diff --git a/Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md b/Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md
index 26fc3cb..50a1042 100644
--- a/Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md
+++ b/Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md
@@ -1,4 +1,4 @@
-# FOSSCAD Trigger Module (rev5)
+# FOSSCAD Trigger Module (rev 5)
 
 #### Author
 
@@ -6,4 +6,4 @@ shadowfall
 
 #### Description
 
-This is the FOSSCAD Triger Module revision 5, (see Renders/module_assembled-printed.jpg). The module provides a 3d drop in FCG for FOSSCAD compatible AR plateforms. it requires that you use a AR-15 parts kits.  You can then assemble said parts into the module and install it into a FOSSCAD compatible lower receiver.  The module requires a 3mm cross pin to hold it in place (see crosspin.stl) which can be printed, however, a metal cross pin is recommended.  This pin should be as long as the outside of the receiver.
+This is the FOSSCAD Triger Module revision 5 (see Renders/module_assembled-printed.jpg). The module provides a 3d drop in FCG for FOSSCAD compatible AR plateforms. it requires that you use a AR-15 parts kits.  You can then assemble said parts into the module and install it into a FOSSCAD compatible lower receiver.  The module requires a 3mm cross pin to hold it in place (see crosspin.stl) which can be printed, however, a metal cross pin is recommended.  This pin should be as long as the outside of the receiver.