Merge branch 'master' of github.com:maduce/fosscad-repo

Misc/AR-15-80_Percent_Lower_Receiver_Milling_Jig-CTRLPew/README.md

@@ -1,17 +1,17 @@
 # 80% AR-15 Lower Receiver Milling Jig
 
 #### Author, Testing & Technical Author
-buildtoshoot
+CTRL+Pew
 
 #### Version
 1.0
 
 #### Description 
-This is the 80% AR-15 Lower Receiver Milling Jig by Buildtoshoot.  This is a self-aligning jig which allows one to finish 80% lowers from a variety of manufacturers using only a drill press and a few common tools.
+This is the 80% AR-15 Lower Receiver Milling Jig by CTRL+Pew. This is a self-aligning jig which allows one to finish 80% lowers from a variety of manufacturers using only a drill press and a few common tools.
 
 Mill following the instructions from SpecSheets/Jig_Manual_80_Percent_Arms.rev1.1S.doc.pdf skipping the drilling step since i didnt make a drilling plate.
 
-Follow me on Instagram @buildtoshoot for more shenanigans. https://www.instagram.com/buildtoshoot/
+Find me on the internet for more shenanigans. https://www.ctrlpew.com 
 
 #### Hardware
 ##### Sides

Misc/FOSSCAD_AFG_GRIP-Warfairy/README.md

@@ -7,6 +7,6 @@ Warfairy
 1.0
 
 #### Description
-This Grip is inspired by the Magpul AFG rail grip. It is printed as a single piece, uses M5x0.8 Socket Head Screws and M5x0.8 8mm nuts. You will need 2 of each.
+This Grip is inspired by the Magpul AFG rail grip. It is printed as a single piece, uses M5x0.8 Socket Head Screws, 30mm long and M5x0.8 8mm nuts. You will need 2 of each.