDGE ( 'NONE', *, *, #456, .T. ) ;
+#347 = ORIENTED_EDGE ( 'NONE', *, *, #463, .T. ) ;
+#348 = ORIENTED_EDGE ( 'NONE', *, *, #464, .F. ) ;
+#349 = ORIENTED_EDGE ( 'NONE', *, *, #439, .F. ) ;
+#350 = ORIENTED_EDGE ( 'NONE', *, *, #450, .T. ) ;
+#351 = ORIENTED_EDGE ( 'NONE', *, *, #461, .T. ) ;
+#352 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ;
+#353 = ORIENTED_EDGE ( 'NONE', *, *, #472, .T. ) ;
+#354 = ORIENTED_EDGE ( 'NONE', *, *, #462, .F. ) ;
+#355 = ORIENTED_EDGE ( 'NONE', *, *, #396, .F. ) ;
+#356 = ORIENTED_EDGE ( 'NONE', *, *, #462, .T. ) ;
+#357 = ORIENTED_EDGE ( 'NONE', *, *, #465, .F. ) ;
+#358 = ORIENTED_EDGE ( 'NONE', *, *, #457, .T. ) ;
+#359 = ORIENTED_EDGE ( 'NONE', *, *, #433, .T. ) ;
+#360 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ;
+#361 = ORIENTED_EDGE ( 'NONE', *, *, #455, .F. ) ;
+#362 = ORIENTED_EDGE ( 'NONE', *, *, #454, .F. ) ;
+#363 = ORIENTED_EDGE ( 'NONE', *, *, #471, .F. ) ;
+#364 = ORIENTED_EDGE ( 'NONE', *, *, #396, .T. ) ;
+#365 = ORIENTED_EDGE ( 'NONE', *, *, #430, .T. ) ;
+#366 = ORIENTED_EDGE ( 'NONE', *, *, #453, .F. ) ;
+#367 = EDGE_LOOP ( 'NONE', ( #349, #354 ) ) ;
+#368 = EDGE_LOOP ( 'NONE', ( #357, #328 ) ) ;
+#369 = EDGE_LOOP ( 'NONE', ( #358, #359, #327, #326 ) ) ;
+#370 = EDGE_LOOP ( 'NONE', ( #324, #323, #322, #325 ) ) ;
+#371 = EDGE_LOOP ( 'NONE', ( #320, #319, #318, #321 ) ) ;
+#372 = EDGE_LOOP ( 'NONE', ( #317, #316, #315 ) ) ;
+#373 = EDGE_LOOP ( 'NONE', ( #313, #312, #311, #314 ) ) ;
+#374 = EDGE_LOOP ( 'NONE', ( #310, #309, #308 ) ) ;
+#375 = EDGE_LOOP ( 'NONE', ( #306, #305, #304, #307 ) ) ;
+#376 = EDGE_LOOP ( 'NONE', ( #334, #336, #335, #337 ) ) ;
+#377 = EDGE_LOOP ( 'NONE', ( #387, #389, #388, #340 ) ) ;
+#378 = EDGE_LOOP ( 'NONE', ( #338, #342, #339, #341, #332, #329, #330, #331 ) ) ;
+#379 = EDGE_LOOP ( 'NONE', ( #333, #275, #274, #276 ) ) ;
+#380 = EDGE_LOOP ( 'NONE', ( #278, #350 ) ) ;
+#381 = EDGE_LOOP ( 'NONE', ( #351, #353 ) ) ;
+#382 = EDGE_LOOP ( 'NONE', ( #277, #279 ) ) ;
+#383 = EDGE_LOOP ( 'NONE', ( #352, #356, #360, #355 ) ) ;
+#384 = EDGE_LOOP ( 'NONE', ( #362, #363 ) ) ;
+#385 = EDGE_LOOP ( 'NONE', ( #366, #343, #344, #361, #346, #345, #347, #348 ) ) ;
+#386 = EDGE_LOOP ( 'NONE', ( #365, #364 ) ) ;
+#387 = ORIENTED_EDGE ( 'NONE', *, *, #472, .F. ) ;
+#388 = ORIENTED_EDGE ( 'NONE', *, *, #447, .T. ) ;
+#389 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ;
+#390 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #92, 'distance_accuracy_value', 'NONE');
+#391 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'nipple', ( #510, #490 ), #474 ) ;
+#392 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #82, 'distance_accuracy_value', 'NONE');
+#393 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #95, 'distance_accuracy_value', 'NONE');
+#394 = PRODUCT ( 'nipple', 'nipple', '', ( #75 ) ) ;
+#395 = CONICAL_SURFACE ( 'NONE', #10, 2.197099999999999800, 0.02331183838213687200 ) ;
+#396 = EDGE_CURVE ( 'NONE', #295, #281, #424, .T. ) ;
+#397 = ADVANCED_FACE ( 'NONE', ( #11 ), #395, .T. ) ;
+#398 = ADVANCED_FACE ( 'NONE', ( #22, #53 ), #240, .F. ) ;
+#399 = EDGE_CURVE ( 'NONE', #290, #292, #238, .T. ) ;
+#400 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #394 ) ) ;
+#401 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #488, #508 ) ;
+#402 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#403 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#404 = CIRCLE ( 'NONE', #503, 0.5080000000000000100 ) ;
+#405 = CIRCLE ( 'NONE', #479, 3.987800000000000500 ) ;
+#406 = CIRCLE ( 'NONE', #506, 2.197099999999999800 ) ;
+#407 = CIRCLE ( 'NONE', #484, 3.987800000000001300 ) ;
+#408 = CIRCLE ( 'NONE', #486, 0.5080000000000000100 ) ;
+#409 = CIRCLE ( 'NONE', #495, 2.625000000000000000 ) ;
+#410 = CIRCLE ( 'NONE', #26, 3.987800000000001300 ) ;
+#411 = CIRCLE ( 'NONE', #17, 3.987800000000001300 ) ;
+#412 = CIRCLE ( 'NONE', #16, 3.987800000000000500 ) ;
+#413 = CIRCLE ( 'NONE', #23, 2.197099999999999800 ) ;
+#414 = CIRCLE ( 'NONE', #20, 2.082800000000000700 ) ;
+#415 = CIRCLE ( 'NONE', #31, 0.5080000000000000100 ) ;
+#416 = CIRCLE ( 'NONE', #35, 3.987800000000001300 ) ;
+#417 = CIRCLE ( 'NONE', #42, 2.625000000000000000 ) ;
+#418 = CIRCLE ( 'NONE', #36, 3.987800000000001300 ) ;
+#419 = CIRCLE ( 'NONE', #40, 3.987800000000001300 ) ;
+#420 = CIRCLE ( 'NONE', #44, 2.082800000000000700 ) ;
+#421 = CIRCLE ( 'NONE', #9, 2.625000000000000000 ) ;
+#422 = CIRCLE ( 'NONE', #46, 0.5080000000000000100 ) ;
+#423 = CONICAL_SURFACE ( 'NONE', #56, 2.197099999999999800, 0.02331183838213687200 ) ;
+#424 = CIRCLE ( 'NONE', #19, 2.625000000000000000 ) ;
+#425 = ADVANCED_FACE ( 'NONE', ( #37, #5 ), #235, .F. ) ;
+#426 = ADVANCED_FACE ( 'NONE', ( #4 ), #423, .T. ) ;
+#427 = ADVANCED_FACE ( 'NONE', ( #33 ), #54, .T. ) ;
+#428 = ADVANCED_FACE ( 'NONE', ( #3 ), #50, .T. ) ;
+#429 = ADVANCED_FACE ( 'NONE', ( #52 ), #47, .F. ) ;
+#430 = EDGE_CURVE ( 'NONE', #281, #295, #421, .T. ) ;
+#431 = EDGE_CURVE ( 'NONE', #296, #281, #215, .T. ) ;
+#432 = EDGE_CURVE ( 'NONE', #293, #292, #422, .T. ) ;
+#433 = EDGE_CURVE ( 'NONE', #301, #294, #209, .T. ) ;
+#434 = EDGE_CURVE ( 'NONE', #288, #298, #420, .T. ) ;
+#435 = EDGE_CURVE ( 'NONE', #300, #280, #198, .T. ) ;
+#436 = EDGE_CURVE ( 'NONE', #283, #303, #71, .T. ) ;
+#437 = EDGE_CURVE ( 'NONE', #283, #285, #419, .T. ) ;
+#438 = EDGE_CURVE ( 'NONE', #294, #282, #418, .T. ) ;
+#439 = EDGE_CURVE ( 'NONE', #296, #299, #417, .T. ) ;
+#440 = EDGE_CURVE ( 'NONE', #297, #280, #416, .T. ) ;
+#441 = EDGE_CURVE ( 'NONE', #286, #297, #249, .T. ) ;
+#442 = EDGE_CURVE ( 'NONE', #299, #295, #224, .T. ) ;
+#443 = EDGE_CURVE ( 'NONE', #294, #280, #196, .T. ) ;
+#444 = EDGE_CURVE ( 'NONE', #283, #282, #193, .T. ) ;
+#445 = ADVANCED_FACE ( 'NONE', ( #49 ), #201, .T. ) ;
+#446 = ADVANCED_FACE ( 'NONE', ( #29 ), #187, .F. ) ;
+#447 = EDGE_CURVE ( 'NONE', #292, #293, #415, .T. ) ;
+#448 = EDGE_CURVE ( 'NONE', #291, #293, #179, .T. ) ;
+#449 = EDGE_CURVE ( 'NONE', #298, #287, #176, .T. ) ;
+#450 = EDGE_CURVE ( 'NONE', #298, #288, #414, .T. ) ;
+#451 = EDGE_CURVE ( 'NONE', #287, #284, #413, .T. ) ;
+#452 = EDGE_CURVE ( 'NONE', #288, #284, #167, .T. ) ;
+#453 = EDGE_CURVE ( 'NONE', #289, #285, #164, .T. ) ;
+#454 = EDGE_CURVE ( 'NONE', #286, #289, #412, .T. ) ;
+#455 = EDGE_CURVE ( 'NONE', #300, #297, #411, .T. ) ;
+#456 = EDGE_CURVE ( 'NONE', #300, #301, #155, .T. ) ;
+#457 = EDGE_CURVE ( 'NONE', #302, #301, #410, .T. ) ;
+#458 = ADVANCED_FACE ( 'NONE', ( #12 ), #150, .T. ) ;
+#459 = ADVANCED_FACE ( 'NONE', ( #7 ), #146, .F. ) ;
+#460 = ADVANCED_FACE ( 'NONE', ( #493 ), #14, .F. ) ;
+#461 = EDGE_CURVE ( 'NONE', #291, #290, #408, .T. ) ;
+#462 = EDGE_CURVE ( 'NONE', #299, #296, #409, .T. ) ;
+#463 = EDGE_CURVE ( 'NONE', #302, #303, #132, .T. ) ;
+#464 = EDGE_CURVE ( 'NONE', #285, #303, #407, .T. ) ;
+#465 = EDGE_CURVE ( 'NONE', #284, #287, #406, .T. ) ;
+#466 = EDGE_CURVE ( 'NONE', #282, #302, #123, .T. ) ;
+#467 = ADVANCED_FACE ( 'NONE', ( #478, #498 ), #124, .F. ) ;
+#468 = ADVANCED_FACE ( 'NONE', ( #481, #483 ), #117, .T. ) ;
+#469 = ADVANCED_FACE ( 'NONE', ( #494 ), #504, .T. ) ;
+#470 = ADVANCED_FACE ( 'NONE', ( #487 ), #501, .T. ) ;
+#471 = EDGE_CURVE ( 'NONE', #289, #286, #405, .T. ) ;
+#472 = EDGE_CURVE ( 'NONE', #290, #291, #404, .T. ) ;
+#473 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #393 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #95, #94, #93 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#474 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #390 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #92, #91, #90 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#475 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #392 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #82, #81, #80 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#476 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#477 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#478 = FACE_BOUND ( 'NONE', #381, .T. ) ;
+#479 = AXIS2_PLACEMENT_3D ( 'NONE', #107, #106, #105 ) ;
+#480 = AXIS2_PLACEMENT_3D ( 'NONE', #145, #144, #143 ) ;
+#481 = FACE_BOUND ( 'NONE', #382, .T. ) ;
+#482 = VECTOR ( 'NONE', #121, 1000.000000000000000 ) ;
+#483 = FACE_OUTER_BOUND ( 'NONE', #380, .T. ) ;
+#484 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #129, #128 ) ;
+#485 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ;
+#486 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #138, #137 ) ;
+#487 = FACE_OUTER_BOUND ( 'NONE', #385, .T. ) ;
+#488 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #394, .NOT_KNOWN. ) ;
+#489 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #112, #111 ) ;
+#490 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #78, #77 ) ;
+#491 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #500 ), #475 ) ;
+#492 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #500 ) ) ;
+#493 = FACE_OUTER_BOUND ( 'NONE', #371, .T. ) ;
+#494 = FACE_OUTER_BOUND ( 'NONE', #383, .T. ) ;
+#495 = AXIS2_PLACEMENT_3D ( 'NONE', #136, #135, #134 ) ;
+#496 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #499 ), #473 ) ;
+#497 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #499 ) ) ;
+#498 = FACE_OUTER_BOUND ( 'NONE', #367, .T. ) ;
+#499 = STYLED_ITEM ( 'NONE', ( #96 ), #510 ) ;
+#500 = STYLED_ITEM ( 'NONE', ( #83 ), #391 ) ;
+#501 = CYLINDRICAL_SURFACE ( 'NONE', #502, 3.987800000000001300 ) ;
+#502 = AXIS2_PLACEMENT_3D ( 'NONE', #110, #109, #108 ) ;
+#503 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #103, #102 ) ;
+#504 = CYLINDRICAL_SURFACE ( 'NONE', #489, 2.625000000000000000 ) ;
+#505 = AXIS2_PLACEMENT_3D ( 'NONE', #116, #115, #114 ) ;
+#506 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #126, #125 ) ;
+#507 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #119, #118 ) ;
+#508 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #477, 'design' ) ;
+#509 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #401 ) ;
+#510 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude2', #24 ) ;
+ENDSEC;
+END-ISO-10303-21;

Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/nose.step

@@ -0,0 +1,333 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('nose.step',
+    '2014-03-25T03:40:27',
+    ( 'eric' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2012',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #4 ), #54 ) ;
+#2 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #4 ) ) ;
+#3 = VECTOR ( 'NONE', #140, 1000.000000000000000 ) ;
+#4 = STYLED_ITEM ( 'NONE', ( #110 ), #312 ) ;
+#5 = AXIS2_PLACEMENT_3D ( 'NONE', #121, #120, #119 ) ;
+#6 = AXIS2_PLACEMENT_3D ( 'NONE', #118, #117, #116 ) ;
+#7 = AXIS2_PLACEMENT_3D ( 'NONE', #186, #185, #184 ) ;
+#8 = AXIS2_PLACEMENT_3D ( 'NONE', #124, #123, #122 ) ;
+#9 = STYLED_ITEM ( 'NONE', ( #97 ), #314 ) ;
+#10 = FACE_OUTER_BOUND ( 'NONE', #231, .T. ) ;
+#11 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #146, #145 ) ;
+#12 = VECTOR ( 'NONE', #137, 1000.000000000000000 ) ;
+#13 = AXIS2_PLACEMENT_3D ( 'NONE', #144, #133, #132 ) ;
+#14 = VECTOR ( 'NONE', #150, 1000.000000000000000 ) ;
+#15 = FACE_BOUND ( 'NONE', #230, .T. ) ;
+#16 = FACE_OUTER_BOUND ( 'NONE', #229, .T. ) ;
+#17 = FACE_OUTER_BOUND ( 'NONE', #226, .T. ) ;
+#18 = CYLINDRICAL_SURFACE ( 'NONE', #7, 1.500000000000000000 ) ;
+#19 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #149, #148 ) ;
+#20 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #130, #129 ) ;
+#21 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #127, #126 ) ;
+#22 = AXIS2_PLACEMENT_3D ( 'NONE', #163, #162, #160 ) ;
+#23 = VECTOR ( 'NONE', #134, 1000.000000000000000 ) ;
+#24 = CLOSED_SHELL ( 'NONE', ( #258, #255, #259, #257, #254, #260, #263, #262, #264, #301 ) ) ;
+#25 = VECTOR ( 'NONE', #166, 1000.000000000000000 ) ;
+#26 = FACE_OUTER_BOUND ( 'NONE', #225, .T. ) ;
+#27 = AXIS2_PLACEMENT_3D ( 'NONE', #169, #165, #164 ) ;
+#28 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #171, #170 ) ;
+#29 = VECTOR ( 'NONE', #176, 1000.000000000000000 ) ;
+#30 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #158, #157 ) ;
+#31 = CYLINDRICAL_SURFACE ( 'NONE', #32, 1.999999999999999600 ) ;
+#32 = AXIS2_PLACEMENT_3D ( 'NONE', #180, #203, #205 ) ;
+#33 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #155, #154 ) ;
+#34 = CYLINDRICAL_SURFACE ( 'NONE', #35, 7.500000000000000000 ) ;
+#35 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #221, #181 ) ;
+#36 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #174, #173 ) ;
+#37 = FACE_OUTER_BOUND ( 'NONE', #234, .T. ) ;
+#38 = AXIS2_PLACEMENT_3D ( 'NONE', #75, #74, #73 ) ;
+#39 = AXIS2_PLACEMENT_3D ( 'NONE', #72, #71, #70 ) ;
+#40 = FACE_OUTER_BOUND ( 'NONE', #224, .T. ) ;
+#41 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #67, #61 ) ;
+#42 = FACE_BOUND ( 'NONE', #235, .T. ) ;
+#43 = FACE_OUTER_BOUND ( 'NONE', #223, .T. ) ;
+#44 = CYLINDRICAL_SURFACE ( 'NONE', #45, 7.500000000000000000 ) ;
+#45 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #80, #79 ) ;
+#46 = FACE_OUTER_BOUND ( 'NONE', #227, .T. ) ;
+#47 = CYLINDRICAL_SURFACE ( 'NONE', #48, 1.999999999999999600 ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #83, #82 ) ;
+#49 = FACE_OUTER_BOUND ( 'NONE', #232, .T. ) ;
+#50 = CYLINDRICAL_SURFACE ( 'NONE', #51, 1.500000000000000000 ) ;
+#51 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #86, #85 ) ;
+#52 = AXIS2_PLACEMENT_3D ( 'NONE', #183, #179, #178 ) ;
+#53 = FACE_OUTER_BOUND ( 'NONE', #228, .T. ) ;
+#54 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #313 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #109, #108, #107 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#55 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #316 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #106, #105, #104 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#56 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #315 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #96, #95, #94 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#57 = ORIENTED_EDGE ( 'NONE', *, *, #298, .F. ) ;
+#58 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#59 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #292, .F. ) ;
+#61 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#62 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #297, .T. ) ;
+#64 = ORIENTED_EDGE ( 'NONE', *, *, #298, .T. ) ;
+#65 = ORIENTED_EDGE ( 'NONE', *, *, #299, .F. ) ;
+#66 = ORIENTED_EDGE ( 'NONE', *, *, #287, .F. ) ;
+#67 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #296, .T. ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.500000000000003100, 0.0000000000000000000 ) ) ;
+#70 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#71 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#72 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.500000000000003100, 0.0000000000000000000 ) ) ;
+#73 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#74 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#75 = CARTESIAN_POINT ( 'NONE',  ( 1.499999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#76 = PLANE ( 'NONE',  #38 ) ;
+#77 = VERTEX_POINT ( 'NONE', #199 ) ;
+#78 = ORIENTED_EDGE ( 'NONE', *, *, #297, .F. ) ;
+#79 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#80 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#81 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#82 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#83 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#84 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#85 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#86 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#87 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#88 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #305 ) ;
+#89 = PRODUCT_CONTEXT ( 'NONE', #304, 'mechanical' ) ;
+#90 = SHAPE_DEFINITION_REPRESENTATION ( #311, #314 ) ;
+#91 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#92 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#93 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#94 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#95 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#96 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#97 = PRESENTATION_STYLE_ASSIGNMENT (( #98 ) ) ;
+#98 = SURFACE_STYLE_USAGE ( .BOTH. , #99 ) ;
+#99 = SURFACE_SIDE_STYLE ('',( #100 ) ) ;
+#100 = SURFACE_STYLE_FILL_AREA ( #101 ) ;
+#101 = FILL_AREA_STYLE ('',( #102 ) ) ;
+#102 = FILL_AREA_STYLE_COLOUR ( '', #268 ) ;
+#103 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #304 ) ;
+#104 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#105 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#106 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#107 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#108 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#109 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#110 = PRESENTATION_STYLE_ASSIGNMENT (( #111 ) ) ;
+#111 = SURFACE_STYLE_USAGE ( .BOTH. , #112 ) ;
+#112 = SURFACE_SIDE_STYLE ('',( #113 ) ) ;
+#113 = SURFACE_STYLE_FILL_AREA ( #114 ) ;
+#114 = FILL_AREA_STYLE ('',( #115 ) ) ;
+#115 = FILL_AREA_STYLE_COLOUR ( '', #269 ) ;
+#116 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#117 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#118 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#119 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#120 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#121 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#122 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#123 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 1.499999999999999600, 9.445493555586548200, 0.0000000000000000000 ) ) ;
+#125 = PLANE ( 'NONE',  #8 ) ;
+#126 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#127 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#128 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.945493555586548200, 0.0000000000000000000 ) ) ;
+#129 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#130 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.445493555586548200, 0.0000000000000000000 ) ) ;
+#132 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#133 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#134 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#135 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.500000000000000000 ) ) ;
+#136 = LINE ( 'NONE', #135, #23 ) ;
+#137 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000000000 ) ) ;
+#139 = LINE ( 'NONE', #138, #12 ) ;
+#140 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( 1.836970198721029900E-016, 0.0000000000000000000, 1.500000000000000000 ) ) ;
+#142 = ORIENTED_EDGE ( 'NONE', *, *, #295, .F. ) ;
+#143 = LINE ( 'NONE', #141, #3 ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#145 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#146 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#148 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#149 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#150 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147900E-016, 0.0000000000000000000, 7.500000000000000000 ) ) ;
+#152 = LINE ( 'NONE', #151, #14 ) ;
+#153 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.445493555586548200, 0.0000000000000000000 ) ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#155 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.500000000000003100, 0.0000000000000000000 ) ) ;
+#157 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#158 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#159 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.945493555586548200, 0.0000000000000000000 ) ) ;
+#160 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#161 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ;
+#162 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#163 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.445493555586548200, 0.0000000000000000000 ) ) ;
+#164 = DIRECTION ( 'NONE',  ( -1.224646799147353200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#165 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.224646799147353200E-016 ) ) ;
+#166 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#167 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.999999999999999600 ) ) ;
+#168 = LINE ( 'NONE', #167, #25 ) ;
+#169 = CARTESIAN_POINT ( 'NONE',  ( 1.191872225355948400E-016, 3.500000000000003100, 0.9732375295356801000 ) ) ;
+#170 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#171 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#172 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.445493555586548200, 0.0000000000000000000 ) ) ;
+#173 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#174 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.500000000000003100, -0.9732375295356801000 ) ) ;
+#176 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#177 = CARTESIAN_POINT ( 'NONE',  ( 2.449293598294705900E-016, 0.0000000000000000000, 1.999999999999999600 ) ) ;
+#178 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#179 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#180 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#181 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#182 = LINE ( 'NONE', #177, #29 ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.500000000000003100, 0.0000000000000000000 ) ) ;
+#184 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#185 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #294, .T. ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147900E-016, 3.500000000000003100, 7.500000000000000000 ) ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 2.449293598294706400E-016, 9.445493555586548200, 2.000000000000000000 ) ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.945493555586548200, -1.999999999999999100 ) ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( 9.184850993605147900E-016, 0.0000000000000000000, 7.500000000000000000 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000000000 ) ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.445493555586548200, -2.000000000000000000 ) ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.445493555586548200, -1.500000000000000000 ) ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( 1.836970198721029900E-016, 0.0000000000000000000, 1.500000000000000000 ) ) ;
+#196 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.500000000000003100, -7.500000000000000000 ) ) ;
+#197 = CARTESIAN_POINT ( 'NONE',  ( 1.836970198721029900E-016, 9.445493555586548200, 1.500000000000000000 ) ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.500000000000000000 ) ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( 5.817072295949922500E-016, 9.945493555586548200, 1.999999999999999100 ) ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ;
+#201 = ORIENTED_EDGE ( 'NONE', *, *, #294, .F. ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #292, .T. ) ;
+#203 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#204 = ORIENTED_EDGE ( 'NONE', *, *, #296, .F. ) ;
+#205 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#206 = ORIENTED_EDGE ( 'NONE', *, *, #299, .T. ) ;
+#207 = ORIENTED_EDGE ( 'NONE', *, *, #287, .T. ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #293, .F. ) ;
+#209 = VERTEX_POINT ( 'NONE', #198 ) ;
+#210 = ORIENTED_EDGE ( 'NONE', *, *, #289, .F. ) ;
+#211 = ORIENTED_EDGE ( 'NONE', *, *, #293, .T. ) ;
+#212 = VERTEX_POINT ( 'NONE', #197 ) ;
+#213 = VERTEX_POINT ( 'NONE', #194 ) ;
+#214 = VERTEX_POINT ( 'NONE', #195 ) ;
+#215 = VERTEX_POINT ( 'NONE', #196 ) ;
+#216 = VERTEX_POINT ( 'NONE', #191 ) ;
+#217 = VERTEX_POINT ( 'NONE', #192 ) ;
+#218 = VERTEX_POINT ( 'NONE', #193 ) ;
+#219 = VERTEX_POINT ( 'NONE', #188 ) ;
+#220 = VERTEX_POINT ( 'NONE', #189 ) ;
+#221 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#222 = ORIENTED_EDGE ( 'NONE', *, *, #286, .F. ) ;
+#223 = EDGE_LOOP ( 'NONE', ( #60, #161, #68, #57 ) ) ;
+#224 = EDGE_LOOP ( 'NONE', ( #245, #62, #59, #244 ) ) ;
+#225 = EDGE_LOOP ( 'NONE', ( #142, #65, #63, #247 ) ) ;
+#226 = EDGE_LOOP ( 'NONE', ( #250, #252, #246, #66 ) ) ;
+#227 = EDGE_LOOP ( 'NONE', ( #187, #64 ) ) ;
+#228 = EDGE_LOOP ( 'NONE', ( #238, #240, #237, #241 ) ) ;
+#229 = EDGE_LOOP ( 'NONE', ( #208, #242, #248, #78 ) ) ;
+#230 = EDGE_LOOP ( 'NONE', ( #206, #211 ) ) ;
+#231 = EDGE_LOOP ( 'NONE', ( #210, #222 ) ) ;
+#232 = EDGE_LOOP ( 'NONE', ( #200, #202, #201, #204 ) ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #290, .F. ) ;
+#234 = EDGE_LOOP ( 'NONE', ( #239, #233, #207, #236 ) ) ;
+#235 = EDGE_LOOP ( 'NONE', ( #249, #251 ) ) ;
+#236 = ORIENTED_EDGE ( 'NONE', *, *, #289, .T. ) ;
+#237 = ORIENTED_EDGE ( 'NONE', *, *, #266, .T. ) ;
+#238 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ;
+#239 = ORIENTED_EDGE ( 'NONE', *, *, #265, .F. ) ;
+#240 = ORIENTED_EDGE ( 'NONE', *, *, #300, .T. ) ;
+#241 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ;
+#242 = ORIENTED_EDGE ( 'NONE', *, *, #295, .T. ) ;
+#243 = VERTEX_POINT ( 'NONE', #190 ) ;
+#244 = ORIENTED_EDGE ( 'NONE', *, *, #266, .F. ) ;
+#245 = ORIENTED_EDGE ( 'NONE', *, *, #290, .T. ) ;
+#246 = ORIENTED_EDGE ( 'NONE', *, *, #286, .T. ) ;
+#247 = ORIENTED_EDGE ( 'NONE', *, *, #302, .T. ) ;
+#248 = ORIENTED_EDGE ( 'NONE', *, *, #303, .T. ) ;
+#249 = ORIENTED_EDGE ( 'NONE', *, *, #302, .F. ) ;
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #300, .F. ) ;
+#251 = ORIENTED_EDGE ( 'NONE', *, *, #303, .F. ) ;
+#252 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ;
+#253 = PRODUCT ( 'nose', 'nose', '', ( #89 ) ) ;
+#254 = ADVANCED_FACE ( 'NONE', ( #26 ), #18, .F. ) ;
+#255 = ADVANCED_FACE ( 'NONE', ( #40 ), #284, .T. ) ;
+#256 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #309, #310 ) ;
+#257 = ADVANCED_FACE ( 'NONE', ( #16 ), #50, .F. ) ;
+#258 = ADVANCED_FACE ( 'NONE', ( #17 ), #47, .F. ) ;
+#259 = ADVANCED_FACE ( 'NONE', ( #49 ), #44, .T. ) ;
+#260 = ADVANCED_FACE ( 'NONE', ( #46, #42 ), #76, .T. ) ;
+#261 = EDGE_CURVE ( 'NONE', #219, #215, #285, .T. ) ;
+#262 = ADVANCED_FACE ( 'NONE', ( #53 ), #281, .T. ) ;
+#263 = ADVANCED_FACE ( 'NONE', ( #43 ), #34, .T. ) ;
+#264 = ADVANCED_FACE ( 'NONE', ( #37 ), #31, .F. ) ;
+#265 = EDGE_CURVE ( 'NONE', #77, #220, #182, .T. ) ;
+#266 = EDGE_CURVE ( 'NONE', #243, #215, #283, .T. ) ;
+#267 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #253 ) ) ;
+#268 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#269 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#270 = CIRCLE ( 'NONE', #5, 1.500000000000000000 ) ;
+#271 = CIRCLE ( 'NONE', #6, 1.500000000000000000 ) ;
+#272 = CIRCLE ( 'NONE', #21, 1.999999999999999100 ) ;
+#273 = CIRCLE ( 'NONE', #20, 1.500000000000000000 ) ;
+#274 = CIRCLE ( 'NONE', #13, 7.500000000000000000 ) ;
+#275 = CIRCLE ( 'NONE', #11, 7.500000000000000000 ) ;
+#276 = CIRCLE ( 'NONE', #19, 1.500000000000000000 ) ;
+#277 = CIRCLE ( 'NONE', #33, 7.500000000000000000 ) ;
+#278 = CIRCLE ( 'NONE', #30, 1.999999999999999100 ) ;
+#279 = CIRCLE ( 'NONE', #22, 2.000000000000000000 ) ;
+#280 = CIRCLE ( 'NONE', #27, 6.526762470464319700 ) ;
+#281 = TOROIDAL_SURFACE ( 'NONE', #41, 0.9732375295356801000, 6.526762470464319700 ) ;
+#282 = CIRCLE ( 'NONE', #28, 2.000000000000000000 ) ;
+#283 = CIRCLE ( 'NONE', #36, 6.526762470464319700 ) ;
+#284 = TOROIDAL_SURFACE ( 'NONE', #52, 0.9732375295356801000, 6.526762470464319700 ) ;
+#285 = CIRCLE ( 'NONE', #39, 7.500000000000000000 ) ;
+#286 = EDGE_CURVE ( 'NONE', #220, #218, #282, .T. ) ;
+#287 = EDGE_CURVE ( 'NONE', #243, #218, #168, .T. ) ;
+#288 = EDGE_CURVE ( 'NONE', #77, #219, #280, .T. ) ;
+#289 = EDGE_CURVE ( 'NONE', #218, #220, #279, .T. ) ;
+#290 = EDGE_CURVE ( 'NONE', #243, #77, #278, .T. ) ;
+#291 = EDGE_CURVE ( 'NONE', #215, #219, #277, .T. ) ;
+#292 = EDGE_CURVE ( 'NONE', #219, #216, #152, .T. ) ;
+#293 = EDGE_CURVE ( 'NONE', #212, #213, #276, .T. ) ;
+#294 = EDGE_CURVE ( 'NONE', #217, #216, #275, .T. ) ;
+#295 = EDGE_CURVE ( 'NONE', #212, #214, #143, .T. ) ;
+#296 = EDGE_CURVE ( 'NONE', #215, #217, #139, .T. ) ;
+#297 = EDGE_CURVE ( 'NONE', #213, #209, #136, .T. ) ;
+#298 = EDGE_CURVE ( 'NONE', #216, #217, #274, .T. ) ;
+#299 = EDGE_CURVE ( 'NONE', #213, #212, #273, .T. ) ;
+#300 = EDGE_CURVE ( 'NONE', #77, #243, #272, .T. ) ;
+#301 = ADVANCED_FACE ( 'NONE', ( #15, #10 ), #125, .T. ) ;
+#302 = EDGE_CURVE ( 'NONE', #209, #214, #270, .T. ) ;
+#303 = EDGE_CURVE ( 'NONE', #214, #209, #271, .T. ) ;
+#304 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#305 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#306 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #92, #91 ) ;
+#307 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #9 ), #56 ) ;
+#308 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #9 ) ) ;
+#309 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #253, .NOT_KNOWN. ) ;
+#310 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #305, 'design' ) ;
+#311 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #256 ) ;
+#312 = MANIFOLD_SOLID_BREP ( 'Revolve1', #24 ) ;
+#313 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #109, 'distance_accuracy_value', 'NONE');
+#314 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'nose', ( #312, #306 ), #55 ) ;
+#315 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #96, 'distance_accuracy_value', 'NONE');
+#316 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #106, 'distance_accuracy_value', 'NONE');
+ENDSEC;
+END-ISO-10303-21;