diff --git a/Firearms/Card_Counter_Pepperbox-RollaTroll/README.md b/Firearms/Card_Counter_Pepperbox-RollaTroll/README.md
index 57e87a4..3b0b6f4 100644
--- a/Firearms/Card_Counter_Pepperbox-RollaTroll/README.md
+++ b/Firearms/Card_Counter_Pepperbox-RollaTroll/README.md
@@ -1,4 +1,4 @@
-# card Counter Pepperbox
+# Card Counter Pepperbox
 
 #### Author 
 RollaTroll
diff --git a/Firearms/Liberators/Baby_Biden_Pistol_v1.0-Proteus/README.md b/Firearms/Liberators/Baby_Biden_Pistol_v1.0-Proteus/README.md
index 7b775a2..b29bf55 100644
--- a/Firearms/Liberators/Baby_Biden_Pistol_v1.0-Proteus/README.md
+++ b/Firearms/Liberators/Baby_Biden_Pistol_v1.0-Proteus/README.md
@@ -1,13 +1,16 @@
-# Biden Double Barrel Shotgun Pistol -Proteus
+# Biden Double Barrel Shotgun Pistol
 
-# Version 
+#### Author
+Proteus
+
+#### Version 
 1.0
 
-# Description 
+#### Description 
 * "Vice President Approved!"
 * Caliber: .45 Long Colt / .410 Shotshell
 
-# Instructions
+#### Instructions
 Print the all parts in the folder as well as the following Liberator parts: two triggers, two hammers, two hammer bodies, 6 frame pins, 1 grip pin, 4 hammer springs, 2 trigger springs, 2 firing pins, 2 firing pin bushings.
 
 Assemble as you would a liberator but doubled. Put the barrelpin2 into the hinge connecting the barrel to the frame, and the barrelpin into the hole ontop locking the barrel in place.
diff --git a/Firearms/Liberators/Hydra_Liberator_Rifle_v2.0-Proteus/README.md b/Firearms/Liberators/Hydra_Liberator_Rifle_v2.0-Proteus/README.md
index e8e97e7..53a63cf 100644
--- a/Firearms/Liberators/Hydra_Liberator_Rifle_v2.0-Proteus/README.md
+++ b/Firearms/Liberators/Hydra_Liberator_Rifle_v2.0-Proteus/README.md
@@ -1,4 +1,7 @@
-# Hydra Liberator Rifle -Proteus
+# Hydra Liberator Rifle 
+
+#### Author
+Proteus
 
 #### Version
 2.0
diff --git a/Firearms/Liberators/Liberator_Glock_Frame-Proteus/README.md b/Firearms/Liberators/Liberator_Glock_Frame-Proteus/README.md
index 78d9368..c041db2 100644
--- a/Firearms/Liberators/Liberator_Glock_Frame-Proteus/README.md
+++ b/Firearms/Liberators/Liberator_Glock_Frame-Proteus/README.md
@@ -1,4 +1,7 @@
-# Liberator Glock Frame -Proteus
+# Liberator Glock Frame 
+
+#### Author
+Proteus
 
 #### Version 
 1.0
diff --git a/Firearms/Reprringer_6mm_v2.0-free-d/README.md b/Firearms/Reprringer_6mm_v2.0-free-d/README.md
index 101b81a..af9f2bd 100644
--- a/Firearms/Reprringer_6mm_v2.0-free-d/README.md
+++ b/Firearms/Reprringer_6mm_v2.0-free-d/README.md
@@ -1,4 +1,4 @@
-# Defcad Reprringer
+# Reprringer 6mm
 
 #### Author
 free-d
diff --git a/Misc/AR-15_Hard_Mag_Pouch_V3-Shanrilivan/README.md b/Misc/AR-15_Hard_Mag_Pouch_V3-Shanrilivan/README.md
index fe55178..64819ee 100644
--- a/Misc/AR-15_Hard_Mag_Pouch_V3-Shanrilivan/README.md
+++ b/Misc/AR-15_Hard_Mag_Pouch_V3-Shanrilivan/README.md
@@ -1,6 +1,9 @@
-#AR-15 Hard Mag Pouch V3
+#AR-15 Hard Mag Pouch
 
-# ASSEMBLY: 
+#### Version
+3.0
+
+#### ASSEMBLY: 
 
 Glue Collar part 2 to flat side (without nubs) of Collar Part 1 so that groove allows spring tab movement. Glue Collar assembly to circular flat of chosen clip. Position Clip Assembly on circular area of chosen pouch. Apply glue to tip of Clip Peg and pass through hole in pouch from inside. DO NOT GLUE INTERIOR FACE OF CLIP PEG OR HOLE unless you do NOT want to be able to adjust carry angle.
 
diff --git a/Pistols/AR-15_Single_Shot_Upper_Receiver_v2.0-Proteus/README.md b/Pistols/AR-15_Single_Shot_Upper_Receiver_v2.0-Proteus/README.md
index 0a7f89c..573d7ff 100644
--- a/Pistols/AR-15_Single_Shot_Upper_Receiver_v2.0-Proteus/README.md
+++ b/Pistols/AR-15_Single_Shot_Upper_Receiver_v2.0-Proteus/README.md
@@ -1,4 +1,4 @@
-# Single Shot AR-15 Upper
+# Single Shot AR-15 Upper Receiver
 
 #### Author 
 Proteus