Adding Protector 9mm Handgun version 1.0 by Proteus.

Firearms/Protector_9mm_v1.0-Proteus/README.md

@@ -0,0 +1,52 @@
+# 'Protector' Semiautomatic Pistol 
+
+#### Author
+Proteus
+
+#### Version
+1.0
+
+#### Caliber(s)
+9mm
+
+#### PRINT THE FOLLOWING (ABS OR PC, NO PLA)
+* All STLs in the folder.
+* (Optional) A Sinewave Spring for the magazine.
+
+#### OBTAIN THE FOLLOWING:
+* 9mm Glock Barrel
+* Magazine spring (Unless you printed)
+* AR-15 Buffer Spring
+* AR-15 FCG & Springs
+* LEAD weights. See below.
+* AR-15 Firing Pin
+
+#### ASSEMBLY
+Remove supports from parts. First, insert the Glock barrel into the slots in the front of the receiver. Slot the retainer around the barrel,
+Making sure it stays down and does not move. Use MEK to secure the barrel by using it on the retainer. Unfortunately this means that
+the barrel cannot be removed without breaking the receiver, but you should not have to remove as the receiver will crack long before
+the steel barrel breaks. Add FCG at this point through the back of the receiver.
+Give both bolt pieces an Acetone Vapor treatment. Next, take bolt_1 and insert the AR-15 firing pin 
+in the back. Make sure it slides well and extends far enough out the front. MEK bolt_2 onto the back of bolt_1. 
+Add lead weights to the holes on both the guide rail that extends into the buffer tube and to the hole in the front.
+NOTE that these weights need fill the hole AS MUCH AS POSSIBLE. The bolt much weigh 1.7lb when finished. If the holes are filled correctly you will hit this weight.
+Insert the finished bolt into the back of the receiver. Make sure it slides correctly and does not jam. Be sure the ejection port is clear.
+Take the small handle and MEK it onto the bolt with in the receiver. Make sure that the mek does not weld the handle OR bolt to the receiver. This is very important.
+Assemble magazine by adding follower, spring, and then pushing the plate on. Make sure the magplate stays on and does NOT slide.
+Add 9mm ammunition, you should be able to fit about 10. Insert magazine into receiver, the side lever should click into place and secure the magazine.
+Release by pressing the lever until it falls. 
+Wait 24 hours or more for all MEKed parts to dry completely. 
+Add the buffer spring into the buffer tube. Put the pin into the hole to secure. The buffer tube should not rotate due to the square holders.
+Make sure everything is working properly. This gun is DIRECT BLOWBACK, so once you load there is no way to remove until you fire.
+Pull handle back and release. It should load a round. Pull trigger to fire. After each shot the weapon should cycle to the next round and eject the spent case.
+
+#### SAFETY
+The bolt weight ***MUST*** be 1.7LB. If it is NOT 1.7LB, DO NOT FIRE. You will risk an explosion. For the first shots, fire away from you using a string tied to the trigger. 
+
+#### AMERICAN LEGALITY
+In CA, this weapon is illegal due to ZIPGUN laws and the ban of pistols with magazines in the front. In NY, this weapon is illegal due to 10 round magazine. Other states *may* have a ban on this weapon if it is considered an AR-15 due to using the FCG. Please verify with ATF.
+
+#### CREDITS
+WarFairy: For original FCG design.
+
+FOSSCAD2013

Firearms/Protector_9mm_v1.0-Proteus/STEP/bolt_2.step

@@ -0,0 +1,936 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('bolt_2.STEP',
+    '2013-11-06T02:13:30',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = ORIENTED_EDGE ( 'NONE', *, *, #421, .T. ) ;
+#2 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#3 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#4 = VERTEX_POINT ( 'NONE', #193 ) ;
+#5 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #803 ) ) ;
+#6 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#7 = ADVANCED_FACE ( 'NONE', ( #788 ), #69, .T. ) ;
+#8 = EDGE_CURVE ( 'NONE', #825, #819, #653, .T. ) ;
+#9 = VECTOR ( 'NONE', #114, 39.37007874015748100 ) ;
+#10 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#11 = EDGE_LOOP ( 'NONE', ( #606, #659, #123, #488, #400 ) ) ;
+#12 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#13 = ORIENTED_EDGE ( 'NONE', *, *, #838, .T. ) ;
+#14 = ORIENTED_EDGE ( 'NONE', *, *, #625, .F. ) ;
+#15 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#16 = AXIS2_PLACEMENT_3D ( 'NONE', #263, #694, #10 ) ;
+#17 = VECTOR ( 'NONE', #341, 39.37007874015748100 ) ;
+#18 = EDGE_CURVE ( 'NONE', #470, #347, #376, .T. ) ;
+#19 = ORIENTED_EDGE ( 'NONE', *, *, #783, .T. ) ;
+#20 = PLANE ( 'NONE',  #383 ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( 0.6500000000000000200, 8.572527594031473200E-017, -1.899999999999999900 ) ) ;
+#22 = ORIENTED_EDGE ( 'NONE', *, *, #838, .F. ) ;
+#23 = FILL_AREA_STYLE_COLOUR ( '', #243 ) ;
+#24 = CYLINDRICAL_SURFACE ( 'NONE', #378, 0.3750000000000000600 ) ;
+#25 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#26 = LINE ( 'NONE', #176, #194 ) ;
+#27 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#28 = VERTEX_POINT ( 'NONE', #133 ) ;
+#29 = EDGE_CURVE ( 'NONE', #286, #352, #64, .T. ) ;
+#30 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, -0.01895103217062699800, -1.869187347533550500 ) ) ;
+#32 =( CONVERSION_BASED_UNIT ( 'INCH', #541 ) LENGTH_UNIT ( ) NAMED_UNIT ( #529 ) );
+#33 = LINE ( 'NONE', #801, #479 ) ;
+#34 = EDGE_LOOP ( 'NONE', ( #103, #846, #750, #732 ) ) ;
+#35 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#36 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#37 = CARTESIAN_POINT ( 'NONE',  ( 0.3640502763235490800, -0.5500000000000001600, -1.899999999999999900 ) ) ;
+#38 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, 0.01893479017884038000, -1.868994487317868500 ) ) ;
+#39 = CARTESIAN_POINT ( 'NONE',  ( 0.5094604324371614400, -0.5499999999999998200, -1.808893945535922500 ) ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002198100, -0.2009544312483522400, -1.809525939076196400 ) ) ;
+#41 = AXIS2_PLACEMENT_3D ( 'NONE', #719, #784, #861 ) ;
+#42 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#43 = PRESENTATION_STYLE_ASSIGNMENT (( #355 ) ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002198100, -0.1965603900076165200, -1.817936612873329000 ) ) ;
+#45 = FACE_OUTER_BOUND ( 'NONE', #73, .T. ) ;
+#46 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.8499999999999999800 ) ) ;
+#47 = EDGE_CURVE ( 'NONE', #326, #365, #311, .T. ) ;
+#48 = FACE_OUTER_BOUND ( 'NONE', #563, .T. ) ;
+#49 = CARTESIAN_POINT ( 'NONE',  ( 0.3750000000000000600, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#50 = ADVANCED_FACE ( 'NONE', ( #728 ), #353, .F. ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002201500, 0.09417123015471695600, -1.862653292207898700 ) ) ;
+#52 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.2022979235396196200, -3.899999999999999500 ) ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( 0.4163332134752045200, -0.5500000000000000400, -1.892416466738380300 ) ) ;
+#54 = DIRECTION ( 'NONE',  ( -1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.799999999999999800 ) ) ;
+#56 = ADVANCED_FACE ( 'NONE', ( #409 ), #459, .T. ) ;
+#57 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#58 = DIRECTION ( 'NONE',  ( 6.752041607409858700E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#59 = ADVANCED_FACE ( 'NONE', ( #273 ), #20, .F. ) ;
+#60 = CIRCLE ( 'NONE', #478, 0.3750000000000000600 ) ;
+#61 = ADVANCED_FACE ( 'NONE', ( #83 ), #116, .T. ) ;
+#62 = VECTOR ( 'NONE', #42, 39.37007874015748100 ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.4499999999999999000, -1.599999999999999900 ) ) ;
+#64 = LINE ( 'NONE', #610, #173 ) ;
+#65 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#66 = EDGE_LOOP ( 'NONE', ( #19, #873, #579, #278, #706, #139, #435, #1 ) ) ;
+#67 = CARTESIAN_POINT ( 'NONE',  ( -0.6500000000000000200, 0.0000000000000000000, -1.799999999999999800 ) ) ;
+#68 = EDGE_CURVE ( 'NONE', #818, #458, #554, .T. ) ;
+#69 = PLANE ( 'NONE',  #284 ) ;
+#70 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ;
+#71 = CYLINDRICAL_SURFACE ( 'NONE', #212, 0.09999999999999999200 ) ;
+#72 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#73 = EDGE_LOOP ( 'NONE', ( #740, #164 ) ) ;
+#74 = DIRECTION ( 'NONE',  ( -0.7071067811865534600, -0.7071067811865413600, 0.0000000000000000000 ) ) ;
+#75 = EDGE_LOOP ( 'NONE', ( #686, #122, #142, #811 ) ) ;
+#76 = EDGE_CURVE ( 'NONE', #286, #323, #605, .T. ) ;
+#77 = FACE_OUTER_BOUND ( 'NONE', #269, .T. ) ;
+#78 = FACE_OUTER_BOUND ( 'NONE', #875, .T. ) ;
+#79 = VERTEX_POINT ( 'NONE', #289 ) ;
+#80 = VERTEX_POINT ( 'NONE', #779 ) ;
+#81 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #871, #586, #100, #738, #582, #648, #180, #321, #170, #882, #644, #729, #439, #51, #813, #526, #318, #38, #657, #510 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.01734333567000012300, 0.01770628578249068900, 0.01806923589498125200, 0.01843218600747181800, 0.01879513611996238400, 0.01952103634494351300, 0.02024693656992464200, 0.02169873701988690000, 0.02242463724486803300, 0.02315053746984916200 ),
+ .UNSPECIFIED. ) ;
+#82 = LINE ( 'NONE', #797, #527 ) ;
+#83 = FACE_OUTER_BOUND ( 'NONE', #727, .T. ) ;
+#84 = AXIS2_PLACEMENT_3D ( 'NONE', #501, #30, #440 ) ;
+#85 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, -0.09437740929397167600, -1.862624251502786200 ) ) ;
+#86 = FILL_AREA_STYLE ('',( #23 ) ) ;
+#87 = EDGE_CURVE ( 'NONE', #617, #483, #219, .T. ) ;
+#88 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.9000009842519686200, -1.599999999999999900 ) ) ;
+#89 = EDGE_LOOP ( 'NONE', ( #217, #336 ) ) ;
+#90 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#91 = FACE_OUTER_BOUND ( 'NONE', #667, .T. ) ;
+#92 = PLANE ( 'NONE',  #279 ) ;
+#93 = LINE ( 'NONE', #99, #768 ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, 0.3499999999999998700, -1.599999999999999900 ) ) ;
+#95 = VERTEX_POINT ( 'NONE', #722 ) ;
+#96 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#97 = VERTEX_POINT ( 'NONE', #856 ) ;
+#98 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -1.776356839400250500E-015, 0.0000000000000000000 ) ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( -0.2981387584279082700, 2.081891822873805300E-015, -1.899999999999999900 ) ) ;
+#100 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002201500, 0.2009443794244365500, -1.809564681306024700 ) ) ;
+#101 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#102 = EDGE_CURVE ( 'NONE', #494, #470, #93, .T. ) ;
+#103 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ;
+#104 = VECTOR ( 'NONE', #260, 39.37007874015748100 ) ;
+#105 = CARTESIAN_POINT ( 'NONE',  ( -0.3464101615137755200, -0.5500000000000000400, -1.899999999999999900 ) ) ;
+#106 = ORIENTED_EDGE ( 'NONE', *, *, #257, .F. ) ;
+#107 = CARTESIAN_POINT ( 'NONE',  ( 3.122837734310707600E-015, 0.2981387584279082700, -1.899999999999999900 ) ) ;
+#108 = CARTESIAN_POINT ( 'NONE',  ( 0.4966452863019981700, -0.5499999999999998200, -1.841552565064883000 ) ) ;
+#109 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.3499999999999998700, -1.599999999999999900 ) ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( -0.5099019513592768500, -0.5500000000000000400, -1.804416288483204900 ) ) ;
+#111 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#112 = LINE ( 'NONE', #197, #612 ) ;
+#113 = ORIENTED_EDGE ( 'NONE', *, *, #472, .T. ) ;
+#114 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#115 = EDGE_CURVE ( 'NONE', #624, #28, #807, .T. ) ;
+#116 = TOROIDAL_SURFACE ( 'NONE', #474, 0.6500000000000000200, 0.1000000000000000100 ) ;
+#117 = ORIENTED_EDGE ( 'NONE', *, *, #182, .T. ) ;
+#118 = AXIS2_PLACEMENT_3D ( 'NONE', #55, #447, #316 ) ;
+#119 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.9000009842519686200, -0.8499999999999999800 ) ) ;
+#120 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #685, #678 ) ;
+#121 = ADVANCED_FACE ( 'NONE', ( #424 ), #399, .T. ) ;
+#122 = ORIENTED_EDGE ( 'NONE', *, *, #543, .T. ) ;
+#123 = ORIENTED_EDGE ( 'NONE', *, *, #656, .F. ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 3.122837734310707600E-015, 0.2981387584279082700, -1.899999999999999900 ) ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.3499999999999999800, -1.599999999999999900 ) ) ;
+#126 = ORIENTED_EDGE ( 'NONE', *, *, #543, .F. ) ;
+#127 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #639, 'design' ) ;
+#128 = VECTOR ( 'NONE', #302, 39.37007874015748100 ) ;
+#129 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.3499999999999998700, -0.8499999999999999800 ) ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #396, .T. ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.599999999999999900 ) ) ;
+#132 = AXIS2_PLACEMENT_3D ( 'NONE', #765, #285, #566 ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.2022979235396196200, -0.8499999999999999800 ) ) ;
+#134 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, 0.3499999999999998700, -0.1000000000000000200 ) ) ;
+#135 = EDGE_CURVE ( 'NONE', #825, #448, #234, .T. ) ;
+#136 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#137 = VECTOR ( 'NONE', #720, 39.37007874015748100 ) ;
+#138 = VECTOR ( 'NONE', #710, 39.37007874015748100 ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #556, .T. ) ;
+#140 = ORIENTED_EDGE ( 'NONE', *, *, #115, .F. ) ;
+#141 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#142 = ORIENTED_EDGE ( 'NONE', *, *, #421, .F. ) ;
+#143 = CIRCLE ( 'NONE', #578, 0.3750000000000000600 ) ;
+#144 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #756 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #210, #560, #141 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#145 = AXIS2_PLACEMENT_3D ( 'NONE', #827, #152, #149 ) ;
+#146 = CIRCLE ( 'NONE', #780, 0.1000000000000000200 ) ;
+#147 = ORIENTED_EDGE ( 'NONE', *, *, #752, .F. ) ;
+#148 = ORIENTED_EDGE ( 'NONE', *, *, #759, .F. ) ;
+#149 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#150 = SURFACE_SIDE_STYLE ('',( #826 ) ) ;
+#151 = ORIENTED_EDGE ( 'NONE', *, *, #611, .T. ) ;
+#152 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #102, .F. ) ;
+#154 = PRODUCT_CONTEXT ( 'NONE', #767, 'mechanical' ) ;
+#155 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.7228416147400479300, 3.000000000000000400 ) ) ;
+#156 = DIRECTION ( 'NONE',  ( -0.7071067811865438000, 0.7071067811865512400, 0.0000000000000000000 ) ) ;
+#157 = CIRCLE ( 'NONE', #565, 0.6500000000000000200 ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #411, .T. ) ;
+#159 = FACE_OUTER_BOUND ( 'NONE', #646, .T. ) ;
+#160 = DIRECTION ( 'NONE',  ( 0.7071067811865438000, -0.7071067811865512400, 0.0000000000000000000 ) ) ;
+#161 = EDGE_LOOP ( 'NONE', ( #185, #831, #673, #13 ) ) ;
+#162 = EDGE_CURVE ( 'NONE', #641, #819, #616, .T. ) ;
+#163 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.8499999999999999800 ) ) ;
+#164 = ORIENTED_EDGE ( 'NONE', *, *, #257, .T. ) ;
+#165 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#166 = AXIS2_PLACEMENT_3D ( 'NONE', #575, #227, #511 ) ;
+#167 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.899999999999999900 ) ) ;
+#168 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -6.752041607409858700E-016, 0.0000000000000000000 ) ) ;
+#169 = LINE ( 'NONE', #545, #422 ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.1707215631379474800, -1.839038116099353600 ) ) ;
+#171 = FACE_OUTER_BOUND ( 'NONE', #256, .T. ) ;
+#172 = VERTEX_POINT ( 'NONE', #249 ) ;
+#173 = VECTOR ( 'NONE', #6, 39.37007874015748100 ) ;
+#174 = CARTESIAN_POINT ( 'NONE',  ( -0.3639273673704422900, -0.5500000000000001600, -1.900000000000000800 ) ) ;
+#175 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( -0.5099019513592785200, -0.5500000000000000400, -1.899999999999999900 ) ) ;
+#177 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002198100, -0.2022979235396205900, -1.799999999999999800 ) ) ;
+#178 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #555, #266 ) ;
+#179 = CARTESIAN_POINT ( 'NONE',  ( 0.3464101615137755200, -0.5500000000000000400, -1.899999999999999900 ) ) ;
+#180 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.1828123455297071300, -1.831440039479302900 ) ) ;
+#181 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#182 = EDGE_CURVE ( 'NONE', #97, #213, #562, .T. ) ;
+#183 = VECTOR ( 'NONE', #753, 39.37007874015748100 ) ;
+#184 = CARTESIAN_POINT ( 'NONE',  ( -0.4160104773976112700, -0.5499999999999999300, -1.892012772442281100 ) ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #220, .T. ) ;
+#186 = PLANE ( 'NONE',  #348 ) ;
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #759, .T. ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( -0.4789203157826358900, -0.5500000000000000400, -1.861358414404116400 ) ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, -0.5500000000000000400, -1.599999999999999900 ) ) ;
+#191 = ADVANCED_FACE ( 'NONE', ( #171 ), #305, .T. ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 0.2981387584279082700, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( 0.5099019513592785200, -0.5500000000000000400, -0.8499999999999999800 ) ) ;
+#194 = VECTOR ( 'NONE', #734, 39.37007874015748100 ) ;
+#195 = VERTEX_POINT ( 'NONE', #237 ) ;
+#196 = ORIENTED_EDGE ( 'NONE', *, *, #497, .T. ) ;
+#197 = CARTESIAN_POINT ( 'NONE',  ( 0.2981387584279082700, 0.0000000000000000000, -4.400000000000000400 ) ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5500000000000000400, -1.899999999999999900 ) ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.799999999999999800 ) ) ;
+#200 = EDGE_CURVE ( 'NONE', #641, #206, #26, .T. ) ;
+#201 = ORIENTED_EDGE ( 'NONE', *, *, #102, .T. ) ;
+#202 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#203 = ADVANCED_FACE ( 'NONE', ( #48 ), #805, .F. ) ;
+#204 = LINE ( 'NONE', #823, #491 ) ;
+#205 = DIRECTION ( 'NONE',  ( 0.7071067811865536800, 0.7071067811865413600, 0.0000000000000000000 ) ) ;
+#206 = VERTEX_POINT ( 'NONE', #244 ) ;
+#207 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'bolt_2', ( #264, #132 ), #144 ) ;
+#208 = FILL_AREA_STYLE_COLOUR ( '', #332 ) ;
+#209 = ORIENTED_EDGE ( 'NONE', *, *, #200, .F. ) ;
+#210 =( CONVERSION_BASED_UNIT ( 'INCH', #308 ) LENGTH_UNIT ( ) NAMED_UNIT ( #549 ) );
+#211 = EDGE_CURVE ( 'NONE', #172, #458, #615, .T. ) ;
+#212 = AXIS2_PLACEMENT_3D ( 'NONE', #231, #724, #733 ) ;
+#213 = VERTEX_POINT ( 'NONE', #49 ) ;
+#214 = ORIENTED_EDGE ( 'NONE', *, *, #293, .T. ) ;
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #354, .T. ) ;
+#216 = CIRCLE ( 'NONE', #428, 0.1000000000000000200 ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #808, .F. ) ;
+#218 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#219 = LINE ( 'NONE', #789, #787 ) ;
+#220 = EDGE_CURVE ( 'NONE', #592, #708, #762, .T. ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #351, .F. ) ;
+#222 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.4499999999999999600, -0.8499999999999999800 ) ) ;
+#223 = EDGE_LOOP ( 'NONE', ( #844, #537, #887, #725 ) ) ;
+#224 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002195900, -0.1312068193214957200, -1.854405701590038100 ) ) ;
+#225 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.799999999999999800 ) ) ;
+#226 = CARTESIAN_POINT ( 'NONE',  ( -0.7500000000000001100, 0.0000000000000000000, -1.799999999999999800 ) ) ;
+#227 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#228 = LINE ( 'NONE', #119, #748 ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( 0.2981387584279082700, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#230 = ADVANCED_FACE ( 'NONE', ( #620 ), #683, .F. ) ;
+#231 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.3499999999999999800, -1.599999999999999900 ) ) ;
+#232 = AXIS2_PLACEMENT_3D ( 'NONE', #519, #452, #35 ) ;
+#233 = CARTESIAN_POINT ( 'NONE',  ( 0.5077565848741527600, -0.5499999999999999300, -1.817562210576789000 ) ) ;
+#234 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #179, #37, #525, #53, #795, #585, #876, #445, #377, #531, #108, #317, #591, #647, #233, #39, #869, #809 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.009198988753302420400, 0.01053296546211038600, 0.01186694217091835100, 0.01253393052532234000, 0.01320091887972632700, 0.01353441305692832200, 0.01386790723413031500, 0.01420140141133230700, 0.01453489558853430200 ),
+ .UNSPECIFIED. ) ;
+#235 = CARTESIAN_POINT ( 'NONE',  ( -0.5099019513592785200, -0.5500000000000000400, -1.800000000000024200 ) ) ;
+#236 = PLANE ( 'NONE',  #580 ) ;
+#237 = CARTESIAN_POINT ( 'NONE',  ( -1.040945911436902700E-015, -0.2981387584279082700, -1.899999999999999900 ) ) ;
+#238 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #15 );
+#239 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#240 = VECTOR ( 'NONE', #674, 39.37007874015748100 ) ;
+#241 = EDGE_LOOP ( 'NONE', ( #629, #796, #682, #504 ) ) ;
+#242 = AXIS2_PLACEMENT_3D ( 'NONE', #412, #414, #847 ) ;
+#243 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( -0.5099019513592785200, -0.5500000000000000400, -0.8499999999999999800 ) ) ;
+#245 = CARTESIAN_POINT ( 'NONE',  ( -0.5064914957941274400, -0.5499999999999999300, -1.821813261331050000 ) ) ;
+#246 = ORIENTED_EDGE ( 'NONE', *, *, #211, .F. ) ;
+#247 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#248 = CARTESIAN_POINT ( 'NONE',  ( 0.2981387584279082700, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#249 = CARTESIAN_POINT ( 'NONE',  ( -0.7500000000000001100, 0.0000000000000000000, -0.8499999999999999800 ) ) ;
+#250 = CARTESIAN_POINT ( 'NONE',  ( -1.040945911436902700E-015, -0.2981387584279082700, -1.899999999999999900 ) ) ;
+#251 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#252 = EDGE_CURVE ( 'NONE', #448, #4, #568, .T. ) ;
+#253 = CIRCLE ( 'NONE', #517, 0.1000000000000000100 ) ;
+#254 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#255 = EDGE_LOOP ( 'NONE', ( #609, #828, #274, #277, #761 ) ) ;
+#256 = EDGE_LOOP ( 'NONE', ( #650, #862, #793, #130, #852, #588 ) ) ;
+#257 = EDGE_CURVE ( 'NONE', #617, #97, #840, .T. ) ;
+#258 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.4499999999999999600, -1.599999999999999900 ) ) ;
+#259 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#260 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#261 = FACE_OUTER_BOUND ( 'NONE', #820, .T. ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #220, .F. ) ;
+#263 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#264 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude13', #544 ) ;
+#265 = ORIENTED_EDGE ( 'NONE', *, *, #411, .F. ) ;
+#266 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#267 = EDGE_CURVE ( 'NONE', #448, #402, #593, .T. ) ;
+#268 = ORIENTED_EDGE ( 'NONE', *, *, #824, .T. ) ;
+#269 = EDGE_LOOP ( 'NONE', ( #535, #196, #467, #792 ) ) ;
+#270 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#271 = VECTOR ( 'NONE', #528, 39.37007874015748100 ) ;
+#272 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#273 = FACE_OUTER_BOUND ( 'NONE', #370, .T. ) ;
+#274 = ORIENTED_EDGE ( 'NONE', *, *, #267, .F. ) ;
+#275 = CARTESIAN_POINT ( 'NONE',  ( 0.3464101615137755200, -0.5500000000000000400, -1.899999999999999900 ) ) ;
+#276 = ORIENTED_EDGE ( 'NONE', *, *, #854, .T. ) ;
+#277 = ORIENTED_EDGE ( 'NONE', *, *, #135, .F. ) ;
+#278 = ORIENTED_EDGE ( 'NONE', *, *, #614, .F. ) ;
+#279 = AXIS2_PLACEMENT_3D ( 'NONE', #229, #429, #495 ) ;
+#280 = VECTOR ( 'NONE', #466, 39.37007874015748100 ) ;
+#281 = ORIENTED_EDGE ( 'NONE', *, *, #730, .F. ) ;
+#282 = LINE ( 'NONE', #258, #104 ) ;
+#283 = ORIENTED_EDGE ( 'NONE', *, *, #497, .F. ) ;
+#284 = AXIS2_PLACEMENT_3D ( 'NONE', #410, #338, #676 ) ;
+#285 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#286 = VERTEX_POINT ( 'NONE', #397 ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -0.03784857839936747000, -1.868434542974142700 ) ) ;
+#288 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -0.1491897734086520500, -1.848710407252293300 ) ) ;
+#289 = CARTESIAN_POINT ( 'NONE',  ( 0.2981387584279082700, 1.707404996040164500E-017, -4.400000000000000400 ) ) ;
+#290 = VECTOR ( 'NONE', #379, 39.37007874015748100 ) ;
+#291 = ORIENTED_EDGE ( 'NONE', *, *, #808, .T. ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( -0.3750000000000000600, 4.592425496802575500E-017, -1.899999999999999900 ) ) ;
+#293 = EDGE_CURVE ( 'NONE', #427, #470, #717, .T. ) ;
+#294 = CIRCLE ( 'NONE', #166, 0.7500000000000001100 ) ;
+#295 = VERTEX_POINT ( 'NONE', #94 ) ;
+#296 = EDGE_CURVE ( 'NONE', #339, #477, #500, .T. ) ;
+#297 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#298 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002195900, -0.1708722484340309500, -1.838956874075949900 ) ) ;
+#299 = EDGE_LOOP ( 'NONE', ( #337, #209, #684, #356, #484, #640, #607, #276, #637, #126 ) ) ;
+#300 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#301 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#302 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#303 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, 0.3499999999999999800, -1.599999999999999900 ) ) ;
+#304 = EDGE_CURVE ( 'NONE', #195, #494, #816, .T. ) ;
+#305 = PLANE ( 'NONE',  #597 ) ;
+#306 = VERTEX_POINT ( 'NONE', #505 ) ;
+#307 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -4.400000000000000400 ) ) ;
+#308 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #12 );
+#309 = VECTOR ( 'NONE', #251, 39.37007874015748100 ) ;
+#310 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#311 = LINE ( 'NONE', #548, #358 ) ;
+#312 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, 0.3499999999999999800, -1.599999999999999900 ) ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( -0.7500000000000001100, 0.0000000000000000000, 3.000000000000000400 ) ) ;
+#314 = CARTESIAN_POINT ( 'NONE',  ( 0.2981387584279082700, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#315 = ORIENTED_EDGE ( 'NONE', *, *, #645, .F. ) ;
+#316 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( 0.5012200895264975500, -0.5500000000000000400, -1.834021242567034800 ) ) ;
+#318 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, 0.03785318800527047400, -1.868206204397685900 ) ) ;
+#319 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, -0.5500000000000000400, -0.8499999999999999800 ) ) ;
+#320 = EDGE_CURVE ( 'NONE', #889, #172, #294, .T. ) ;
+#321 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.1748595916680766900, -1.836713866165015800 ) ) ;
+#322 = LINE ( 'NONE', #88, #804 ) ;
+#323 = VERTEX_POINT ( 'NONE', #222 ) ;
+#324 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#325 = ADVANCED_FACE ( 'NONE', ( #78 ), #638, .T. ) ;
+#326 = VERTEX_POINT ( 'NONE', #303 ) ;
+#327 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #254, #814 ) ;
+#328 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#329 = ORIENTED_EDGE ( 'NONE', *, *, #702, .T. ) ;
+#330 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#331 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -0.2022979235396200300, -0.8499999999999999800 ) ) ;
+#332 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
+#333 = ADVANCED_FACE ( 'NONE', ( #159 ), #71, .F. ) ;
+#334 = CYLINDRICAL_SURFACE ( 'NONE', #822, 0.3750000000000000600 ) ;
+#335 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#336 = ORIENTED_EDGE ( 'NONE', *, *, #891, .F. ) ;
+#337 = ORIENTED_EDGE ( 'NONE', *, *, #798, .F. ) ;
+#338 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#339 = VERTEX_POINT ( 'NONE', #462 ) ;
+#340 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#341 = DIRECTION ( 'NONE',  ( 0.7071067811865536800, 0.7071067811865413600, 0.0000000000000000000 ) ) ;
+#342 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.7228416147400479300, -0.8499999999999999800 ) ) ;
+#343 = FACE_OUTER_BOUND ( 'NONE', #161, .T. ) ;
+#344 = LINE ( 'NONE', #877, #183 ) ;
+#345 = ORIENTED_EDGE ( 'NONE', *, *, #600, .F. ) ;
+#346 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -3.927599089795131300E-016, -1.869187347533546300 ) ) ;
+#347 = VERTEX_POINT ( 'NONE', #589 ) ;
+#348 = AXIS2_PLACEMENT_3D ( 'NONE', #124, #542, #455 ) ;
+#349 = VERTEX_POINT ( 'NONE', #524 ) ;
+#350 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#351 = EDGE_CURVE ( 'NONE', #818, #28, #375, .T. ) ;
+#352 = VERTEX_POINT ( 'NONE', #319 ) ;
+#353 = PLANE ( 'NONE',  #658 ) ;
+#354 = EDGE_CURVE ( 'NONE', #670, #28, #33, .T. ) ;
+#355 = SURFACE_STYLE_USAGE ( .BOTH. , #150 ) ;
+#356 = ORIENTED_EDGE ( 'NONE', *, *, #8, .F. ) ;
+#357 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ;
+#358 = VECTOR ( 'NONE', #202, 39.37007874015748100 ) ;
+#359 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#360 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#361 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#362 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.899999999999999900 ) ) ;
+#363 = FACE_OUTER_BOUND ( 'NONE', #223, .T. ) ;
+#364 = LINE ( 'NONE', #599, #290 ) ;
+#365 = VERTEX_POINT ( 'NONE', #190 ) ;
+#366 = EDGE_CURVE ( 'NONE', #624, #323, #228, .T. ) ;
+#367 = PRESENTATION_STYLE_ASSIGNMENT (( #444 ) ) ;
+#368 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.799999999999999800 ) ) ;
+#369 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#370 = EDGE_LOOP ( 'NONE', ( #492, #715, #283, #215, #140, #553, #532 ) ) ;
+#371 = CARTESIAN_POINT ( 'NONE',  ( 0.5099019513592785200, -0.5500000000000000400, -1.799999999999975600 ) ) ;
+#372 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.8499999999999999800 ) ) ;
+#373 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -4.876337117728552500E-016, -3.899999999999999500 ) ) ;
+#374 = LINE ( 'NONE', #134, #747 ) ;
+#375 = LINE ( 'NONE', #52, #668 ) ;
+#376 = LINE ( 'NONE', #751, #17 ) ;
+#377 = CARTESIAN_POINT ( 'NONE',  ( 0.4855985596913998700, -0.5499999999999999300, -1.855295832828469400 ) ) ;
+#378 = AXIS2_PLACEMENT_3D ( 'NONE', #362, #25, #569 ) ;
+#379 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#380 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#381 = EDGE_CURVE ( 'NONE', #286, #326, #839, .T. ) ;
+#382 = DIRECTION ( 'NONE',  ( 0.7071067811865438000, -0.7071067811865512400, 0.0000000000000000000 ) ) ;
+#383 = AXIS2_PLACEMENT_3D ( 'NONE', #482, #845, #361 ) ;
+#384 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.9000009842519686200, 0.0000000000000000000 ) ) ;
+#385 = LINE ( 'NONE', #481, #712 ) ;
+#386 = ADVANCED_FACE ( 'NONE', ( #423 ), #595, .F. ) ;
+#387 = CIRCLE ( 'NONE', #623, 0.7500000000000001100 ) ;
+#388 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#389 = ADVANCED_FACE ( 'NONE', ( #433 ), #236, .F. ) ;
+#390 = VECTOR ( 'NONE', #388, 39.37007874015748100 ) ;
+#391 = CARTESIAN_POINT ( 'NONE',  ( -1.040945911436902700E-015, -0.2981387584279082700, -4.400000000000000400 ) ) ;
+#392 = EDGE_LOOP ( 'NONE', ( #515, #485, #22, #201 ) ) ;
+#393 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#394 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 3.000000000000000400 ) ) ;
+#395 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.9000009842519686200, 0.0000000000000000000 ) ) ;
+#396 = EDGE_CURVE ( 'NONE', #172, #206, #387, .T. ) ;
+#397 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, 0.3499999999999999800, -0.8499999999999999800 ) ) ;
+#398 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#399 = CYLINDRICAL_SURFACE ( 'NONE', #41, 0.7500000000000001100 ) ;
+#400 = ORIENTED_EDGE ( 'NONE', *, *, #68, .F. ) ;
+#401 = EDGE_CURVE ( 'NONE', #349, #295, #146, .T. ) ;
+#402 = VERTEX_POINT ( 'NONE', #456 ) ;
+#403 = CARTESIAN_POINT ( 'NONE',  ( -0.6500000000000000200, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#404 = VERTEX_POINT ( 'NONE', #662 ) ;
+#405 = ADVANCED_FACE ( 'NONE', ( #829 ), #681, .T. ) ;
+#406 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.2022979235396196200, -1.800000000000040700 ) ) ;
+#407 = VECTOR ( 'NONE', #776, 39.37007874015748100 ) ;
+#408 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5500000000000000400, -0.8499999999999999800 ) ) ;
+#409 = FACE_OUTER_BOUND ( 'NONE', #426, .T. ) ;
+#410 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, 0.0000000000000000000, -1.599999999999999900 ) ) ;
+#411 = EDGE_CURVE ( 'NONE', #708, #79, #628, .T. ) ;
+#412 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 3.000000000000000400 ) ) ;
+#413 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#414 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#415 = LINE ( 'NONE', #63, #280 ) ;
+#416 = ORIENTED_EDGE ( 'NONE', *, *, #320, .F. ) ;
+#417 = SURFACE_STYLE_FILL_AREA ( #86 ) ;
+#418 = VECTOR ( 'NONE', #3, 39.37007874015748100 ) ;
+#419 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.799999999999999800 ) ) ;
+#420 = AXIS2_PLACEMENT_3D ( 'NONE', #450, #247, #664 ) ;
+#421 = EDGE_CURVE ( 'NONE', #295, #860, #885, .T. ) ;
+#422 = VECTOR ( 'NONE', #697, 39.37007874015748100 ) ;
+#423 = FACE_OUTER_BOUND ( 'NONE', #241, .T. ) ;
+#424 = FACE_OUTER_BOUND ( 'NONE', #514, .T. ) ;
+#425 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#426 = EDGE_LOOP ( 'NONE', ( #246, #416, #546, #757, #70, #471, #221, #688 ) ) ;
+#427 = VERTEX_POINT ( 'NONE', #391 ) ;
+#428 = AXIS2_PLACEMENT_3D ( 'NONE', #67, #65, #335 ) ;
+#429 = DIRECTION ( 'NONE',  ( 0.7071067811865463500, -0.7071067811865487900, 0.0000000000000000000 ) ) ;
+#430 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#431 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#432 = EDGE_CURVE ( 'NONE', #347, #79, #476, .T. ) ;
+#433 = FACE_OUTER_BOUND ( 'NONE', #438, .T. ) ;
+#434 = VECTOR ( 'NONE', #863, 39.37007874015748100 ) ;
+#435 = ORIENTED_EDGE ( 'NONE', *, *, #401, .T. ) ;
+#436 = AXIS2_PLACEMENT_3D ( 'NONE', #755, #350, #687 ) ;
+#437 = AXIS2_PLACEMENT_3D ( 'NONE', #449, #451, #382 ) ;
+#438 = EDGE_LOOP ( 'NONE', ( #864, #460, #677, #357 ) ) ;
+#439 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.1217761162330751700, -1.856796959798541600 ) ) ;
+#440 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#441 = EDGE_CURVE ( 'NONE', #477, #624, #498, .T. ) ;
+#442 = CARTESIAN_POINT ( 'NONE',  ( -0.3816589064167638100, -0.5500000000000000400, -1.898687607625505700 ) ) ;
+#443 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.7228416147400479300, -0.8499999999999999800 ) ) ;
+#444 = SURFACE_STYLE_USAGE ( .BOTH. , #583 ) ;
+#445 = CARTESIAN_POINT ( 'NONE',  ( 0.4789733598932552900, -0.5499999999999998200, -1.861311222761548300 ) ) ;
+#446 = LINE ( 'NONE', #865, #128 ) ;
+#447 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#448 = VERTEX_POINT ( 'NONE', #371 ) ;
+#449 = CARTESIAN_POINT ( 'NONE',  ( -1.040945911436902700E-015, -0.2981387584279082700, -1.899999999999999900 ) ) ;
+#450 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#451 = DIRECTION ( 'NONE',  ( -0.7071067811865512400, -0.7071067811865438000, 0.0000000000000000000 ) ) ;
+#452 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#453 = CARTESIAN_POINT ( 'NONE',  ( -0.4855523917636256300, -0.5499999999999999300, -1.855338578217506300 ) ) ;
+#454 = ADVANCED_FACE ( 'NONE', ( #512 ), #665, .T. ) ;
+#455 = DIRECTION ( 'NONE',  ( -0.7071067811865438000, 0.7071067811865512400, 0.0000000000000000000 ) ) ;
+#456 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002198100, -0.2022979235396205900, -1.799999999999999800 ) ) ;
+#457 = LINE ( 'NONE', #250, #240 ) ;
+#458 = VERTEX_POINT ( 'NONE', #226 ) ;
+#459 = CYLINDRICAL_SURFACE ( 'NONE', #242, 0.7500000000000001100 ) ;
+#460 = ORIENTED_EDGE ( 'NONE', *, *, #730, .T. ) ;
+#461 = PRODUCT ( 'bolt_2', 'bolt_2', '', ( #154 ) ) ;
+#462 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.7228416147400479300, -1.599999999999999900 ) ) ;
+#463 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.7228416147400479300, 3.000000000000000400 ) ) ;
+#464 = ORIENTED_EDGE ( 'NONE', *, *, #611, .F. ) ;
+#465 = ADVANCED_FACE ( 'NONE', ( #859 ), #334, .T. ) ;
+#466 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#467 = ORIENTED_EDGE ( 'NONE', *, *, #252, .F. ) ;
+#468 = AXIS2_PLACEMENT_3D ( 'NONE', #307, #101, #239 ) ;
+#469 = CIRCLE ( 'NONE', #654, 0.1000000000000000200 ) ;
+#470 = VERTEX_POINT ( 'NONE', #577 ) ;
+#471 = ORIENTED_EDGE ( 'NONE', *, *, #115, .T. ) ;
+#472 = EDGE_CURVE ( 'NONE', #480, #825, #899, .T. ) ;
+#473 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, -0.5500000000000000400, -1.599999999999999900 ) ) ;
+#474 = AXIS2_PLACEMENT_3D ( 'NONE', #419, #360, #489 ) ;
+#475 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, -0.5500000000000000400, -1.599999999999999900 ) ) ;
+#476 = LINE ( 'NONE', #834, #815 ) ;
+#477 = VERTEX_POINT ( 'NONE', #499 ) ;
+#478 = AXIS2_PLACEMENT_3D ( 'NONE', #72, #547, #272 ) ;
+#479 = VECTOR ( 'NONE', #58, 39.37007874015748100 ) ;
+#480 = VERTEX_POINT ( 'NONE', #21 ) ;
+#481 = CARTESIAN_POINT ( 'NONE',  ( -0.2981387584279082700, 2.081891822873805300E-015, -1.899999999999999900 ) ) ;
+#482 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.9000009842519686200, -0.8499999999999999800 ) ) ;
+#483 = VERTEX_POINT ( 'NONE', #292 ) ;
+#484 = ORIENTED_EDGE ( 'NONE', *, *, #135, .T. ) ;
+#485 = ORIENTED_EDGE ( 'NONE', *, *, #824, .F. ) ;
+#486 = AXIS2_PLACEMENT_3D ( 'NONE', #163, #297, #521 ) ;
+#487 = EDGE_CURVE ( 'NONE', #306, #80, #446, .T. ) ;
+#488 = ORIENTED_EDGE ( 'NONE', *, *, #745, .F. ) ;
+#489 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#490 = FACE_OUTER_BOUND ( 'NONE', #392, .T. ) ;
+#491 = VECTOR ( 'NONE', #672, 39.37007874015748100 ) ;
+#492 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ;
+#493 = ORIENTED_EDGE ( 'NONE', *, *, #304, .F. ) ;
+#494 = VERTEX_POINT ( 'NONE', #790 ) ;
+#495 = DIRECTION ( 'NONE',  ( 0.7071067811865486800, 0.7071067811865462400, 0.0000000000000000000 ) ) ;
+#496 = CARTESIAN_POINT ( 'NONE',  ( 0.5099019513592785200, -0.5500000000000000400, -1.899999999999999900 ) ) ;
+#497 = EDGE_CURVE ( 'NONE', #670, #4, #739, .T. ) ;
+#498 = LINE ( 'NONE', #155, #407 ) ;
+#499 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.7228416147400481600, -1.599999999999999900 ) ) ;
+#500 = CIRCLE ( 'NONE', #84, 0.7500000000000001100 ) ;
+#501 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.599999999999999900 ) ) ;
+#502 = ORIENTED_EDGE ( 'NONE', *, *, #656, .T. ) ;
+#503 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.899999999999999900 ) ) ;
+#504 = ORIENTED_EDGE ( 'NONE', *, *, #771, .F. ) ;
+#505 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, -0.5500000000000000400, -0.8499999999999999800 ) ) ;
+#506 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ;
+#507 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002198100, -0.1828877594030450800, -1.831382222158938900 ) ) ;
+#508 = ADVANCED_FACE ( 'NONE', ( #261 ), #92, .F. ) ;
+#509 = ORIENTED_EDGE ( 'NONE', *, *, #87, .F. ) ;
+#510 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -3.927599089795131300E-016, -1.869187347533546300 ) ) ;
+#511 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#512 = FACE_OUTER_BOUND ( 'NONE', #255, .T. ) ;
+#513 = CARTESIAN_POINT ( 'NONE',  ( -0.4328121991680995400, -0.5500000000000000400, -1.886881864980408000 ) ) ;
+#514 = EDGE_LOOP ( 'NONE', ( #559, #701, #187, #557 ) ) ;
+#515 = ORIENTED_EDGE ( 'NONE', *, *, #18, .T. ) ;
+#516 = CARTESIAN_POINT ( 'NONE',  ( -1.040945911436902700E-015, -0.2981387584279082700, -1.899999999999999900 ) ) ;
+#517 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #896, #2 ) ;
+#518 = CARTESIAN_POINT ( 'NONE',  ( -0.5094738066181653300, -0.5500000000000000400, -1.808800672268614300 ) ) ;
+#519 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -4.400000000000000400 ) ) ;
+#520 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ;
+#521 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#522 = DIRECTION ( 'NONE',  ( -0.7071067811865486800, -0.7071067811865462400, 0.0000000000000000000 ) ) ;
+#523 = AXIS2_PLACEMENT_3D ( 'NONE', #573, #301, #634 ) ;
+#524 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.4499999999999999600, -1.599999999999999900 ) ) ;
+#525 = CARTESIAN_POINT ( 'NONE',  ( 0.3815817237945192700, -0.5500000000000000400, -1.898707133716321700 ) ) ;
+#526 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, 0.04730686559329484700, -1.867610371792151300 ) ) ;
+#527 = VECTOR ( 'NONE', #810, 39.37007874015748100 ) ;
+#528 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#529 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#530 = VECTOR ( 'NONE', #156, 39.37007874015748100 ) ;
+#531 = CARTESIAN_POINT ( 'NONE',  ( 0.4940729834874347200, -0.5499999999999998200, -1.845120088015906200 ) ) ;
+#532 = ORIENTED_EDGE ( 'NONE', *, *, #76, .F. ) ;
+#533 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#534 = ADVANCED_FACE ( 'NONE', ( #91 ), #24, .T. ) ;
+#535 = ORIENTED_EDGE ( 'NONE', *, *, #752, .T. ) ;
+#536 = CARTESIAN_POINT ( 'NONE',  ( 0.6500000000000000200, 7.960204194457796700E-017, -1.799999999999999800 ) ) ;
+#537 = ORIENTED_EDGE ( 'NONE', *, *, #874, .F. ) ;
+#538 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#539 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #803 ), #631 ) ;
+#540 = EDGE_LOOP ( 'NONE', ( #700, #151, #502, #113 ) ) ;
+#541 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #430 );
+#542 = DIRECTION ( 'NONE',  ( 0.7071067811865512400, 0.7071067811865438000, -0.0000000000000000000 ) ) ;
+#543 = EDGE_CURVE ( 'NONE', #306, #860, #703, .T. ) ;
+#544 = CLOSED_SHELL ( 'NONE', ( #465, #405, #61, #121, #56, #50, #791, #230, #726, #454, #754, #7, #333, #821, #534, #325, #604, #661, #892, #203, #508, #812, #191, #389, #386, #59 ) ) ;
+#545 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5500000000000000400, -1.599999999999999900 ) ) ;
+#546 = ORIENTED_EDGE ( 'NONE', *, *, #771, .T. ) ;
+#547 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#548 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, 0.0000000000000000000, -1.599999999999999900 ) ) ;
+#549 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#550 = SHAPE_DEFINITION_REPRESENTATION ( #626, #207 ) ;
+#551 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #602, #398 ) ;
+#552 = FACE_OUTER_BOUND ( 'NONE', #540, .T. ) ;
+#553 = ORIENTED_EDGE ( 'NONE', *, *, #366, .T. ) ;
+#554 = CIRCLE ( 'NONE', #711, 0.7500000000000001100 ) ;
+#555 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#556 = EDGE_CURVE ( 'NONE', #339, #349, #322, .T. ) ;
+#557 = ORIENTED_EDGE ( 'NONE', *, *, #200, .T. ) ;
+#558 = CARTESIAN_POINT ( 'NONE',  ( -0.3464101615137755200, -0.5500000000000000400, -1.899999999999999900 ) ) ;
+#559 = ORIENTED_EDGE ( 'NONE', *, *, #396, .F. ) ;
+#560 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#561 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#562 = LINE ( 'NONE', #663, #390 ) ;
+#563 = EDGE_LOOP ( 'NONE', ( #214, #153, #493, #329 ) ) ;
+#564 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #622, #127 ) ;
+#565 = AXIS2_PLACEMENT_3D ( 'NONE', #189, #57, #538 ) ;
+#566 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#567 = LINE ( 'NONE', #463, #714 ) ;
+#568 = LINE ( 'NONE', #496, #138 ) ;
+#569 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#570 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -4.400000000000000400 ) ) ;
+#571 = EDGE_LOOP ( 'NONE', ( #832, #770, #718, #721 ) ) ;
+#572 = STYLED_ITEM ( 'NONE', ( #43 ), #207 ) ;
+#573 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.3499999999999999800, -0.8499999999999999800 ) ) ;
+#574 = EDGE_CURVE ( 'NONE', #898, #402, #689, .T. ) ;
+#575 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.8499999999999999800 ) ) ;
+#576 = LINE ( 'NONE', #758, #773 ) ;
+#577 = CARTESIAN_POINT ( 'NONE',  ( -0.2981387584279082700, 2.081891822873805300E-015, -4.400000000000000400 ) ) ;
+#578 = AXIS2_PLACEMENT_3D ( 'NONE', #270, #136, #618 ) ;
+#579 = ORIENTED_EDGE ( 'NONE', *, *, #645, .T. ) ;
+#580 = AXIS2_PLACEMENT_3D ( 'NONE', #384, #328, #651 ) ;
+#581 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#582 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.1934360308236546000, -1.821819764590232100 ) ) ;
+#583 = SURFACE_SIDE_STYLE ('',( #417 ) ) ;
+#584 = EDGE_CURVE ( 'NONE', #97, #617, #693, .T. ) ;
+#585 = CARTESIAN_POINT ( 'NONE',  ( 0.4570206546241839000, -0.5499999999999997100, -1.876189692989757500 ) ) ;
+#586 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.2022979235396133700, -1.804820206523206000 ) ) ;
+#587 = ORIENTED_EDGE ( 'NONE', *, *, #702, .F. ) ;
+#588 = ORIENTED_EDGE ( 'NONE', *, *, #487, .T. ) ;
+#589 = CARTESIAN_POINT ( 'NONE',  ( 3.122837734310707600E-015, 0.2981387584279082700, -4.400000000000000400 ) ) ;
+#590 = VECTOR ( 'NONE', #522, 39.37007874015748900 ) ;
+#591 = CARTESIAN_POINT ( 'NONE',  ( 0.5032376159188664000, -0.5499999999999999300, -1.830015523565502900 ) ) ;
+#592 = VERTEX_POINT ( 'NONE', #107 ) ;
+#593 = CIRCLE ( 'NONE', #692, 0.7500000000000001100 ) ;
+#594 = PLANE ( 'NONE',  #468 ) ;
+#595 = PLANE ( 'NONE',  #884 ) ;
+#596 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #777 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #705, #772, #359 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#597 = AXIS2_PLACEMENT_3D ( 'NONE', #879, #310, #744 ) ;
+#598 = CARTESIAN_POINT ( 'NONE',  ( -0.5016003891428938400, -0.5500000000000001600, -1.834137019332327200 ) ) ;
+#599 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.9000009842519686200, -1.599999999999999900 ) ) ;
+#600 = EDGE_CURVE ( 'NONE', #818, #898, #81, .T. ) ;
+#601 = CARTESIAN_POINT ( 'NONE',  ( -0.5099019513592785200, -0.5500000000000000400, -1.800000000000024200 ) ) ;
+#602 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#603 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, 0.0000000000000000000, -1.599999999999999900 ) ) ;
+#604 = ADVANCED_FACE ( 'NONE', ( #649, #45 ), #594, .T. ) ;
+#605 = CIRCLE ( 'NONE', #523, 0.1000000000000000100 ) ;
+#606 = ORIENTED_EDGE ( 'NONE', *, *, #600, .T. ) ;
+#607 = ORIENTED_EDGE ( 'NONE', *, *, #633, .T. ) ;
+#608 = DIRECTION ( 'NONE',  ( 0.7071067811865438000, -0.7071067811865512400, 0.0000000000000000000 ) ) ;
+#609 = ORIENTED_EDGE ( 'NONE', *, *, #679, .F. ) ;
+#610 = CARTESIAN_POINT ( 'NONE',  ( 0.2999999999999999900, 0.0000000000000000000, -0.8499999999999999800 ) ) ;
+#611 = EDGE_CURVE ( 'NONE', #819, #764, #636, .T. ) ;
+#612 = VECTOR ( 'NONE', #669, 39.37007874015748900 ) ;
+#613 = PLANE ( 'NONE',  #16 ) ;
+#614 = EDGE_CURVE ( 'NONE', #477, #95, #364, .T. ) ;
+#615 = LINE ( 'NONE', #313, #62 ) ;
+#616 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #601, #110, #518, #737, #245, #598, #731, #453, #188, #881, #655, #660, #513, #184, #666, #442, #174, #105 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.01453489558853430200, 0.01486879139821883700, 0.01520268720790337300, 0.01587047882727242500, 0.01653827044664147800, 0.01720606206601052800, 0.01787385368537958200, 0.01854164530474863200, 0.01987722854348674500 ),
+ .UNSPECIFIED. ) ;
+#617 = VERTEX_POINT ( 'NONE', #735 ) ;
+#618 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#619 = LINE ( 'NONE', #314, #590 ) ;
+#620 = FACE_OUTER_BOUND ( 'NONE', #299, .T. ) ;
+#621 = EDGE_LOOP ( 'NONE', ( #506, #265, #262, #268 ) ) ;
+#622 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #461, .NOT_KNOWN. ) ;
+#623 = AXIS2_PLACEMENT_3D ( 'NONE', #46, #380, #181 ) ;
+#624 = VERTEX_POINT ( 'NONE', #443 ) ;
+#625 = EDGE_CURVE ( 'NONE', #708, #195, #619, .T. ) ;
+#626 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #564 ) ;
+#627 = VECTOR ( 'NONE', #833, 39.37007874015748100 ) ;
+#628 = LINE ( 'NONE', #248, #9 ) ;
+#629 = ORIENTED_EDGE ( 'NONE', *, *, #671, .T. ) ;
+#630 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, -0.5500000000000000400, -1.599999999999999900 ) ) ;
+#631 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #853 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #32, #90, #36 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#632 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -3.927599089795131300E-016, -1.869187347533546300 ) ) ;
+#633 = EDGE_CURVE ( 'NONE', #4, #352, #82, .T. ) ;
+#634 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#635 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#636 = CIRCLE ( 'NONE', #420, 0.6500000000000000200 ) ;
+#637 = ORIENTED_EDGE ( 'NONE', *, *, #783, .F. ) ;
+#638 = PLANE ( 'NONE',  #743 ) ;
+#639 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#640 = ORIENTED_EDGE ( 'NONE', *, *, #252, .T. ) ;
+#641 = VERTEX_POINT ( 'NONE', #235 ) ;
+#642 = DIRECTION ( 'NONE',  ( 6.752041607409858700E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#643 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#644 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.1489962506616770400, -1.848782137347961200 ) ) ;
+#645 = EDGE_CURVE ( 'NONE', #326, #95, #253, .T. ) ;
+#646 = EDGE_LOOP ( 'NONE', ( #894, #895, #281, #315 ) ) ;
+#647 = CARTESIAN_POINT ( 'NONE',  ( 0.5065017674573595300, -0.5500000000000000400, -1.821783658221122200 ) ) ;
+#648 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.1866322009559920900, -1.828482353092196500 ) ) ;
+#649 = FACE_BOUND ( 'NONE', #34, .T. ) ;
+#650 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ;
+#651 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#652 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #111, #749 ) ;
+#653 = LINE ( 'NONE', #198, #418 ) ;
+#654 = AXIS2_PLACEMENT_3D ( 'NONE', #536, #54, #897 ) ;
+#655 = CARTESIAN_POINT ( 'NONE',  ( -0.4570617769637175800, -0.5500000000000000400, -1.876168305421088500 ) ) ;
+#656 = EDGE_CURVE ( 'NONE', #764, #480, #157, .T. ) ;
+#657 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, 0.009550263408088371900, -1.869187347533550500 ) ) ;
+#658 = AXIS2_PLACEMENT_3D ( 'NONE', #837, #843, #561 ) ;
+#659 = ORIENTED_EDGE ( 'NONE', *, *, #679, .T. ) ;
+#660 = CARTESIAN_POINT ( 'NONE',  ( -0.4411578441149121000, -0.5500000000000001600, -1.883726369167517900 ) ) ;
+#661 = ADVANCED_FACE ( 'NONE', ( #850 ), #186, .F. ) ;
+#662 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.4499999999999999000, -0.8499999999999999800 ) ) ;
+#663 = CARTESIAN_POINT ( 'NONE',  ( 0.3750000000000000600, 0.0000000000000000000, -3.899999999999999900 ) ) ;
+#664 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#665 = TOROIDAL_SURFACE ( 'NONE', #698, 0.6500000000000000200, 0.1000000000000000100 ) ;
+#666 = CARTESIAN_POINT ( 'NONE',  ( -0.4074930750958468100, -0.5500000000000000400, -1.894019455464229300 ) ) ;
+#667 = EDGE_LOOP ( 'NONE', ( #509, #520, #117, #291 ) ) ;
+#668 = VECTOR ( 'NONE', #393, 39.37007874015748100 ) ;
+#669 = DIRECTION ( 'NONE',  ( -0.7071067811865486800, -0.7071067811865462400, 0.0000000000000000000 ) ) ;
+#670 = VERTEX_POINT ( 'NONE', #331 ) ;
+#671 = EDGE_CURVE ( 'NONE', #889, #404, #344, .T. ) ;
+#672 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#673 = ORIENTED_EDGE ( 'NONE', *, *, #304, .T. ) ;
+#674 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#675 = AXIS2_PLACEMENT_3D ( 'NONE', #503, #27, #857 ) ;
+#676 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#677 = ORIENTED_EDGE ( 'NONE', *, *, #366, .F. ) ;
+#678 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#679 = EDGE_CURVE ( 'NONE', #898, #480, #469, .T. ) ;
+#680 = CIRCLE ( 'NONE', #551, 0.7500000000000001100 ) ;
+#681 = TOROIDAL_SURFACE ( 'NONE', #118, 0.6500000000000000200, 0.1000000000000000100 ) ;
+#682 = ORIENTED_EDGE ( 'NONE', *, *, #556, .F. ) ;
+#683 = PLANE ( 'NONE',  #145 ) ;
+#684 = ORIENTED_EDGE ( 'NONE', *, *, #162, .T. ) ;
+#685 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#686 = ORIENTED_EDGE ( 'NONE', *, *, #487, .F. ) ;
+#687 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#688 = ORIENTED_EDGE ( 'NONE', *, *, #68, .T. ) ;
+#689 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #632, #31, #287, #716, #85, #785, #224, #288, #723, #298, #781, #507, #880, #867, #44, #40, #800, #177 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 1.139979924986162800E-017, 0.001440437601399733300, 0.002880875202799454900, 0.003601094003499316300, 0.004321312804199177600, 0.004681422204549107900, 0.005041531604899038100, 0.005401641005248969200, 0.005761750405598899500 ),
+ .UNSPECIFIED. ) ;
+#690 = PLANE ( 'NONE',  #178 ) ;
+#691 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #572 ) ) ;
+#692 = AXIS2_PLACEMENT_3D ( 'NONE', #225, #175, #98 ) ;
+#693 = CIRCLE ( 'NONE', #232, 0.3750000000000000600 ) ;
+#694 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#695 = EDGE_CURVE ( 'NONE', #79, #427, #112, .T. ) ;
+#696 = ORIENTED_EDGE ( 'NONE', *, *, #354, .F. ) ;
+#697 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#698 = AXIS2_PLACEMENT_3D ( 'NONE', #368, #218, #96 ) ;
+#699 = ORIENTED_EDGE ( 'NONE', *, *, #574, .F. ) ;
+#700 = ORIENTED_EDGE ( 'NONE', *, *, #8, .T. ) ;
+#701 = ORIENTED_EDGE ( 'NONE', *, *, #211, .T. ) ;
+#702 = EDGE_CURVE ( 'NONE', #195, #427, #457, .T. ) ;
+#703 = LINE ( 'NONE', #630, #137 ) ;
+#704 = EDGE_LOOP ( 'NONE', ( #106, #799, #851, #769 ) ) ;
+#705 =( CONVERSION_BASED_UNIT ( 'INCH', #238 ) LENGTH_UNIT ( ) NAMED_UNIT ( #259 ) );
+#706 = ORIENTED_EDGE ( 'NONE', *, *, #296, .F. ) ;
+#707 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #572 ), #596 ) ;
+#708 = VERTEX_POINT ( 'NONE', #192 ) ;
+#709 = EDGE_CURVE ( 'NONE', #80, #404, #872, .T. ) ;
+#710 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#711 = AXIS2_PLACEMENT_3D ( 'NONE', #713, #581, #643 ) ;
+#712 = VECTOR ( 'NONE', #205, 39.37007874015748100 ) ;
+#713 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.799999999999999800 ) ) ;
+#714 = VECTOR ( 'NONE', #888, 39.37007874015748100 ) ;
+#715 = ORIENTED_EDGE ( 'NONE', *, *, #633, .F. ) ;
+#716 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, -0.07551730900656092300, -1.865150414609423100 ) ) ;
+#717 = LINE ( 'NONE', #817, #530 ) ;
+#718 = ORIENTED_EDGE ( 'NONE', *, *, #47, .T. ) ;
+#719 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 3.000000000000000400 ) ) ;
+#720 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#721 = ORIENTED_EDGE ( 'NONE', *, *, #854, .F. ) ;
+#722 = CARTESIAN_POINT ( 'NONE',  ( 0.1999999999999999600, 0.4499999999999999600, -1.599999999999999900 ) ) ;
+#723 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -0.1581092363666344000, -1.845324761628359900 ) ) ;
+#724 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#725 = ORIENTED_EDGE ( 'NONE', *, *, #782, .T. ) ;
+#726 = ADVANCED_FACE ( 'NONE', ( #77 ), #774, .T. ) ;
+#727 = EDGE_LOOP ( 'NONE', ( #148, #806, #464, #775 ) ) ;
+#728 = FACE_OUTER_BOUND ( 'NONE', #75, .T. ) ;
+#729 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.1309140808625922100, -1.854487688092702100 ) ) ;
+#730 = EDGE_CURVE ( 'NONE', #95, #323, #282, .T. ) ;
+#731 = CARTESIAN_POINT ( 'NONE',  ( -0.4968324046485930200, -0.5500000000000000400, -1.841819253073093900 ) ) ;
+#732 = ORIENTED_EDGE ( 'NONE', *, *, #695, .F. ) ;
+#733 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#734 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#735 = CARTESIAN_POINT ( 'NONE',  ( -0.3750000000000000600, 4.592425496802575500E-017, -4.400000000000000400 ) ) ;
+#736 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#737 = CARTESIAN_POINT ( 'NONE',  ( -0.5077724180164698800, -0.5500000000000000400, -1.817506464332777600 ) ) ;
+#738 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, 0.1965069893295138800, -1.818019044147895800 ) ) ;
+#739 = CIRCLE ( 'NONE', #868, 0.7500000000000001100 ) ;
+#740 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ;
+#741 = AXIS2_PLACEMENT_3D ( 'NONE', #763, #835, #74 ) ;
+#742 = VECTOR ( 'NONE', #608, 39.37007874015748100 ) ;
+#743 = AXIS2_PLACEMENT_3D ( 'NONE', #373, #168, #642 ) ;
+#744 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#745 = EDGE_CURVE ( 'NONE', #458, #764, #216, .T. ) ;
+#746 = ORIENTED_EDGE ( 'NONE', *, *, #695, .T. ) ;
+#747 = VECTOR ( 'NONE', #413, 39.37007874015748100 ) ;
+#748 = VECTOR ( 'NONE', #324, 39.37007874015748100 ) ;
+#749 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#750 = ORIENTED_EDGE ( 'NONE', *, *, #293, .F. ) ;
+#751 = CARTESIAN_POINT ( 'NONE',  ( -0.2981387584279082700, 2.081891822873805300E-015, -4.400000000000000400 ) ) ;
+#752 = EDGE_CURVE ( 'NONE', #402, #670, #204, .T. ) ;
+#753 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#754 = ADVANCED_FACE ( 'NONE', ( #552, #760 ), #893, .T. ) ;
+#755 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.3499999999999998700, -1.599999999999999900 ) ) ;
+#756 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #210, 'distance_accuracy_value', 'NONE');
+#757 = ORIENTED_EDGE ( 'NONE', *, *, #296, .T. ) ;
+#758 = CARTESIAN_POINT ( 'NONE',  ( 3.122837734310707600E-015, 0.2981387584279082700, -1.899999999999999900 ) ) ;
+#759 = EDGE_CURVE ( 'NONE', #458, #641, #680, .T. ) ;
+#760 = FACE_BOUND ( 'NONE', #89, .T. ) ;
+#761 = ORIENTED_EDGE ( 'NONE', *, *, #472, .F. ) ;
+#762 = LINE ( 'NONE', #886, #742 ) ;
+#763 = CARTESIAN_POINT ( 'NONE',  ( -0.2981387584279082700, 2.081891822873805300E-015, -1.899999999999999900 ) ) ;
+#764 = VERTEX_POINT ( 'NONE', #403 ) ;
+#765 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#766 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#767 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#768 = VECTOR ( 'NONE', #369, 39.37007874015748100 ) ;
+#769 = ORIENTED_EDGE ( 'NONE', *, *, #182, .F. ) ;
+#770 = ORIENTED_EDGE ( 'NONE', *, *, #381, .T. ) ;
+#771 = EDGE_CURVE ( 'NONE', #889, #339, #567, .T. ) ;
+#772 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#773 = VECTOR ( 'NONE', #340, 39.37007874015748100 ) ;
+#774 = CYLINDRICAL_SURFACE ( 'NONE', #120, 0.7500000000000001100 ) ;
+#775 = ORIENTED_EDGE ( 'NONE', *, *, #162, .F. ) ;
+#776 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#777 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #705, 'distance_accuracy_value', 'NONE');
+#778 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #461 ) ) ;
+#779 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, 0.3499999999999998700, -0.8499999999999999800 ) ) ;
+#780 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #736, #533 ) ;
+#781 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002198100, -0.1749993270194236700, -1.836628798572682400 ) ) ;
+#782 = EDGE_CURVE ( 'NONE', #349, #404, #415, .T. ) ;
+#783 = EDGE_CURVE ( 'NONE', #860, #365, #169, .T. ) ;
+#784 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#785 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002195900, -0.1220719721968479600, -1.856726684626252900 ) ) ;
+#786 = FACE_OUTER_BOUND ( 'NONE', #66, .T. ) ;
+#787 = VECTOR ( 'NONE', #866, 39.37007874015748100 ) ;
+#788 = FACE_OUTER_BOUND ( 'NONE', #571, .T. ) ;
+#789 = CARTESIAN_POINT ( 'NONE',  ( -0.3750000000000000600, 4.592425496802575500E-017, -3.899999999999999900 ) ) ;
+#790 = CARTESIAN_POINT ( 'NONE',  ( -0.2981387584279082700, 2.081891822873805300E-015, -1.899999999999999900 ) ) ;
+#791 = ADVANCED_FACE ( 'NONE', ( #363 ), #848, .F. ) ;
+#792 = ORIENTED_EDGE ( 'NONE', *, *, #267, .T. ) ;
+#793 = ORIENTED_EDGE ( 'NONE', *, *, #320, .T. ) ;
+#794 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #639 ) ;
+#795 = CARTESIAN_POINT ( 'NONE',  ( 0.4332055788832887600, -0.5500000000000000400, -1.887501843631057300 ) ) ;
+#796 = ORIENTED_EDGE ( 'NONE', *, *, #782, .F. ) ;
+#797 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5500000000000000400, -0.8499999999999999800 ) ) ;
+#798 = EDGE_CURVE ( 'NONE', #206, #306, #883, .T. ) ;
+#799 = ORIENTED_EDGE ( 'NONE', *, *, #87, .T. ) ;
+#800 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -0.2022979235396832300, -1.804777783375042500 ) ) ;
+#801 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -4.876337117728552500E-016, -0.8499999999999999800 ) ) ;
+#802 = LINE ( 'NONE', #475, #627 ) ;
+#803 = STYLED_ITEM ( 'NONE', ( #367 ), #264 ) ;
+#804 = VECTOR ( 'NONE', #165, 39.37007874015748100 ) ;
+#805 = PLANE ( 'NONE',  #437 ) ;
+#806 = ORIENTED_EDGE ( 'NONE', *, *, #745, .T. ) ;
+#807 = CIRCLE ( 'NONE', #486, 0.7500000000000001100 ) ;
+#808 = EDGE_CURVE ( 'NONE', #213, #483, #60, .T. ) ;
+#809 = CARTESIAN_POINT ( 'NONE',  ( 0.5099019513592785200, -0.5500000000000000400, -1.799999999999975600 ) ) ;
+#810 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#811 = ORIENTED_EDGE ( 'NONE', *, *, #874, .T. ) ;
+#812 = ADVANCED_FACE ( 'NONE', ( #343 ), #613, .T. ) ;
+#813 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.07551700273295176800, -1.865149550198876000 ) ) ;
+#814 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#815 = VECTOR ( 'NONE', #160, 39.37007874015748100 ) ;
+#816 = LINE ( 'NONE', #516, #434 ) ;
+#817 = CARTESIAN_POINT ( 'NONE',  ( -1.040945911436902700E-015, -0.2981387584279082700, -4.400000000000000400 ) ) ;
+#818 = VERTEX_POINT ( 'NONE', #406 ) ;
+#819 = VERTEX_POINT ( 'NONE', #558 ) ;
+#820 = EDGE_LOOP ( 'NONE', ( #746, #587, #14, #158 ) ) ;
+#821 = ADVANCED_FACE ( 'NONE', ( #786 ), #690, .F. ) ;
+#822 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #635, #431 ) ;
+#823 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002199200, -0.2022979235396200300, -3.899999999999999500 ) ) ;
+#824 = EDGE_CURVE ( 'NONE', #592, #347, #576, .T. ) ;
+#825 = VERTEX_POINT ( 'NONE', #275 ) ;
+#826 = SURFACE_STYLE_FILL_AREA ( #849 ) ;
+#827 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5500000000000000400, -1.899999999999999900 ) ) ;
+#828 = ORIENTED_EDGE ( 'NONE', *, *, #574, .T. ) ;
+#829 = FACE_OUTER_BOUND ( 'NONE', #11, .T. ) ;
+#830 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #767 ) ;
+#831 = ORIENTED_EDGE ( 'NONE', *, *, #625, .T. ) ;
+#832 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ;
+#833 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#834 = CARTESIAN_POINT ( 'NONE',  ( 3.122837734310707600E-015, 0.2981387584279082700, -4.400000000000000400 ) ) ;
+#835 = DIRECTION ( 'NONE',  ( -0.7071067811865414700, 0.7071067811865535700, 0.0000000000000000000 ) ) ;
+#836 = AXIS2_PLACEMENT_3D ( 'NONE', #570, #858, #300 ) ;
+#837 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, 0.0000000000000000000, -1.599999999999999900 ) ) ;
+#838 = EDGE_CURVE ( 'NONE', #494, #592, #385, .T. ) ;
+#839 = LINE ( 'NONE', #312, #271 ) ;
+#840 = CIRCLE ( 'NONE', #836, 0.3750000000000000600 ) ;
+#841 = PLANE ( 'NONE',  #741 ) ;
+#842 = ORIENTED_EDGE ( 'NONE', *, *, #351, .T. ) ;
+#843 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#844 = ORIENTED_EDGE ( 'NONE', *, *, #709, .F. ) ;
+#845 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#846 = ORIENTED_EDGE ( 'NONE', *, *, #18, .F. ) ;
+#847 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#848 = CYLINDRICAL_SURFACE ( 'NONE', #436, 0.1000000000000000200 ) ;
+#849 = FILL_AREA_STYLE ('',( #208 ) ) ;
+#850 = FACE_OUTER_BOUND ( 'NONE', #621, .T. ) ;
+#851 = ORIENTED_EDGE ( 'NONE', *, *, #891, .T. ) ;
+#852 = ORIENTED_EDGE ( 'NONE', *, *, #798, .T. ) ;
+#853 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #32, 'distance_accuracy_value', 'NONE');
+#854 = EDGE_CURVE ( 'NONE', #352, #365, #802, .T. ) ;
+#855 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#856 = CARTESIAN_POINT ( 'NONE',  ( 0.3750000000000000600, 0.0000000000000000000, -4.400000000000000400 ) ) ;
+#857 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#858 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#859 = FACE_OUTER_BOUND ( 'NONE', #704, .T. ) ;
+#860 = VERTEX_POINT ( 'NONE', #473 ) ;
+#861 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#862 = ORIENTED_EDGE ( 'NONE', *, *, #671, .F. ) ;
+#863 = DIRECTION ( 'NONE',  ( -0.7071067811865438000, 0.7071067811865512400, 0.0000000000000000000 ) ) ;
+#864 = ORIENTED_EDGE ( 'NONE', *, *, #614, .T. ) ;
+#865 = CARTESIAN_POINT ( 'NONE',  ( -0.2999999999999999900, 0.0000000000000000000, -0.8499999999999999800 ) ) ;
+#866 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#867 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002198100, -0.1935102051596642700, -1.821736952998727100 ) ) ;
+#868 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #855, #425 ) ;
+#869 = CARTESIAN_POINT ( 'NONE',  ( 0.5099019513592797400, -0.5499999999999997100, -1.804410976272412800 ) ) ;
+#870 = VECTOR ( 'NONE', #766, 39.37007874015748100 ) ;
+#871 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002200400, 0.2022979235396196200, -1.800000000000040700 ) ) ;
+#872 = CIRCLE ( 'NONE', #327, 0.1000000000000000100 ) ;
+#873 = ORIENTED_EDGE ( 'NONE', *, *, #47, .F. ) ;
+#874 = EDGE_CURVE ( 'NONE', #295, #80, #374, .T. ) ;
+#875 = EDGE_LOOP ( 'NONE', ( #696, #147, #699, #345, #842 ) ) ;
+#876 = CARTESIAN_POINT ( 'NONE',  ( 0.4647594486873220000, -0.5499999999999998200, -1.871703471917145300 ) ) ;
+#877 = CARTESIAN_POINT ( 'NONE',  ( -0.1999999999999999800, 0.9000009842519686200, -0.8499999999999999800 ) ) ;
+#878 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#879 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.9000009842519686200, -0.8499999999999999800 ) ) ;
+#880 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002198100, -0.1866873769765985100, -1.828438308634935600 ) ) ;
+#881 = CARTESIAN_POINT ( 'NONE',  ( -0.4646573512503008900, -0.5500000000000000400, -1.871769617254386300 ) ) ;
+#882 = CARTESIAN_POINT ( 'NONE',  ( 0.7222018763002201500, 0.1579797301724479900, -1.845376943244810400 ) ) ;
+#883 = LINE ( 'NONE', #408, #870 ) ;
+#884 = AXIS2_PLACEMENT_3D ( 'NONE', #395, #878, #890 ) ;
+#885 = LINE ( 'NONE', #603, #309 ) ;
+#886 = CARTESIAN_POINT ( 'NONE',  ( 3.122837734310707600E-015, 0.2981387584279082700, -1.899999999999999900 ) ) ;
+#887 = ORIENTED_EDGE ( 'NONE', *, *, #401, .F. ) ;
+#888 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#889 = VERTEX_POINT ( 'NONE', #342 ) ;
+#890 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#891 = EDGE_CURVE ( 'NONE', #483, #213, #143, .T. ) ;
+#892 = ADVANCED_FACE ( 'NONE', ( #490 ), #841, .F. ) ;
+#893 = PLANE ( 'NONE',  #652 ) ;
+#894 = ORIENTED_EDGE ( 'NONE', *, *, #381, .F. ) ;
+#895 = ORIENTED_EDGE ( 'NONE', *, *, #76, .T. ) ;
+#896 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#897 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -1.224646799147353500E-016, 0.0000000000000000000 ) ) ;
+#898 = VERTEX_POINT ( 'NONE', #346 ) ;
+#899 = CIRCLE ( 'NONE', #675, 0.6500000000000000200 ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Protector_9mm_v1.0-Proteus/STEP/buffer_pin.step

@@ -0,0 +1,166 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('buffer_pin.STEP',
+    '2013-11-06T01:51:53',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = ORIENTED_EDGE ( 'NONE', *, *, #106, .F. ) ;
+#2 = STYLED_ITEM ( 'NONE', ( #19 ), #89 ) ;
+#3 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#4 = ORIENTED_EDGE ( 'NONE', *, *, #134, .T. ) ;
+#5 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #75 ) ;
+#6 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#7 = EDGE_LOOP ( 'NONE', ( #43, #67 ) ) ;
+#8 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #2 ), #120 ) ;
+#9 = PRODUCT ( 'buffer_pin', 'buffer_pin', '', ( #76 ) ) ;
+#10 = ORIENTED_EDGE ( 'NONE', *, *, #60, .T. ) ;
+#11 = CIRCLE ( 'NONE', #105, 0.09999999999999999200 ) ;
+#12 = EDGE_CURVE ( 'NONE', #92, #18, #35, .T. ) ;
+#13 = ORIENTED_EDGE ( 'NONE', *, *, #12, .T. ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#15 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#16 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#17 = AXIS2_PLACEMENT_3D ( 'NONE', #32, #3, #55 ) ;
+#18 = VERTEX_POINT ( 'NONE', #40 ) ;
+#19 = PRESENTATION_STYLE_ASSIGNMENT (( #27 ) ) ;
+#20 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#21 = AXIS2_PLACEMENT_3D ( 'NONE', #23, #141, #26 ) ;
+#22 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#23 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#24 = CARTESIAN_POINT ( 'NONE',  ( -0.09999999999999999200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#25 = FILL_AREA_STYLE_COLOUR ( '', #116 ) ;
+#26 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#27 = SURFACE_STYLE_USAGE ( .BOTH. , #121 ) ;
+#28 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #15 );
+#29 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #22, #146 ) ;
+#30 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #84, #44 ) ;
+#31 = ADVANCED_FACE ( 'NONE', ( #47 ), #52, .T. ) ;
+#32 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#33 = EDGE_LOOP ( 'NONE', ( #1, #13, #10, #80 ) ) ;
+#34 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#35 = LINE ( 'NONE', #144, #73 ) ;
+#36 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #9, .NOT_KNOWN. ) ;
+#37 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#38 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #132 ) ;
+#39 = EDGE_LOOP ( 'NONE', ( #62, #122, #4, #103 ) ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( 0.09999999999999999200, 1.224646799147353100E-017, 0.0000000000000000000 ) ) ;
+#41 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #9 ) ) ;
+#42 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #78, .T. ) ;
+#44 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#45 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#46 = SURFACE_STYLE_USAGE ( .BOTH. , #72 ) ;
+#47 = FACE_OUTER_BOUND ( 'NONE', #39, .T. ) ;
+#48 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #37 );
+#49 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #119, 'distance_accuracy_value', 'NONE');
+#50 = STYLED_ITEM ( 'NONE', ( #85 ), #96 ) ;
+#51 = CIRCLE ( 'NONE', #123, 0.09999999999999999200 ) ;
+#52 = CYLINDRICAL_SURFACE ( 'NONE', #29, 0.09999999999999999200 ) ;
+#53 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #50 ) ) ;
+#54 = CARTESIAN_POINT ( 'NONE',  ( 0.09999999999999999200, 1.224646799147353100E-017, 1.000000000000000000 ) ) ;
+#55 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#56 =( CONVERSION_BASED_UNIT ( 'INCH', #131 ) LENGTH_UNIT ( ) NAMED_UNIT ( #99 ) );
+#57 = ORIENTED_EDGE ( 'NONE', *, *, #60, .F. ) ;
+#58 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #2 ) ) ;
+#59 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#60 = EDGE_CURVE ( 'NONE', #18, #135, #51, .T. ) ;
+#61 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #50 ), #91 ) ;
+#62 = ORIENTED_EDGE ( 'NONE', *, *, #12, .F. ) ;
+#63 = FACE_OUTER_BOUND ( 'NONE', #7, .T. ) ;
+#64 = ADVANCED_FACE ( 'NONE', ( #149 ), #86, .F. ) ;
+#65 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #114, #142 ) ;
+#66 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = ORIENTED_EDGE ( 'NONE', *, *, #106, .T. ) ;
+#68 = CARTESIAN_POINT ( 'NONE',  ( -0.09999999999999999200, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#69 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#70 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #109, 'distance_accuracy_value', 'NONE');
+#71 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#72 = SURFACE_SIDE_STYLE ('',( #111 ) ) ;
+#73 = VECTOR ( 'NONE', #20, 39.37007874015748100 ) ;
+#74 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#75 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#76 = PRODUCT_CONTEXT ( 'NONE', #75, 'mechanical' ) ;
+#77 = LINE ( 'NONE', #82, #115 ) ;
+#78 = EDGE_CURVE ( 'NONE', #136, #92, #143, .T. ) ;
+#79 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#80 = ORIENTED_EDGE ( 'NONE', *, *, #134, .F. ) ;
+#81 = ADVANCED_FACE ( 'NONE', ( #118 ), #145, .T. ) ;
+#82 = CARTESIAN_POINT ( 'NONE',  ( -0.09999999999999999200, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#83 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#84 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#85 = PRESENTATION_STYLE_ASSIGNMENT (( #46 ) ) ;
+#86 = PLANE ( 'NONE',  #21 ) ;
+#87 = CIRCLE ( 'NONE', #139, 0.09999999999999999200 ) ;
+#88 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #36, #133 ) ;
+#89 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'buffer_pin', ( #96, #65 ), #102 ) ;
+#90 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#91 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #148 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #56, #126, #107 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#92 = VERTEX_POINT ( 'NONE', #54 ) ;
+#93 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #88 ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#95 = AXIS2_PLACEMENT_3D ( 'NONE', #34, #98, #110 ) ;
+#96 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #127 ) ;
+#97 = FILL_AREA_STYLE_COLOUR ( '', #90 ) ;
+#98 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#99 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#100 = ORIENTED_EDGE ( 'NONE', *, *, #147, .F. ) ;
+#101 = FILL_AREA_STYLE ('',( #25 ) ) ;
+#102 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #70 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #109, #59, #113 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#103 = ORIENTED_EDGE ( 'NONE', *, *, #147, .T. ) ;
+#104 = EDGE_LOOP ( 'NONE', ( #100, #57 ) ) ;
+#105 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #42, #83 ) ;
+#106 = EDGE_CURVE ( 'NONE', #92, #136, #11, .T. ) ;
+#107 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#108 = PLANE ( 'NONE',  #17 ) ;
+#109 =( CONVERSION_BASED_UNIT ( 'INCH', #28 ) LENGTH_UNIT ( ) NAMED_UNIT ( #74 ) );
+#110 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#111 = SURFACE_STYLE_FILL_AREA ( #117 ) ;
+#112 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#113 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#114 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#115 = VECTOR ( 'NONE', #69, 39.37007874015748100 ) ;
+#116 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#117 = FILL_AREA_STYLE ('',( #97 ) ) ;
+#118 = FACE_OUTER_BOUND ( 'NONE', #33, .T. ) ;
+#119 =( CONVERSION_BASED_UNIT ( 'INCH', #48 ) LENGTH_UNIT ( ) NAMED_UNIT ( #71 ) );
+#120 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #49 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #119, #112, #6 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#121 = SURFACE_SIDE_STYLE ('',( #124 ) ) ;
+#122 = ORIENTED_EDGE ( 'NONE', *, *, #78, .F. ) ;
+#123 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #16, #66 ) ;
+#124 = SURFACE_STYLE_FILL_AREA ( #101 ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#126 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#127 = CLOSED_SHELL ( 'NONE', ( #81, #31, #137, #64 ) ) ;
+#128 = SHAPE_DEFINITION_REPRESENTATION ( #93, #89 ) ;
+#129 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#130 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#131 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #130 );
+#132 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#133 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #132, 'design' ) ;
+#134 = EDGE_CURVE ( 'NONE', #136, #135, #77, .T. ) ;
+#135 = VERTEX_POINT ( 'NONE', #24 ) ;
+#136 = VERTEX_POINT ( 'NONE', #68 ) ;
+#137 = ADVANCED_FACE ( 'NONE', ( #63 ), #108, .T. ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#139 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #129, #140 ) ;
+#140 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#141 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#142 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#143 = CIRCLE ( 'NONE', #30, 0.09999999999999999200 ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( 0.09999999999999999200, 1.224646799147353100E-017, 1.000000000000000000 ) ) ;
+#145 = CYLINDRICAL_SURFACE ( 'NONE', #95, 0.09999999999999999200 ) ;
+#146 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#147 = EDGE_CURVE ( 'NONE', #135, #18, #87, .T. ) ;
+#148 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #56, 'distance_accuracy_value', 'NONE');
+#149 = FACE_OUTER_BOUND ( 'NONE', #104, .T. ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Protector_9mm_v1.0-Proteus/STEP/buffertube.step

@@ -0,0 +1,792 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('buffertube.STEP',
+    '2013-11-06T01:52:36',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #216, #106 ) ;
+#2 = ORIENTED_EDGE ( 'NONE', *, *, #218, .T. ) ;
+#3 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ;
+#4 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#5 = AXIS2_PLACEMENT_3D ( 'NONE', #198, #559, #305 ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103600, 0.1574803149606300000, -1.025905511811023600 ) ) ;
+#7 = VECTOR ( 'NONE', #478, 39.37007874015748100 ) ;
+#8 = ORIENTED_EDGE ( 'NONE', *, *, #212, .T. ) ;
+#9 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#10 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ;
+#11 = ORIENTED_EDGE ( 'NONE', *, *, #708, .T. ) ;
+#12 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #134 );
+#13 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#15 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, -0.6999999999999999600 ) ) ;
+#17 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #127 );
+#18 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.0000000000000000000, -0.6940927854253994300 ) ) ;
+#19 = CIRCLE ( 'NONE', #32, 0.5999999999999998700 ) ;
+#20 = CYLINDRICAL_SURFACE ( 'NONE', #165, 0.6999999999999999600 ) ;
+#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#22 = VERTEX_POINT ( 'NONE', #707 ) ;
+#23 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #483, .F. ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606292000, 0.1574803149606300000, -0.8290551181102362400 ) ) ;
+#26 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#27 = VECTOR ( 'NONE', #41, 39.37007874015748100 ) ;
+#28 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#29 = FACE_BOUND ( 'NONE', #769, .T. ) ;
+#30 = EDGE_LOOP ( 'NONE', ( #518, #455 ) ) ;
+#31 = VERTEX_POINT ( 'NONE', #648 ) ;
+#32 = AXIS2_PLACEMENT_3D ( 'NONE', #706, #639, #47 ) ;
+#33 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.3149606299212598400, -1.034960629921259900 ) ) ;
+#34 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#35 = EDGE_CURVE ( 'NONE', #355, #22, #220, .T. ) ;
+#36 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#37 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #762, #45 ) ;
+#38 = VECTOR ( 'NONE', #303, 39.37007874015748100 ) ;
+#39 = LINE ( 'NONE', #692, #337 ) ;
+#40 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ;
+#41 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#42 = ORIENTED_EDGE ( 'NONE', *, *, #35, .T. ) ;
+#43 = AXIS2_PLACEMENT_3D ( 'NONE', #202, #740, #268 ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#45 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #452, 'design' ) ;
+#46 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #738 ) ) ;
+#47 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#48 = VECTOR ( 'NONE', #575, 39.37007874015748100 ) ;
+#49 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.299999999999999800, 0.0000000000000000000 ) ) ;
+#50 = FACE_OUTER_BOUND ( 'NONE', #62, .T. ) ;
+#51 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ;
+#52 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#53 = EDGE_CURVE ( 'NONE', #74, #282, #590, .T. ) ;
+#54 = CARTESIAN_POINT ( 'NONE',  ( 6.123233995736766000E-017, 0.0000000000000000000, 0.5000000000000000000 ) ) ;
+#55 = ADVANCED_FACE ( 'NONE', ( #50 ), #289, .T. ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, -0.5000000000000000000 ) ) ;
+#57 = CIRCLE ( 'NONE', #531, 0.5999999999999998700 ) ;
+#58 = ADVANCED_FACE ( 'NONE', ( #666 ), #599, .T. ) ;
+#59 = AXIS2_PLACEMENT_3D ( 'NONE', #340, #104, #460 ) ;
+#60 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1499999999999997700, 0.0000000000000000000 ) ) ;
+#61 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ;
+#62 = EDGE_LOOP ( 'NONE', ( #243, #759, #242, #111 ) ) ;
+#63 = VERTEX_POINT ( 'NONE', #343 ) ;
+#64 = EDGE_CURVE ( 'NONE', #331, #502, #775, .T. ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.05000000000000000300, -1.034960629921259900 ) ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( -0.3977878897357367000, 0.0000000000000000000, -0.6940927854253994300 ) ) ;
+#67 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#68 = LINE ( 'NONE', #577, #204 ) ;
+#69 = CIRCLE ( 'NONE', #616, 0.8000000000000000400 ) ;
+#70 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #369 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #371, #668, #368 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#71 = ORIENTED_EDGE ( 'NONE', *, *, #519, .T. ) ;
+#72 = VERTEX_POINT ( 'NONE', #373 ) ;
+#73 = SURFACE_STYLE_USAGE ( .BOTH. , #419 ) ;
+#74 = VERTEX_POINT ( 'NONE', #701 ) ;
+#75 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3149606299212598400, 0.0000000000000000000 ) ) ;
+#76 = FILL_AREA_STYLE_COLOUR ( '', #67 ) ;
+#77 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#78 = AXIS2_PLACEMENT_3D ( 'NONE', #317, #677, #622 ) ;
+#79 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#80 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#81 = FACE_OUTER_BOUND ( 'NONE', #495, .T. ) ;
+#82 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #445 );
+#83 = EDGE_CURVE ( 'NONE', #180, #207, #152, .T. ) ;
+#84 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#85 = VERTEX_POINT ( 'NONE', #469 ) ;
+#86 = ORIENTED_EDGE ( 'NONE', *, *, #682, .F. ) ;
+#87 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#88 = CARTESIAN_POINT ( 'NONE',  ( 0.4006474257832188200, 0.1499999999999999900, -0.6924461280224478700 ) ) ;
+#89 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#90 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#91 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#92 = CIRCLE ( 'NONE', #421, 0.6999999999999999600 ) ;
+#93 = ORIENTED_EDGE ( 'NONE', *, *, #457, .T. ) ;
+#94 = AXIS2_PLACEMENT_3D ( 'NONE', #358, #235, #482 ) ;
+#95 = VERTEX_POINT ( 'NONE', #722 ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103600, 0.1574803149606300000, -0.9274803149606298800 ) ) ;
+#97 = EDGE_CURVE ( 'NONE', #530, #154, #766, .T. ) ;
+#98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#99 = CIRCLE ( 'NONE', #593, 0.5000000000000000000 ) ;
+#100 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#101 = CIRCLE ( 'NONE', #553, 0.6999999999999999600 ) ;
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #509, .T. ) ;
+#103 = VERTEX_POINT ( 'NONE', #16 ) ;
+#104 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#105 = EDGE_CURVE ( 'NONE', #63, #628, #436, .T. ) ;
+#106 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#107 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#108 = CYLINDRICAL_SURFACE ( 'NONE', #695, 0.09842519685039365100 ) ;
+#109 = LINE ( 'NONE', #284, #598 ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( 7.960204194457794200E-017, 5.299999999999999800, -0.5999999999999998700 ) ) ;
+#111 = ORIENTED_EDGE ( 'NONE', *, *, #341, .T. ) ;
+#112 = STYLED_ITEM ( 'NONE', ( #362 ), #420 ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103600, 0.1574803149606300000, -0.8290551181102362400 ) ) ;
+#114 = ADVANCED_FACE ( 'NONE', ( #345 ), #311, .T. ) ;
+#115 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #738 ), #367 ) ;
+#116 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#117 = LINE ( 'NONE', #344, #401 ) ;
+#118 = VECTOR ( 'NONE', #734, 39.37007874015748100 ) ;
+#119 = ORIENTED_EDGE ( 'NONE', *, *, #425, .T. ) ;
+#120 = VERTEX_POINT ( 'NONE', #314 ) ;
+#121 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#122 = ADVANCED_FACE ( 'NONE', ( #136, #271 ), #490, .T. ) ;
+#123 = EDGE_CURVE ( 'NONE', #357, #180, #101, .T. ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.200000000000000200, 0.0000000000000000000 ) ) ;
+#125 = CYLINDRICAL_SURFACE ( 'NONE', #658, 0.05000000000000001000 ) ;
+#126 = FACE_OUTER_BOUND ( 'NONE', #760, .T. ) ;
+#127 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#128 = LINE ( 'NONE', #18, #264 ) ;
+#129 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #334, .T. ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.1499999999999999900, -0.6924461280224478700 ) ) ;
+#132 = AXIS2_PLACEMENT_3D ( 'NONE', #49, #543, #107 ) ;
+#133 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#134 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#135 = EDGE_CURVE ( 'NONE', #508, #464, #642, .T. ) ;
+#136 = FACE_OUTER_BOUND ( 'NONE', #255, .T. ) ;
+#137 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #112 ) ) ;
+#138 = ORIENTED_EDGE ( 'NONE', *, *, #457, .F. ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #275, .T. ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.200000000000000200, 0.0000000000000000000 ) ) ;
+#141 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#142 = STYLED_ITEM ( 'NONE', ( #175 ), #558 ) ;
+#143 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#144 = FACE_OUTER_BOUND ( 'NONE', #741, .T. ) ;
+#145 = EDGE_CURVE ( 'NONE', #282, #199, #300, .T. ) ;
+#146 = FILL_AREA_STYLE ('',( #506 ) ) ;
+#147 = CIRCLE ( 'NONE', #461, 0.09842519685039365100 ) ;
+#148 = EDGE_LOOP ( 'NONE', ( #536, #619, #627, #592 ) ) ;
+#149 =( CONVERSION_BASED_UNIT ( 'INCH', #82 ) LENGTH_UNIT ( ) NAMED_UNIT ( #751 ) );
+#150 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #541, 'distance_accuracy_value', 'NONE');
+#151 = SURFACE_STYLE_USAGE ( .BOTH. , #684 ) ;
+#152 = CIRCLE ( 'NONE', #584, 0.6999999999999999600 ) ;
+#153 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#154 = VERTEX_POINT ( 'NONE', #364 ) ;
+#155 = AXIS2_PLACEMENT_3D ( 'NONE', #250, #184, #549 ) ;
+#156 = ORIENTED_EDGE ( 'NONE', *, *, #444, .T. ) ;
+#157 = PRODUCT ( 'buffertube', 'buffertube', '', ( #683 ) ) ;
+#158 = EDGE_CURVE ( 'NONE', #22, #197, #730, .T. ) ;
+#159 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.0000000000000000000, -0.6940927854253994300 ) ) ;
+#160 = VECTOR ( 'NONE', #737, 39.37007874015748100 ) ;
+#161 = ORIENTED_EDGE ( 'NONE', *, *, #693, .T. ) ;
+#162 = VERTEX_POINT ( 'NONE', #6 ) ;
+#163 = EDGE_LOOP ( 'NONE', ( #742, #40, #119, #292, #333, #354 ) ) ;
+#164 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#165 = AXIS2_PLACEMENT_3D ( 'NONE', #307, #602, #9 ) ;
+#166 = LINE ( 'NONE', #767, #632 ) ;
+#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#168 = VERTEX_POINT ( 'NONE', #612 ) ;
+#169 = ADVANCED_FACE ( 'NONE', ( #448, #564 ), #442, .F. ) ;
+#170 = ORIENTED_EDGE ( 'NONE', *, *, #249, .T. ) ;
+#171 = EDGE_CURVE ( 'NONE', #197, #168, #69, .T. ) ;
+#172 = ADVANCED_FACE ( 'NONE', ( #186 ), #20, .T. ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( 6.123233995736766000E-017, 5.000000000000000000, 0.5000000000000000000 ) ) ;
+#174 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #150 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #541, #183, #350 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#175 = PRESENTATION_STYLE_ASSIGNMENT (( #73 ) ) ;
+#176 = LINE ( 'NONE', #390, #535 ) ;
+#177 = ORIENTED_EDGE ( 'NONE', *, *, #708, .F. ) ;
+#178 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ;
+#179 = PLANE ( 'NONE',  #568 ) ;
+#180 = VERTEX_POINT ( 'NONE', #384 ) ;
+#181 = EDGE_CURVE ( 'NONE', #301, #31, #92, .T. ) ;
+#182 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#183 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#184 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#185 = LINE ( 'NONE', #468, #7 ) ;
+#186 = FACE_OUTER_BOUND ( 'NONE', #163, .T. ) ;
+#187 = EDGE_LOOP ( 'NONE', ( #466, #749, #608, #555 ) ) ;
+#188 = EDGE_LOOP ( 'NONE', ( #208, #493, #267, #322, #689 ) ) ;
+#189 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#190 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#191 = FILL_AREA_STYLE ('',( #76 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#193 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#194 = EDGE_CURVE ( 'NONE', #199, #72, #475, .T. ) ;
+#195 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#196 = FACE_OUTER_BOUND ( 'NONE', #188, .T. ) ;
+#197 = VERTEX_POINT ( 'NONE', #88 ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606292000, 0.1574803149606300000, -0.9274803149606298800 ) ) ;
+#199 = VERTEX_POINT ( 'NONE', #430 ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#201 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#202 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.200000000000000200, 0.0000000000000000000 ) ) ;
+#203 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1499999999999997700, 0.0000000000000000000 ) ) ;
+#204 = VECTOR ( 'NONE', #635, 39.37007874015748100 ) ;
+#205 = AXIS2_PLACEMENT_3D ( 'NONE', #646, #586, #770 ) ;
+#206 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#207 = VERTEX_POINT ( 'NONE', #685 ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #181, .T. ) ;
+#209 = ORIENTED_EDGE ( 'NONE', *, *, #158, .F. ) ;
+#210 = ORIENTED_EDGE ( 'NONE', *, *, #316, .F. ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.1499999999999999700, -0.6924461280224478700 ) ) ;
+#212 = EDGE_CURVE ( 'NONE', #517, #162, #147, .T. ) ;
+#213 = CIRCLE ( 'NONE', #728, 0.09842519685039365100 ) ;
+#214 = ORIENTED_EDGE ( 'NONE', *, *, #544, .T. ) ;
+#215 = AXIS2_PLACEMENT_3D ( 'NONE', #561, #620, #505 ) ;
+#216 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#217 = EDGE_LOOP ( 'NONE', ( #324, #178, #156, #339, #583 ) ) ;
+#218 = EDGE_CURVE ( 'NONE', #63, #222, #607, .T. ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.2649606299212598500, -1.034960629921259900 ) ) ;
+#220 = LINE ( 'NONE', #529, #363 ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #544, .F. ) ;
+#222 = VERTEX_POINT ( 'NONE', #327 ) ;
+#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#224 = ADVANCED_FACE ( 'NONE', ( #29, #454 ), #501, .F. ) ;
+#225 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#226 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #195, #562 ) ;
+#227 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#228 = ADVANCED_FACE ( 'NONE', ( #415 ), #253, .T. ) ;
+#229 = CIRCLE ( 'NONE', #5, 0.09842519685039365100 ) ;
+#230 = VECTOR ( 'NONE', #569, 39.37007874015748100 ) ;
+#231 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#232 = ORIENTED_EDGE ( 'NONE', *, *, #302, .T. ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ;
+#234 = EDGE_CURVE ( 'NONE', #199, #355, #572, .T. ) ;
+#235 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#236 = FILL_AREA_STYLE ('',( #470 ) ) ;
+#237 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.05000000000000000300, -1.034960629921259900 ) ) ;
+#238 = FACE_OUTER_BOUND ( 'NONE', #697, .T. ) ;
+#239 = CIRCLE ( 'NONE', #257, 0.1000000000000000200 ) ;
+#240 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#241 = VECTOR ( 'NONE', #129, 39.37007874015748100 ) ;
+#242 = ORIENTED_EDGE ( 'NONE', *, *, #471, .T. ) ;
+#243 = ORIENTED_EDGE ( 'NONE', *, *, #382, .F. ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#245 = EDGE_LOOP ( 'NONE', ( #214, #139, #476, #591, #696, #366, #528 ) ) ;
+#246 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#247 = AXIS2_PLACEMENT_3D ( 'NONE', #614, #189, #258 ) ;
+#248 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#249 = EDGE_CURVE ( 'NONE', #293, #517, #582, .T. ) ;
+#250 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.299999999999999800, 0.0000000000000000000 ) ) ;
+#251 = LINE ( 'NONE', #66, #38 ) ;
+#252 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#253 = TOROIDAL_SURFACE ( 'NONE', #43, 0.5999999999999998700, 0.1000000000000000100 ) ;
+#254 = ORIENTED_EDGE ( 'NONE', *, *, #260, .F. ) ;
+#255 = EDGE_LOOP ( 'NONE', ( #418, #71 ) ) ;
+#256 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.1499999999999999900, -0.6940927854253994300 ) ) ;
+#257 = AXIS2_PLACEMENT_3D ( 'NONE', #638, #294, #526 ) ;
+#258 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#259 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.2649606299212598500, -1.084960629921259700 ) ) ;
+#260 = EDGE_CURVE ( 'NONE', #355, #301, #426, .T. ) ;
+#261 = CIRCLE ( 'NONE', #326, 0.6999999999999999600 ) ;
+#262 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#263 = VECTOR ( 'NONE', #753, 39.37007874015748100 ) ;
+#264 = VECTOR ( 'NONE', #23, 39.37007874015748100 ) ;
+#265 = ORIENTED_EDGE ( 'NONE', *, *, #548, .T. ) ;
+#266 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#267 = ORIENTED_EDGE ( 'NONE', *, *, #398, .F. ) ;
+#268 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#269 = PLANE ( 'NONE',  #605 ) ;
+#270 = AXIS2_PLACEMENT_3D ( 'NONE', #580, #402, #225 ) ;
+#271 = FACE_BOUND ( 'NONE', #585, .T. ) ;
+#272 = EDGE_LOOP ( 'NONE', ( #395, #170, #8, #3 ) ) ;
+#273 = EDGE_LOOP ( 'NONE', ( #634, #427, #724, #346 ) ) ;
+#274 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#275 = EDGE_CURVE ( 'NONE', #527, #713, #128, .T. ) ;
+#276 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #379, 'distance_accuracy_value', 'NONE');
+#277 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606287800, 0.05000000000000000300, -1.084960629921259700 ) ) ;
+#278 = FACE_OUTER_BOUND ( 'NONE', #645, .T. ) ;
+#279 = LINE ( 'NONE', #277, #27 ) ;
+#280 = VECTOR ( 'NONE', #661, 39.37007874015748100 ) ;
+#281 = AXIS2_PLACEMENT_3D ( 'NONE', #201, #153, #623 ) ;
+#282 = VERTEX_POINT ( 'NONE', #325 ) ;
+#283 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3149606299212598400, -1.084960629921259700 ) ) ;
+#284 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.3149606299212598400, -0.6940927854253994300 ) ) ;
+#285 = AXIS2_PLACEMENT_3D ( 'NONE', #601, #422, #356 ) ;
+#286 = MANIFOLD_SOLID_BREP ( 'Fillet3', #449 ) ;
+#287 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#288 = CYLINDRICAL_SURFACE ( 'NONE', #247, 0.09842519685039365100 ) ;
+#289 = PLANE ( 'NONE',  #387 ) ;
+#290 = VECTOR ( 'NONE', #246, 39.37007874015748100 ) ;
+#291 = EDGE_CURVE ( 'NONE', #95, #308, #721, .T. ) ;
+#292 = ORIENTED_EDGE ( 'NONE', *, *, #123, .F. ) ;
+#293 = VERTEX_POINT ( 'NONE', #25 ) ;
+#294 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 1.224646799147353200E-016 ) ) ;
+#295 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#296 = ADVANCED_FACE ( 'NONE', ( #554 ), #617, .F. ) ;
+#297 = CARTESIAN_POINT ( 'NONE',  ( 8.572527594031469500E-017, 5.000000000000000000, 0.6999999999999999600 ) ) ;
+#298 = FACE_OUTER_BOUND ( 'NONE', #272, .T. ) ;
+#299 = CIRCLE ( 'NONE', #439, 0.5000000000000000000 ) ;
+#300 = LINE ( 'NONE', #552, #118 ) ;
+#301 = VERTEX_POINT ( 'NONE', #211 ) ;
+#302 = EDGE_CURVE ( 'NONE', #207, #301, #352, .T. ) ;
+#303 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#304 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #276 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #379, #672, #497 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#305 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#306 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #499 );
+#307 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#308 = VERTEX_POINT ( 'NONE', #336 ) ;
+#309 = ORIENTED_EDGE ( 'NONE', *, *, #717, .F. ) ;
+#310 = ORIENTED_EDGE ( 'NONE', *, *, #372, .T. ) ;
+#311 = PLANE ( 'NONE',  #155 ) ;
+#312 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #142 ) ) ;
+#313 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#314 = CARTESIAN_POINT ( 'NONE',  ( -0.3977878897357367000, 0.0000000000000000000, -0.6940927854253994300 ) ) ;
+#315 = CARTESIAN_POINT ( 'NONE',  ( -0.6999999999999999600, 0.1574803149606300000, -0.9274803149606298800 ) ) ;
+#316 = EDGE_CURVE ( 'NONE', #637, #508, #546, .T. ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.3149606299212598400, 0.0000000000000000000 ) ) ;
+#318 = LINE ( 'NONE', #131, #756 ) ;
+#319 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#320 = LINE ( 'NONE', #400, #263 ) ;
+#321 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#322 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ;
+#323 = ORIENTED_EDGE ( 'NONE', *, *, #533, .T. ) ;
+#324 = ORIENTED_EDGE ( 'NONE', *, *, #746, .F. ) ;
+#325 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.0000000000000000000, -1.034960629921259900 ) ) ;
+#326 = AXIS2_PLACEMENT_3D ( 'NONE', #727, #735, #319 ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.299999999999999800, 0.5999999999999998700 ) ) ;
+#328 = FACE_OUTER_BOUND ( 'NONE', #338, .T. ) ;
+#329 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#330 = VECTOR ( 'NONE', #262, 39.37007874015748100 ) ;
+#331 = VERTEX_POINT ( 'NONE', #33 ) ;
+#332 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.299999999999999800, -0.6999999999999999600 ) ) ;
+#333 = ORIENTED_EDGE ( 'NONE', *, *, #496, .T. ) ;
+#334 = EDGE_CURVE ( 'NONE', #154, #31, #68, .T. ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.0000000000000000000, -0.6924461280224478700 ) ) ;
+#336 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.2649606299212598500, -1.084960629921259700 ) ) ;
+#337 = VECTOR ( 'NONE', #392, 39.37007874015748100 ) ;
+#338 = EDGE_LOOP ( 'NONE', ( #451, #130, #715, #406, #465, #456 ) ) ;
+#339 = ORIENTED_EDGE ( 'NONE', *, *, #123, .T. ) ;
+#340 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#341 = EDGE_CURVE ( 'NONE', #72, #74, #279, .T. ) ;
+#342 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1499999999999999900, 0.0000000000000000000 ) ) ;
+#343 = CARTESIAN_POINT ( 'NONE',  ( 8.572527594031469500E-017, 5.200000000000000200, 0.6999999999999999600 ) ) ;
+#344 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.0000000000000000000, -0.6940927854253994300 ) ) ;
+#345 = FACE_OUTER_BOUND ( 'NONE', #404, .T. ) ;
+#346 = ORIENTED_EDGE ( 'NONE', *, *, #372, .F. ) ;
+#347 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.5000000000000000000 ) ) ;
+#348 = ADVANCED_FACE ( 'NONE', ( #703 ), #269, .F. ) ;
+#349 = ADVANCED_FACE ( 'NONE', ( #144 ), #394, .T. ) ;
+#350 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#351 = FACE_OUTER_BOUND ( 'NONE', #547, .T. ) ;
+#352 = LINE ( 'NONE', #563, #581 ) ;
+#353 = EDGE_CURVE ( 'NONE', #103, #628, #641, .T. ) ;
+#354 = ORIENTED_EDGE ( 'NONE', *, *, #573, .F. ) ;
+#355 = VERTEX_POINT ( 'NONE', #335 ) ;
+#356 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#357 = VERTEX_POINT ( 'NONE', #520 ) ;
+#358 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.299999999999999800, 0.0000000000000000000 ) ) ;
+#359 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#360 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#361 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#362 = PRESENTATION_STYLE_ASSIGNMENT (( #494 ) ) ;
+#363 = VECTOR ( 'NONE', #718, 39.37007874015748100 ) ;
+#364 = CARTESIAN_POINT ( 'NONE',  ( 8.572527594031472000E-017, 5.000000000000000000, 0.6999999999999999600 ) ) ;
+#365 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ;
+#366 = ORIENTED_EDGE ( 'NONE', *, *, #382, .T. ) ;
+#367 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #393 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #149, #688, #736 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#368 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#369 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #371, 'distance_accuracy_value', 'NONE');
+#370 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#371 =( CONVERSION_BASED_UNIT ( 'INCH', #306 ) LENGTH_UNIT ( ) NAMED_UNIT ( #329 ) );
+#372 = EDGE_CURVE ( 'NONE', #85, #103, #694, .T. ) ;
+#373 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.05000000000000001000, -1.084960629921259700 ) ) ;
+#374 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #157 ) ) ;
+#375 = LINE ( 'NONE', #613, #160 ) ;
+#376 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#377 = FACE_OUTER_BOUND ( 'NONE', #148, .T. ) ;
+#378 = ORIENTED_EDGE ( 'NONE', *, *, #733, .F. ) ;
+#379 =( CONVERSION_BASED_UNIT ( 'INCH', #12 ) LENGTH_UNIT ( ) NAMED_UNIT ( #389 ) );
+#380 = EDGE_LOOP ( 'NONE', ( #504, #378 ) ) ;
+#381 = AXIS2_PLACEMENT_3D ( 'NONE', #370, #434, #84 ) ;
+#382 = EDGE_CURVE ( 'NONE', #95, #74, #320, .T. ) ;
+#383 = CIRCLE ( 'NONE', #270, 0.6999999999999999600 ) ;
+#384 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3149606299212598400, -0.6999999999999999600 ) ) ;
+#385 = VECTOR ( 'NONE', #26, 39.37007874015748100 ) ;
+#386 = ORIENTED_EDGE ( 'NONE', *, *, #194, .F. ) ;
+#387 = AXIS2_PLACEMENT_3D ( 'NONE', #283, #359, #4 ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.200000000000000200, 0.5999999999999998700 ) ) ;
+#389 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#390 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.1499999999999999900, -0.6940927854253994300 ) ) ;
+#391 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #142 ), #174 ) ;
+#392 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#393 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #149, 'distance_accuracy_value', 'NONE');
+#394 = TOROIDAL_SURFACE ( 'NONE', #540, 0.5999999999999998700, 0.1000000000000000100 ) ;
+#395 = ORIENTED_EDGE ( 'NONE', *, *, #755, .F. ) ;
+#396 = PLANE ( 'NONE',  #714 ) ;
+#397 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ;
+#398 = EDGE_CURVE ( 'NONE', #168, #713, #176, .T. ) ;
+#399 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3149606299212598400, 0.0000000000000000000 ) ) ;
+#400 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606287800, 0.3149606299212598400, -1.084960629921259700 ) ) ;
+#401 = VECTOR ( 'NONE', #603, 39.37007874015748100 ) ;
+#402 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#403 = FACE_BOUND ( 'NONE', #643, .T. ) ;
+#404 = EDGE_LOOP ( 'NONE', ( #265, #93 ) ) ;
+#405 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ;
+#406 = ORIENTED_EDGE ( 'NONE', *, *, #302, .F. ) ;
+#407 = ORIENTED_EDGE ( 'NONE', *, *, #717, .T. ) ;
+#408 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606292000, 0.1574803149606300000, -1.025905511811023600 ) ) ;
+#409 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#410 = AXIS2_PLACEMENT_3D ( 'NONE', #244, #659, #360 ) ;
+#411 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, -0.6999999999999999600 ) ) ;
+#412 = ADVANCED_FACE ( 'NONE', ( #424 ), #396, .F. ) ;
+#413 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#414 = EDGE_CURVE ( 'NONE', #510, #162, #524, .T. ) ;
+#415 = FACE_OUTER_BOUND ( 'NONE', #687, .T. ) ;
+#416 = ORIENTED_EDGE ( 'NONE', *, *, #548, .F. ) ;
+#417 = ADVANCED_FACE ( 'NONE', ( #377 ), #512, .F. ) ;
+#418 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ;
+#419 = SURFACE_SIDE_STYLE ('',( #514 ) ) ;
+#420 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'buffertube', ( #286, #558, #281 ), #70 ) ;
+#421 = AXIS2_PLACEMENT_3D ( 'NONE', #203, #321, #90 ) ;
+#422 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#423 = CIRCLE ( 'NONE', #621, 0.6999999999999999600 ) ;
+#424 = FACE_OUTER_BOUND ( 'NONE', #380, .T. ) ;
+#425 = EDGE_CURVE ( 'NONE', #530, #180, #676, .T. ) ;
+#426 = LINE ( 'NONE', #745, #704 ) ;
+#427 = ORIENTED_EDGE ( 'NONE', *, *, #105, .T. ) ;
+#428 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#429 = ORIENTED_EDGE ( 'NONE', *, *, #693, .F. ) ;
+#430 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.0000000000000000000, -1.034960629921259900 ) ) ;
+#431 = EDGE_CURVE ( 'NONE', #162, #517, #757, .T. ) ;
+#432 = CARTESIAN_POINT ( 'NONE',  ( 0.4006474257832188200, 0.0000000000000000000, -0.6924461280224478700 ) ) ;
+#433 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#434 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#435 = FACE_OUTER_BOUND ( 'NONE', #273, .T. ) ;
+#436 = LINE ( 'NONE', #604, #290 ) ;
+#437 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#438 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ;
+#439 = AXIS2_PLACEMENT_3D ( 'NONE', #52, #223, #763 ) ;
+#440 = ORIENTED_EDGE ( 'NONE', *, *, #234, .T. ) ;
+#441 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#442 = PLANE ( 'NONE',  #381 ) ;
+#443 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#444 = EDGE_CURVE ( 'NONE', #502, #357, #39, .T. ) ;
+#445 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#446 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#447 = LINE ( 'NONE', #56, #739 ) ;
+#448 = FACE_OUTER_BOUND ( 'NONE', #768, .T. ) ;
+#449 = CLOSED_SHELL ( 'NONE', ( #228, #595, #58, #114, #412, #349 ) ) ;
+#450 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#451 = ORIENTED_EDGE ( 'NONE', *, *, #519, .F. ) ;
+#452 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#453 = AXIS2_PLACEMENT_3D ( 'NONE', #192, #665, #361 ) ;
+#454 = FACE_OUTER_BOUND ( 'NONE', #245, .T. ) ;
+#455 = ORIENTED_EDGE ( 'NONE', *, *, #135, .T. ) ;
+#456 = ORIENTED_EDGE ( 'NONE', *, *, #425, .F. ) ;
+#457 = EDGE_CURVE ( 'NONE', #486, #222, #19, .T. ) ;
+#458 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103600, 0.1574803149606300000, -0.9274803149606298800 ) ) ;
+#459 = ADVANCED_FACE ( 'NONE', ( #328 ), #653, .T. ) ;
+#460 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#461 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #206, #624 ) ;
+#462 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#463 = CYLINDRICAL_SURFACE ( 'NONE', #662, 0.8000000000000000400 ) ;
+#464 = VERTEX_POINT ( 'NONE', #347 ) ;
+#465 = ORIENTED_EDGE ( 'NONE', *, *, #83, .F. ) ;
+#466 = ORIENTED_EDGE ( 'NONE', *, *, #483, .T. ) ;
+#467 = AXIS2_PLACEMENT_3D ( 'NONE', #65, #488, #409 ) ;
+#468 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#469 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.200000000000000200, -0.6999999999999999600 ) ) ;
+#470 = FILL_AREA_STYLE_COLOUR ( '', #91 ) ;
+#471 = EDGE_CURVE ( 'NONE', #308, #72, #166, .T. ) ;
+#472 = AXIS2_PLACEMENT_3D ( 'NONE', #681, #675, #13 ) ;
+#473 = SHAPE_DEFINITION_REPRESENTATION ( #487, #420 ) ;
+#474 = ADVANCED_FACE ( 'NONE', ( #196 ), #588, .F. ) ;
+#475 = CIRCLE ( 'NONE', #215, 0.05000000000000001000 ) ;
+#476 = ORIENTED_EDGE ( 'NONE', *, *, #496, .F. ) ;
+#477 = ORIENTED_EDGE ( 'NONE', *, *, #560, .T. ) ;
+#478 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#479 = ADVANCED_FACE ( 'NONE', ( #126, #403 ), #761, .T. ) ;
+#480 = AXIS2_PLACEMENT_3D ( 'NONE', #428, #484, #542 ) ;
+#481 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#482 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#483 = EDGE_CURVE ( 'NONE', #609, #637, #299, .T. ) ;
+#484 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#485 = ORIENTED_EDGE ( 'NONE', *, *, #611, .F. ) ;
+#486 = VERTEX_POINT ( 'NONE', #110 ) ;
+#487 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #37 ) ;
+#488 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#489 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#490 = PLANE ( 'NONE',  #752 ) ;
+#491 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#492 = PRESENTATION_STYLE_ASSIGNMENT (( #151 ) ) ;
+#493 = ORIENTED_EDGE ( 'NONE', *, *, #573, .T. ) ;
+#494 = SURFACE_STYLE_USAGE ( .BOTH. , #610 ) ;
+#495 = EDGE_LOOP ( 'NONE', ( #51, #209, #566, #538 ) ) ;
+#496 = EDGE_CURVE ( 'NONE', #357, #713, #109, .T. ) ;
+#497 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#498 = CIRCLE ( 'NONE', #578, 0.6999999999999999600 ) ;
+#499 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#500 = VECTOR ( 'NONE', #274, 39.37007874015748100 ) ;
+#501 = PLANE ( 'NONE',  #78 ) ;
+#502 = VERTEX_POINT ( 'NONE', #522 ) ;
+#503 = ORIENTED_EDGE ( 'NONE', *, *, #158, .T. ) ;
+#504 = ORIENTED_EDGE ( 'NONE', *, *, #353, .F. ) ;
+#505 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#506 = FILL_AREA_STYLE_COLOUR ( '', #758 ) ;
+#507 = FACE_OUTER_BOUND ( 'NONE', #557, .T. ) ;
+#508 = VERTEX_POINT ( 'NONE', #54 ) ;
+#509 = EDGE_CURVE ( 'NONE', #609, #464, #447, .T. ) ;
+#510 = VERTEX_POINT ( 'NONE', #408 ) ;
+#511 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ;
+#512 = PLANE ( 'NONE',  #1 ) ;
+#513 = AXIS2_PLACEMENT_3D ( 'NONE', #237, #489, #660 ) ;
+#514 = SURFACE_STYLE_FILL_AREA ( #236 ) ;
+#515 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#516 = VECTOR ( 'NONE', #450, 39.37007874015748100 ) ;
+#517 = VERTEX_POINT ( 'NONE', #113 ) ;
+#518 = ORIENTED_EDGE ( 'NONE', *, *, #625, .T. ) ;
+#519 = EDGE_CURVE ( 'NONE', #154, #530, #383, .T. ) ;
+#520 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.3149606299212601200, -0.6940927854253994300 ) ) ;
+#521 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606287800, 0.3149606299212598400, -1.034960629921259900 ) ) ;
+#522 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.3149606299212598400, -1.034960629921259900 ) ) ;
+#523 = SURFACE_STYLE_FILL_AREA ( #191 ) ;
+#524 = LINE ( 'NONE', #747, #230 ) ;
+#525 = SURFACE_STYLE_FILL_AREA ( #146 ) ;
+#526 = DIRECTION ( 'NONE',  ( 1.224646799147353500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#527 = VERTEX_POINT ( 'NONE', #710 ) ;
+#528 = ORIENTED_EDGE ( 'NONE', *, *, #53, .T. ) ;
+#529 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.0000000000000000000, -0.6924461280224478700 ) ) ;
+#530 = VERTEX_POINT ( 'NONE', #411 ) ;
+#531 = AXIS2_PLACEMENT_3D ( 'NONE', #596, #772, #720 ) ;
+#532 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1499999999999999900, 0.0000000000000000000 ) ) ;
+#533 = EDGE_CURVE ( 'NONE', #85, #486, #239, .T. ) ;
+#534 = CIRCLE ( 'NONE', #744, 0.6999999999999999600 ) ;
+#535 = VECTOR ( 'NONE', #36, 39.37007874015748100 ) ;
+#536 = ORIENTED_EDGE ( 'NONE', *, *, #398, .T. ) ;
+#537 = ADVANCED_FACE ( 'NONE', ( #507 ), #463, .T. ) ;
+#538 = ORIENTED_EDGE ( 'NONE', *, *, #260, .T. ) ;
+#539 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#540 = AXIS2_PLACEMENT_3D ( 'NONE', #626, #691, #579 ) ;
+#541 =( CONVERSION_BASED_UNIT ( 'INCH', #17 ) LENGTH_UNIT ( ) NAMED_UNIT ( #571 ) );
+#542 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#543 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#544 = EDGE_CURVE ( 'NONE', #282, #527, #185, .T. ) ;
+#545 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#546 = LINE ( 'NONE', #754, #500 ) ;
+#547 = EDGE_LOOP ( 'NONE', ( #731, #233, #656, #405 ) ) ;
+#548 = EDGE_CURVE ( 'NONE', #222, #486, #57, .T. ) ;
+#549 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#550 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #79 ) ;
+#551 = CIRCLE ( 'NONE', #285, 0.05000000000000001000 ) ;
+#552 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.0000000000000000000, -1.034960629921259900 ) ) ;
+#553 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #376, #80 ) ;
+#554 = FACE_OUTER_BOUND ( 'NONE', #187, .T. ) ;
+#555 = ORIENTED_EDGE ( 'NONE', *, *, #509, .F. ) ;
+#556 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#557 = EDGE_LOOP ( 'NONE', ( #705, #485, #503, #61 ) ) ;
+#558 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude3', #723 ) ;
+#559 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#560 = EDGE_CURVE ( 'NONE', #120, #527, #117, .T. ) ;
+#561 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.05000000000000000300, -1.034960629921259900 ) ) ;
+#562 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#563 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103000, 0.3149606299212598400, -0.6924461280224478700 ) ) ;
+#564 = FACE_BOUND ( 'NONE', #30, .T. ) ;
+#565 = ORIENTED_EDGE ( 'NONE', *, *, #353, .T. ) ;
+#566 = ORIENTED_EDGE ( 'NONE', *, *, #35, .F. ) ;
+#567 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #452 ) ;
+#568 = AXIS2_PLACEMENT_3D ( 'NONE', #606, #433, #252 ) ;
+#569 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#570 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, -0.6999999999999999600 ) ) ;
+#571 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#572 = LINE ( 'NONE', #200, #385 ) ;
+#573 = EDGE_CURVE ( 'NONE', #31, #713, #498, .T. ) ;
+#574 = ORIENTED_EDGE ( 'NONE', *, *, #212, .F. ) ;
+#575 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#576 = ORIENTED_EDGE ( 'NONE', *, *, #234, .F. ) ;
+#577 = CARTESIAN_POINT ( 'NONE',  ( 8.572527594031472000E-017, 5.000000000000000000, 0.6999999999999999600 ) ) ;
+#578 = AXIS2_PLACEMENT_3D ( 'NONE', #60, #539, #295 ) ;
+#579 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#580 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#581 = VECTOR ( 'NONE', #631, 39.37007874015748100 ) ;
+#582 = LINE ( 'NONE', #615, #330 ) ;
+#583 = ORIENTED_EDGE ( 'NONE', *, *, #83, .T. ) ;
+#584 = AXIS2_PLACEMENT_3D ( 'NONE', #75, #141, #670 ) ;
+#585 = EDGE_LOOP ( 'NONE', ( #24, #429 ) ) ;
+#586 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#587 = AXIS2_PLACEMENT_3D ( 'NONE', #673, #190, #77 ) ;
+#588 = PLANE ( 'NONE',  #630 ) ;
+#589 = ADVANCED_FACE ( 'NONE', ( #351 ), #125, .T. ) ;
+#590 = CIRCLE ( 'NONE', #467, 0.05000000000000001000 ) ;
+#591 = ORIENTED_EDGE ( 'NONE', *, *, #444, .F. ) ;
+#592 = ORIENTED_EDGE ( 'NONE', *, *, #633, .T. ) ;
+#593 = AXIS2_PLACEMENT_3D ( 'NONE', #441, #313, #21 ) ;
+#594 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#595 = ADVANCED_FACE ( 'NONE', ( #435 ), #702, .T. ) ;
+#596 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.299999999999999800, 0.0000000000000000000 ) ) ;
+#597 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#598 = VECTOR ( 'NONE', #227, 39.37007874015748100 ) ;
+#599 = CYLINDRICAL_SURFACE ( 'NONE', #132, 0.6999999999999999600 ) ;
+#600 = ORIENTED_EDGE ( 'NONE', *, *, #145, .F. ) ;
+#601 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.2649606299212598500, -1.034960629921259900 ) ) ;
+#602 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#603 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#604 = CARTESIAN_POINT ( 'NONE',  ( 8.572527594031469500E-017, 5.299999999999999800, 0.6999999999999999600 ) ) ;
+#605 = AXIS2_PLACEMENT_3D ( 'NONE', #399, #462, #698 ) ;
+#606 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.0000000000000000000, -0.6924461280224478700 ) ) ;
+#607 = CIRCLE ( 'NONE', #226, 0.1000000000000000200 ) ;
+#608 = ORIENTED_EDGE ( 'NONE', *, *, #625, .F. ) ;
+#609 = VERTEX_POINT ( 'NONE', #663 ) ;
+#610 = SURFACE_SIDE_STYLE ('',( #523 ) ) ;
+#611 = EDGE_CURVE ( 'NONE', #22, #120, #764, .T. ) ;
+#612 = CARTESIAN_POINT ( 'NONE',  ( -0.3977878897357367000, 0.1499999999999999900, -0.6940927854253994300 ) ) ;
+#613 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.3149606299212598400, -0.0000000000000000000 ) ) ;
+#614 = CARTESIAN_POINT ( 'NONE',  ( -0.6999999999999999600, 0.1574803149606300000, -0.9274803149606298800 ) ) ;
+#615 = CARTESIAN_POINT ( 'NONE',  ( -0.6999999999999999600, 0.1574803149606300000, -0.8290551181102362400 ) ) ;
+#616 = AXIS2_PLACEMENT_3D ( 'NONE', #726, #491, #133 ) ;
+#617 = CYLINDRICAL_SURFACE ( 'NONE', #699, 0.5000000000000000000 ) ;
+#618 = ORIENTED_EDGE ( 'NONE', *, *, #755, .T. ) ;
+#619 = ORIENTED_EDGE ( 'NONE', *, *, #275, .F. ) ;
+#620 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#621 = AXIS2_PLACEMENT_3D ( 'NONE', #124, #597, #143 ) ;
+#622 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#623 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#624 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#625 = EDGE_CURVE ( 'NONE', #464, #508, #674, .T. ) ;
+#626 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.200000000000000200, 0.0000000000000000000 ) ) ;
+#627 = ORIENTED_EDGE ( 'NONE', *, *, #560, .F. ) ;
+#628 = VERTEX_POINT ( 'NONE', #297 ) ;
+#629 = EDGE_LOOP ( 'NONE', ( #667, #407, #310, #565 ) ) ;
+#630 = AXIS2_PLACEMENT_3D ( 'NONE', #532, #287, #413 ) ;
+#631 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#632 = VECTOR ( 'NONE', #640, 39.37007874015748100 ) ;
+#633 = EDGE_CURVE ( 'NONE', #120, #168, #251, .T. ) ;
+#634 = ORIENTED_EDGE ( 'NONE', *, *, #682, .T. ) ;
+#635 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#636 = EDGE_LOOP ( 'NONE', ( #210, #161, #102, #657 ) ) ;
+#637 = VERTEX_POINT ( 'NONE', #173 ) ;
+#638 = CARTESIAN_POINT ( 'NONE',  ( 7.347880794884117800E-017, 5.200000000000000200, -0.5999999999999998700 ) ) ;
+#639 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#640 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#641 = CIRCLE ( 'NONE', #59, 0.6999999999999999600 ) ;
+#642 = CIRCLE ( 'NONE', #453, 0.5000000000000000000 ) ;
+#643 = EDGE_LOOP ( 'NONE', ( #438, #574 ) ) ;
+#644 = AXIS2_PLACEMENT_3D ( 'NONE', #700, #649, #481 ) ;
+#645 = EDGE_LOOP ( 'NONE', ( #655, #732, #386, #600 ) ) ;
+#646 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#647 = ADVANCED_FACE ( 'NONE', ( #711 ), #719, .F. ) ;
+#648 = CARTESIAN_POINT ( 'NONE',  ( 8.572527594031472000E-017, 0.1499999999999997700, 0.6999999999999999600 ) ) ;
+#649 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#650 = EDGE_CURVE ( 'NONE', #308, #331, #551, .T. ) ;
+#651 = ADVANCED_FACE ( 'NONE', ( #278 ), #652, .T. ) ;
+#652 = CYLINDRICAL_SURFACE ( 'NONE', #513, 0.05000000000000001000 ) ;
+#653 = CYLINDRICAL_SURFACE ( 'NONE', #205, 0.6999999999999999600 ) ;
+#654 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#655 = ORIENTED_EDGE ( 'NONE', *, *, #53, .F. ) ;
+#656 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ;
+#657 = ORIENTED_EDGE ( 'NONE', *, *, #135, .F. ) ;
+#658 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #594, #231 ) ;
+#659 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#660 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#661 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#662 = AXIS2_PLACEMENT_3D ( 'NONE', #342, #121, #164 ) ;
+#663 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, -0.5000000000000000000 ) ) ;
+#664 = VECTOR ( 'NONE', #515, 39.37007874015748100 ) ;
+#665 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#666 = FACE_OUTER_BOUND ( 'NONE', #629, .T. ) ;
+#667 = ORIENTED_EDGE ( 'NONE', *, *, #105, .F. ) ;
+#668 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#669 = EDGE_CURVE ( 'NONE', #301, #197, #318, .T. ) ;
+#670 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#671 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3149606299212598400, 0.0000000000000000000 ) ) ;
+#672 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#673 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#674 = CIRCLE ( 'NONE', #480, 0.5000000000000000000 ) ;
+#675 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#676 = LINE ( 'NONE', #570, #664 ) ;
+#677 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#678 = ORIENTED_EDGE ( 'NONE', *, *, #746, .T. ) ;
+#679 = ORIENTED_EDGE ( 'NONE', *, *, #533, .F. ) ;
+#680 = ORIENTED_EDGE ( 'NONE', *, *, #218, .F. ) ;
+#681 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.2649606299212598500, -1.034960629921259900 ) ) ;
+#682 = EDGE_CURVE ( 'NONE', #85, #63, #423, .T. ) ;
+#683 = PRODUCT_CONTEXT ( 'NONE', #79, 'mechanical' ) ;
+#684 = SURFACE_SIDE_STYLE ('',( #525 ) ) ;
+#685 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103000, 0.3149606299212601200, -0.6924461280224478700 ) ) ;
+#686 = ORIENTED_EDGE ( 'NONE', *, *, #471, .F. ) ;
+#687 = EDGE_LOOP ( 'NONE', ( #86, #323, #416, #680 ) ) ;
+#688 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#689 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ;
+#690 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #654, #716 ) ;
+#691 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#692 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.3149606299212598400, 0.0000000000000000000 ) ) ;
+#693 = EDGE_CURVE ( 'NONE', #637, #609, #99, .T. ) ;
+#694 = LINE ( 'NONE', #332, #48 ) ;
+#695 = AXIS2_PLACEMENT_3D ( 'NONE', #315, #443, #87 ) ;
+#696 = ORIENTED_EDGE ( 'NONE', *, *, #771, .T. ) ;
+#697 = EDGE_LOOP ( 'NONE', ( #750, #177, #10, #511 ) ) ;
+#698 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#699 = AXIS2_PLACEMENT_3D ( 'NONE', #446, #266, #89 ) ;
+#700 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.3149606299212598400, 0.0000000000000000000 ) ) ;
+#701 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606287800, 0.05000000000000001000, -1.084960629921259700 ) ) ;
+#702 = CYLINDRICAL_SURFACE ( 'NONE', #94, 0.6999999999999999600 ) ;
+#703 = FACE_OUTER_BOUND ( 'NONE', #217, .T. ) ;
+#704 = VECTOR ( 'NONE', #28, 39.37007874015748100 ) ;
+#705 = ORIENTED_EDGE ( 'NONE', *, *, #633, .F. ) ;
+#706 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.299999999999999800, 0.0000000000000000000 ) ) ;
+#707 = CARTESIAN_POINT ( 'NONE',  ( 0.4006474257832188200, 0.0000000000000000000, -0.6924461280224478700 ) ) ;
+#708 = EDGE_CURVE ( 'NONE', #510, #293, #229, .T. ) ;
+#709 = ADVANCED_FACE ( 'NONE', ( #81 ), #179, .F. ) ;
+#710 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606290600, 0.0000000000000000000, -0.6940927854253994300 ) ) ;
+#711 = FACE_OUTER_BOUND ( 'NONE', #636, .T. ) ;
+#712 = ADVANCED_FACE ( 'NONE', ( #298 ), #288, .F. ) ;
+#713 = VERTEX_POINT ( 'NONE', #256 ) ;
+#714 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #98, #34 ) ;
+#715 = ORIENTED_EDGE ( 'NONE', *, *, #181, .F. ) ;
+#716 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#717 = EDGE_CURVE ( 'NONE', #63, #85, #534, .T. ) ;
+#718 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#719 = CYLINDRICAL_SURFACE ( 'NONE', #690, 0.5000000000000000000 ) ;
+#720 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#721 = LINE ( 'NONE', #259, #516 ) ;
+#722 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606287800, 0.2649606299212598500, -1.084960629921259700 ) ) ;
+#723 = CLOSED_SHELL ( 'NONE', ( #712, #296, #459, #172, #647, #122, #169, #55, #224, #479, #348, #773, #589, #651, #537, #474, #709, #417 ) ) ;
+#724 = ORIENTED_EDGE ( 'NONE', *, *, #733, .T. ) ;
+#725 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #112 ), #304 ) ;
+#726 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1499999999999999900, 0.0000000000000000000 ) ) ;
+#727 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.000000000000000000, 0.0000000000000000000 ) ) ;
+#728 = AXIS2_PLACEMENT_3D ( 'NONE', #729, #556, #193 ) ;
+#729 = CARTESIAN_POINT ( 'NONE',  ( -0.09074803149606292000, 0.1574803149606300000, -0.9274803149606298800 ) ) ;
+#730 = LINE ( 'NONE', #432, #280 ) ;
+#731 = ORIENTED_EDGE ( 'NONE', *, *, #771, .F. ) ;
+#732 = ORIENTED_EDGE ( 'NONE', *, *, #341, .F. ) ;
+#733 = EDGE_CURVE ( 'NONE', #628, #103, #261, .T. ) ;
+#734 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#735 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#736 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#737 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#738 = STYLED_ITEM ( 'NONE', ( #492 ), #286 ) ;
+#739 = VECTOR ( 'NONE', #116, 39.37007874015748100 ) ;
+#740 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#741 = EDGE_LOOP ( 'NONE', ( #679, #309, #2, #138 ) ) ;
+#742 = ORIENTED_EDGE ( 'NONE', *, *, #334, .F. ) ;
+#743 = ORIENTED_EDGE ( 'NONE', *, *, #194, .T. ) ;
+#744 = AXIS2_PLACEMENT_3D ( 'NONE', #140, #248, #15 ) ;
+#745 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.0000000000000000000, -0.6924461280224478700 ) ) ;
+#746 = EDGE_CURVE ( 'NONE', #331, #207, #375, .T. ) ;
+#747 = CARTESIAN_POINT ( 'NONE',  ( -0.6999999999999999600, 0.1574803149606300000, -1.025905511811023600 ) ) ;
+#748 = ORIENTED_EDGE ( 'NONE', *, *, #611, .T. ) ;
+#749 = ORIENTED_EDGE ( 'NONE', *, *, #316, .T. ) ;
+#750 = ORIENTED_EDGE ( 'NONE', *, *, #249, .F. ) ;
+#751 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#752 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #240, #437 ) ;
+#753 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#754 = CARTESIAN_POINT ( 'NONE',  ( 6.123233995736766000E-017, 5.000000000000000000, 0.5000000000000000000 ) ) ;
+#755 = EDGE_CURVE ( 'NONE', #293, #510, #213, .T. ) ;
+#756 = VECTOR ( 'NONE', #545, 39.37007874015748100 ) ;
+#757 = CIRCLE ( 'NONE', #765, 0.09842519685039365100 ) ;
+#758 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#759 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ;
+#760 = EDGE_LOOP ( 'NONE', ( #254, #576, #743, #686, #397, #678, #232 ) ) ;
+#761 = PLANE ( 'NONE',  #644 ) ;
+#762 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #157, .NOT_KNOWN. ) ;
+#763 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#764 = CIRCLE ( 'NONE', #410, 0.8000000000000000400 ) ;
+#765 = AXIS2_PLACEMENT_3D ( 'NONE', #458, #100, #167 ) ;
+#766 = CIRCLE ( 'NONE', #587, 0.6999999999999999600 ) ;
+#767 = CARTESIAN_POINT ( 'NONE',  ( 0.1025590551181103500, 0.3149606299212598400, -1.084960629921259700 ) ) ;
+#768 = EDGE_LOOP ( 'NONE', ( #477, #221, #365, #440, #42, #748 ) ) ;
+#769 = EDGE_LOOP ( 'NONE', ( #11, #618 ) ) ;
+#770 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#771 = EDGE_CURVE ( 'NONE', #502, #95, #774, .T. ) ;
+#772 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#773 = ADVANCED_FACE ( 'NONE', ( #238 ), #108, .F. ) ;
+#774 = CIRCLE ( 'NONE', #472, 0.05000000000000001000 ) ;
+#775 = LINE ( 'NONE', #521, #241 ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Protector_9mm_v1.0-Proteus/STEP/handle.step

@@ -0,0 +1,218 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('handle.STEP',
+    '2013-11-06T01:47:54',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ;
+#2 = AXIS2_PLACEMENT_3D ( 'NONE', #186, #98, #66 ) ;
+#3 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#4 = AXIS2_PLACEMENT_3D ( 'NONE', #88, #193, #101 ) ;
+#5 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( -0.1000000000000000200, 1.224646799147353600E-017, 0.0000000000000000000 ) ) ;
+#7 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#8 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ;
+#10 = PRODUCT_CONTEXT ( 'NONE', #197, 'mechanical' ) ;
+#11 = SURFACE_STYLE_FILL_AREA ( #16 ) ;
+#12 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #134 ) ;
+#13 = CIRCLE ( 'NONE', #71, 0.1000000000000000200 ) ;
+#14 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #73, #42 ) ;
+#15 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #136, 'distance_accuracy_value', 'NONE');
+#16 = FILL_AREA_STYLE ('',( #112 ) ) ;
+#17 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#18 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #178 );
+#19 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#20 = CARTESIAN_POINT ( 'NONE',  ( -0.1000000000000000200, 1.224646799147353600E-017, -1.309544643347171800 ) ) ;
+#21 = ORIENTED_EDGE ( 'NONE', *, *, #155, .T. ) ;
+#22 = FACE_OUTER_BOUND ( 'NONE', #97, .T. ) ;
+#23 = AXIS2_PLACEMENT_3D ( 'NONE', #145, #160, #130 ) ;
+#24 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#25 = VERTEX_POINT ( 'NONE', #99 ) ;
+#26 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#27 = EDGE_CURVE ( 'NONE', #25, #40, #55, .T. ) ;
+#28 = AXIS2_PLACEMENT_3D ( 'NONE', #121, #117, #26 ) ;
+#29 = VECTOR ( 'NONE', #195, 39.37007874015748100 ) ;
+#30 = ORIENTED_EDGE ( 'NONE', *, *, #138, .T. ) ;
+#31 = EDGE_LOOP ( 'NONE', ( #33, #89, #9, #75 ) ) ;
+#32 = AXIS2_PLACEMENT_3D ( 'NONE', #51, #163, #82 ) ;
+#33 = ORIENTED_EDGE ( 'NONE', *, *, #138, .F. ) ;
+#34 = FACE_OUTER_BOUND ( 'NONE', #57, .T. ) ;
+#35 = ADVANCED_FACE ( 'NONE', ( #34 ), #188, .F. ) ;
+#36 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#37 = LINE ( 'NONE', #119, #29 ) ;
+#38 = EDGE_CURVE ( 'NONE', #173, #126, #77, .T. ) ;
+#39 = FILL_AREA_STYLE_COLOUR ( '', #5 ) ;
+#40 = VERTEX_POINT ( 'NONE', #128 ) ;
+#41 = PLANE ( 'NONE',  #176 ) ;
+#42 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #156, .T. ) ;
+#44 = SURFACE_STYLE_FILL_AREA ( #200 ) ;
+#45 = CARTESIAN_POINT ( 'NONE',  ( -0.09999999999999978400, 1.224646799147350600E-017, -1.354772321673585900 ) ) ;
+#46 = ORIENTED_EDGE ( 'NONE', *, *, #38, .T. ) ;
+#47 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#48 = SURFACE_SIDE_STYLE ('',( #44 ) ) ;
+#49 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#50 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #19, #61 ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.399999999999999900 ) ) ;
+#52 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #148 ), #63 ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.309544643347171800 ) ) ;
+#54 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#55 = CIRCLE ( 'NONE', #2, 0.1000000000000000200 ) ;
+#56 = MANIFOLD_SOLID_BREP ( 'Revolve1', #150 ) ;
+#57 = EDGE_LOOP ( 'NONE', ( #165, #161 ) ) ;
+#58 = TOROIDAL_SURFACE ( 'NONE', #79, 0.09999999999999978400, 0.04522767832641406300 ) ;
+#59 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #154, #7 ) ;
+#60 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#61 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#62 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.354772321673585900 ) ) ;
+#63 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #15 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #136, #87, #146 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#64 = VECTOR ( 'NONE', #24, 39.37007874015748100 ) ;
+#65 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #105, #91 ) ;
+#66 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = ADVANCED_FACE ( 'NONE', ( #115 ), #103, .T. ) ;
+#68 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#69 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#70 = ORIENTED_EDGE ( 'NONE', *, *, #156, .F. ) ;
+#71 = AXIS2_PLACEMENT_3D ( 'NONE', #164, #135, #137 ) ;
+#72 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #151 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #78, #170, #8 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#73 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#74 = AXIS2_PLACEMENT_3D ( 'NONE', #68, #110, #94 ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #38, .F. ) ;
+#76 = PRESENTATION_STYLE_ASSIGNMENT (( #93 ) ) ;
+#77 = CIRCLE ( 'NONE', #23, 0.1000000000000000200 ) ;
+#78 =( CONVERSION_BASED_UNIT ( 'INCH', #18 ) LENGTH_UNIT ( ) NAMED_UNIT ( #49 ) );
+#79 = AXIS2_PLACEMENT_3D ( 'NONE', #62, #69, #174 ) ;
+#80 = EDGE_LOOP ( 'NONE', ( #43, #46 ) ) ;
+#81 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'handle', ( #56, #74 ), #72 ) ;
+#82 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#83 = ADVANCED_FACE ( 'NONE', ( #175 ), #41, .T. ) ;
+#84 = CIRCLE ( 'NONE', #4, 0.1000000000000000200 ) ;
+#85 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #179 ) ) ;
+#86 = EDGE_LOOP ( 'NONE', ( #1, #21, #168, #185 ) ) ;
+#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#88 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.399999999999999900 ) ) ;
+#89 = ORIENTED_EDGE ( 'NONE', *, *, #166, .T. ) ;
+#90 = AXIS2_PLACEMENT_3D ( 'NONE', #192, #60, #149 ) ;
+#91 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#92 = SHAPE_DEFINITION_REPRESENTATION ( #12, #81 ) ;
+#93 = SURFACE_STYLE_USAGE ( .BOTH. , #48 ) ;
+#94 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#95 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #169, #140 ) ;
+#96 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #111 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #107, #196, #47 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#97 = EDGE_LOOP ( 'NONE', ( #120, #30, #70, #201 ) ) ;
+#98 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( 0.1000000000000000200, 0.0000000000000000000, -1.399999999999999900 ) ) ;
+#100 = ADVANCED_FACE ( 'NONE', ( #177 ), #190, .T. ) ;
+#101 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#102 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #131, .NOT_KNOWN. ) ;
+#103 = CYLINDRICAL_SURFACE ( 'NONE', #65, 0.1000000000000000200 ) ;
+#104 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.354772321673585900 ) ) ;
+#105 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#106 = CARTESIAN_POINT ( 'NONE',  ( 0.1000000000000000200, 0.0000000000000000000, -1.309544643347171800 ) ) ;
+#107 =( CONVERSION_BASED_UNIT ( 'INCH', #114 ) LENGTH_UNIT ( ) NAMED_UNIT ( #129 ) );
+#108 = LINE ( 'NONE', #6, #64 ) ;
+#109 = CIRCLE ( 'NONE', #59, 0.1000000000000000200 ) ;
+#110 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#111 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #107, 'distance_accuracy_value', 'NONE');
+#112 = FILL_AREA_STYLE_COLOUR ( '', #194 ) ;
+#113 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ;
+#114 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #183 );
+#115 = FACE_OUTER_BOUND ( 'NONE', #31, .T. ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #143, .F. ) ;
+#117 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#118 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #17 );
+#119 = CARTESIAN_POINT ( 'NONE',  ( 0.1000000000000000200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#120 = ORIENTED_EDGE ( 'NONE', *, *, #143, .T. ) ;
+#121 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#122 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #179 ), #96 ) ;
+#123 = VERTEX_POINT ( 'NONE', #106 ) ;
+#124 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#125 = EDGE_CURVE ( 'NONE', #123, #126, #37, .T. ) ;
+#126 = VERTEX_POINT ( 'NONE', #133 ) ;
+#127 = VERTEX_POINT ( 'NONE', #20 ) ;
+#128 = CARTESIAN_POINT ( 'NONE',  ( -0.1000000000000000200, 1.224646799147353600E-017, -1.399999999999999900 ) ) ;
+#129 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#130 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#131 = PRODUCT ( 'handle', 'handle', '', ( #10 ) ) ;
+#132 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( 0.1000000000000000200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#134 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #102, #187 ) ;
+#135 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#136 =( CONVERSION_BASED_UNIT ( 'INCH', #118 ) LENGTH_UNIT ( ) NAMED_UNIT ( #162 ) );
+#137 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#138 = EDGE_CURVE ( 'NONE', #127, #173, #108, .T. ) ;
+#139 = PRESENTATION_STYLE_ASSIGNMENT (( #191 ) ) ;
+#140 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 1.224646799147353200E-016, 0.0000000000000000000 ) ) ;
+#141 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #124 ) ;
+#142 = CIRCLE ( 'NONE', #28, 0.1000000000000000200 ) ;
+#143 = EDGE_CURVE ( 'NONE', #123, #127, #109, .T. ) ;
+#144 = ADVANCED_FACE ( 'NONE', ( #22 ), #152, .T. ) ;
+#145 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#146 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#147 = EDGE_LOOP ( 'NONE', ( #158, #113, #116, #189 ) ) ;
+#148 = STYLED_ITEM ( 'NONE', ( #139 ), #56 ) ;
+#149 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#150 = CLOSED_SHELL ( 'NONE', ( #100, #144, #83, #67, #157, #35 ) ) ;
+#151 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #78, 'distance_accuracy_value', 'NONE');
+#152 = CYLINDRICAL_SURFACE ( 'NONE', #50, 0.1000000000000000200 ) ;
+#153 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#154 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#155 = EDGE_CURVE ( 'NONE', #40, #25, #84, .T. ) ;
+#156 = EDGE_CURVE ( 'NONE', #126, #173, #142, .T. ) ;
+#157 = ADVANCED_FACE ( 'NONE', ( #159 ), #58, .T. ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #27, .T. ) ;
+#159 = FACE_OUTER_BOUND ( 'NONE', #86, .T. ) ;
+#160 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#161 = ORIENTED_EDGE ( 'NONE', *, *, #155, .F. ) ;
+#162 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#163 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#164 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.309544643347171800 ) ) ;
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #27, .F. ) ;
+#166 = EDGE_CURVE ( 'NONE', #127, #123, #13, .T. ) ;
+#167 = CARTESIAN_POINT ( 'NONE',  ( -0.1000000000000000200, 1.224646799147353600E-017, 0.0000000000000000000 ) ) ;
+#168 = ORIENTED_EDGE ( 'NONE', *, *, #172, .T. ) ;
+#169 = DIRECTION ( 'NONE',  ( 1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#170 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#171 = SURFACE_SIDE_STYLE ('',( #11 ) ) ;
+#172 = EDGE_CURVE ( 'NONE', #25, #123, #181, .T. ) ;
+#173 = VERTEX_POINT ( 'NONE', #167 ) ;
+#174 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#175 = FACE_OUTER_BOUND ( 'NONE', #80, .T. ) ;
+#176 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #132, #36 ) ;
+#177 = FACE_OUTER_BOUND ( 'NONE', #147, .T. ) ;
+#178 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#179 = STYLED_ITEM ( 'NONE', ( #76 ), #81 ) ;
+#180 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #197 ) ;
+#181 = CIRCLE ( 'NONE', #90, 0.04522767832641406300 ) ;
+#182 = CIRCLE ( 'NONE', #95, 0.04522767832641406300 ) ;
+#183 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#184 = EDGE_CURVE ( 'NONE', #40, #127, #182, .T. ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #166, .F. ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.399999999999999900 ) ) ;
+#187 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #124, 'design' ) ;
+#188 = PLANE ( 'NONE',  #32 ) ;
+#189 = ORIENTED_EDGE ( 'NONE', *, *, #172, .F. ) ;
+#190 = TOROIDAL_SURFACE ( 'NONE', #14, 0.09999999999999978400, 0.04522767832641406300 ) ;
+#191 = SURFACE_STYLE_USAGE ( .BOTH. , #171 ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 0.09999999999999978400, 0.0000000000000000000, -1.354772321673585900 ) ) ;
+#193 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#194 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#195 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#196 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#197 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#198 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #148 ) ) ;
+#199 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #131 ) ) ;
+#200 = FILL_AREA_STYLE ('',( #39 ) ) ;
+#201 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Protector_9mm_v1.0-Proteus/STEP/magplate.step

@@ -0,0 +1,828 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('magplate.STEP',
+    '2013-11-06T01:46:48',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = PLANE ( 'NONE',  #263 ) ;
+#2 = EDGE_CURVE ( 'NONE', #683, #36, #213, .T. ) ;
+#3 = LINE ( 'NONE', #76, #61 ) ;
+#4 = VECTOR ( 'NONE', #314, 39.37007874015748100 ) ;
+#5 = LINE ( 'NONE', #397, #540 ) ;
+#6 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #615, .F. ) ;
+#8 = ADVANCED_FACE ( 'NONE', ( #151 ), #568, .T. ) ;
+#9 = AXIS2_PLACEMENT_3D ( 'NONE', #473, #41, #476 ) ;
+#10 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#11 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#12 = FACE_OUTER_BOUND ( 'NONE', #320, .T. ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#14 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #265, .F. ) ;
+#17 = EDGE_LOOP ( 'NONE', ( #635, #115, #745, #377, #627, #767, #777, #179 ) ) ;
+#16 = CARTESIAN_POINT ( 'NONE',  ( 2.869525943294879000E-018, -1.966862915010152200, -0.03313708498984784700 ) ) ;
+#18 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353000E-016 ) ) ;
+#19 = EDGE_CURVE ( 'NONE', #535, #297, #170, .T. ) ;
+#20 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#21 = FACE_OUTER_BOUND ( 'NONE', #84, .T. ) ;
+#22 = LINE ( 'NONE', #593, #230 ) ;
+#23 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#24 = LINE ( 'NONE', #362, #414 ) ;
+#25 = EDGE_CURVE ( 'NONE', #311, #279, #345, .T. ) ;
+#26 = VERTEX_POINT ( 'NONE', #245 ) ;
+#27 = EDGE_LOOP ( 'NONE', ( #125, #307, #542, #489 ) ) ;
+#28 = EDGE_CURVE ( 'NONE', #681, #135, #231, .T. ) ;
+#29 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, -1.899999999999999900, -1.099999999999999900 ) ) ;
+#30 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#31 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #757 ) ;
+#32 = PLANE ( 'NONE',  #137 ) ;
+#33 = LINE ( 'NONE', #194, #292 ) ;
+#34 = ORIENTED_EDGE ( 'NONE', *, *, #552, .F. ) ;
+#36 = VERTEX_POINT ( 'NONE', #79 ) ;
+#35 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -7.512581982576723900E-017, -1.100000000000000100 ) ) ;
+#37 = ORIENTED_EDGE ( 'NONE', *, *, #126, .T. ) ;
+#38 = AXIS2_PLACEMENT_3D ( 'NONE', #563, #608, #668 ) ;
+#39 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, -2.000000000000000000, -2.449293598294705900E-016 ) ) ;
+#40 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#41 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#42 = FACE_OUTER_BOUND ( 'NONE', #47, .T. ) ;
+#43 = LINE ( 'NONE', #123, #666 ) ;
+#44 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.224646799147353000E-016, 1.000000000000000000 ) ) ;
+#45 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ;
+#46 = EDGE_CURVE ( 'NONE', #135, #787, #178, .T. ) ;
+#47 = EDGE_LOOP ( 'NONE', ( #565, #74, #496, #488 ) ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #413, .T. ) ;
+#49 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.224646799147353000E-016 ) ) ;
+#50 = AXIS2_PLACEMENT_3D ( 'NONE', #530, #763, #271 ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, -1.100000000000000100 ) ) ;
+#52 = VECTOR ( 'NONE', #459, 39.37007874015748100 ) ;
+#53 = LINE ( 'NONE', #556, #420 ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #342, .T. ) ;
+#55 = ORIENTED_EDGE ( 'NONE', *, *, #615, .T. ) ;
+#56 = PLANE ( 'NONE',  #584 ) ;
+#57 = ORIENTED_EDGE ( 'NONE', *, *, #731, .F. ) ;
+#58 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#59 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#60 = EDGE_CURVE ( 'NONE', #776, #106, #284, .T. ) ;
+#61 = VECTOR ( 'NONE', #369, 39.37007874015748100 ) ;
+#62 = PLANE ( 'NONE',  #781 ) ;
+#63 = VECTOR ( 'NONE', #770, 39.37007874015748100 ) ;
+#64 = ADVANCED_FACE ( 'NONE', ( #642 ), #687, .T. ) ;
+#65 = ORIENTED_EDGE ( 'NONE', *, *, #227, .T. ) ;
+#66 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ;
+#67 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, 0.0000000000000000000, -1.019999999999999800 ) ) ;
+#68 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.919999999999999900, 0.0000000000000000000 ) ) ;
+#69 = EDGE_CURVE ( 'NONE', #645, #577, #189, .T. ) ;
+#70 = ADVANCED_FACE ( 'NONE', ( #513 ), #461, .T. ) ;
+#71 = PLANE ( 'NONE',  #343 ) ;
+#72 = FACE_OUTER_BOUND ( 'NONE', #143, .T. ) ;
+#73 = ORIENTED_EDGE ( 'NONE', *, *, #779, .T. ) ;
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #509, .F. ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #69, .T. ) ;
+#76 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, -8.537024980200824500E-019, -0.1000000000000000200 ) ) ;
+#77 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.08000000000000000200, -0.08000000000000001600 ) ) ;
+#78 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#79 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, -2.000000000000000000, -2.449293598294705900E-016 ) ) ;
+#80 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#81 = CYLINDRICAL_SURFACE ( 'NONE', #512, 0.08000000000000000200 ) ;
+#82 = EDGE_CURVE ( 'NONE', #710, #311, #736, .T. ) ;
+#83 = FACE_OUTER_BOUND ( 'NONE', #523, .T. ) ;
+#84 = EDGE_LOOP ( 'NONE', ( #717, #96, #73, #325 ) ) ;
+#86 = VERTEX_POINT ( 'NONE', #621 ) ;
+#85 = CARTESIAN_POINT ( 'NONE',  ( -2.869525943294879000E-018, -1.966862915010152200, -1.166862915010152600 ) ) ;
+#87 = EDGE_CURVE ( 'NONE', #589, #681, #24, .T. ) ;
+#88 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#89 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#90 = FACE_OUTER_BOUND ( 'NONE', #277, .T. ) ;
+#91 = FACE_OUTER_BOUND ( 'NONE', #746, .T. ) ;
+#92 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#93 = ORIENTED_EDGE ( 'NONE', *, *, #413, .F. ) ;
+#94 = AXIS2_PLACEMENT_3D ( 'NONE', #619, #300, #251 ) ;
+#95 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -0.1500000000000000500 ) ) ;
+#96 = ORIENTED_EDGE ( 'NONE', *, *, #259, .F. ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #579, .T. ) ;
+#98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353000E-016 ) ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( 2.869525943294879000E-018, -0.03313708498984760400, -0.03313708498984761100 ) ) ;
+#100 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 6.829619984160658000E-017 ) ) ;
+#101 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.1799999999999999900, -0.1800000000000002700 ) ) ;
+#102 = VECTOR ( 'NONE', #157, 39.37007874015748100 ) ;
+#103 = VECTOR ( 'NONE', #23, 39.37007874015748100 ) ;
+#105 = EDGE_LOOP ( 'NONE', ( #37, #623, #252, #737 ) ) ;
+#104 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -6.829619984160658000E-017 ) ) ;
+#106 = VERTEX_POINT ( 'NONE', #217 ) ;
+#107 = EDGE_CURVE ( 'NONE', #395, #787, #658, .T. ) ;
+#108 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.08000000000000000200, -1.119999999999999900 ) ) ;
+#109 = PLANE ( 'NONE',  #402 ) ;
+#110 = VECTOR ( 'NONE', #329, 39.37007874015748100 ) ;
+#111 = VECTOR ( 'NONE', #223, 39.37007874015748100 ) ;
+#112 = CARTESIAN_POINT ( 'NONE',  ( 7.536131505769729000E-018, -0.03313708498984759000, -1.166862915010151900 ) ) ;
+#113 = ORIENTED_EDGE ( 'NONE', *, *, #242, .F. ) ;
+#114 = ORIENTED_EDGE ( 'NONE', *, *, #299, .T. ) ;
+#115 = ORIENTED_EDGE ( 'NONE', *, *, #453, .T. ) ;
+#116 = EDGE_CURVE ( 'NONE', #395, #144, #316, .T. ) ;
+#117 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#118 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #527 );
+#119 = VECTOR ( 'NONE', #183, 39.37007874015748100 ) ;
+#120 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #466, 'design' ) ;
+#121 = LINE ( 'NONE', #594, #207 ) ;
+#122 = EDGE_LOOP ( 'NONE', ( #503, #375, #425, #613 ) ) ;
+#123 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#124 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ;
+#125 = ORIENTED_EDGE ( 'NONE', *, *, #651, .T. ) ;
+#126 = EDGE_CURVE ( 'NONE', #311, #726, #5, .T. ) ;
+#127 = ADVANCED_FACE ( 'NONE', ( #355 ), #32, .F. ) ;
+#128 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#129 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#130 = EDGE_CURVE ( 'NONE', #327, #525, #224, .T. ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -1.899999999999999900, 0.0000000000000000000 ) ) ;
+#132 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#133 = LINE ( 'NONE', #664, #533 ) ;
+#134 = VECTOR ( 'NONE', #585, 39.37007874015748100 ) ;
+#135 = VERTEX_POINT ( 'NONE', #216 ) ;
+#136 = ORIENTED_EDGE ( 'NONE', *, *, #69, .F. ) ;
+#137 = AXIS2_PLACEMENT_3D ( 'NONE', #583, #758, #330 ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#139 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#140 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.224646799147353000E-016 ) ) ;
+#141 = VECTOR ( 'NONE', #176, 39.37007874015748100 ) ;
+#142 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#143 = EDGE_LOOP ( 'NONE', ( #416, #598, #14, #48 ) ) ;
+#144 = VERTEX_POINT ( 'NONE', #39 ) ;
+#145 = VERTEX_POINT ( 'NONE', #204 ) ;
+#146 = EDGE_CURVE ( 'NONE', #86, #486, #282, .T. ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, -2.000000000000000000, -2.449293598294705900E-016 ) ) ;
+#148 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.919999999999999900, -0.08000000000000023800 ) ) ;
+#149 = CYLINDRICAL_SURFACE ( 'NONE', #359, 0.05000000000000001000 ) ;
+#150 = EDGE_CURVE ( 'NONE', #672, #379, #392, .T. ) ;
+#151 = FACE_OUTER_BOUND ( 'NONE', #357, .T. ) ;
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #280, .T. ) ;
+#152 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353000E-016 ) ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 2.048885995248197400E-016 ) ) ;
+#155 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, 0.0000000000000000000, -1.149999999999999700 ) ) ;
+#156 = LINE ( 'NONE', #566, #439 ) ;
+#157 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#158 = VECTOR ( 'NONE', #30, 39.37007874015748100 ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #242, .T. ) ;
+#161 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#162 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, -1.899999999999999900, 0.0000000000000000000 ) ) ;
+#163 = EDGE_CURVE ( 'NONE', #753, #776, #575, .T. ) ;
+#164 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#165 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 8.537024980200822600E-018 ) ) ;
+#166 = VECTOR ( 'NONE', #614, 39.37007874015748100 ) ;
+#167 = FACE_OUTER_BOUND ( 'NONE', #17, .T. ) ;
+#168 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#169 = EDGE_CURVE ( 'NONE', #616, #479, #587, .T. ) ;
+#170 = LINE ( 'NONE', #131, #709 ) ;
+#171 = VERTEX_POINT ( 'NONE', #101 ) ;
+#172 = AXIS2_PLACEMENT_3D ( 'NONE', #155, #581, #526 ) ;
+#173 = ORIENTED_EDGE ( 'NONE', *, *, #193, .T. ) ;
+#174 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #466 ) ;
+#175 = EDGE_CURVE ( 'NONE', #318, #445, #622, .T. ) ;
+#176 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#177 = FACE_OUTER_BOUND ( 'NONE', #555, .T. ) ;
+#178 = LINE ( 'NONE', #685, #700 ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #552, .T. ) ;
+#180 = ADVANCED_FACE ( 'NONE', ( #167 ), #283, .F. ) ;
+#181 = FILL_AREA_STYLE_COLOUR ( '', #652 ) ;
+#182 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'magplate', ( #351, #761 ), #697 ) ;
+#183 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#184 = EDGE_CURVE ( 'NONE', #248, #171, #612, .T. ) ;
+#185 = ADVANCED_FACE ( 'NONE', ( #188 ), #475, .T. ) ;
+#186 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -8.537024980200822600E-018 ) ) ;
+#187 = VECTOR ( 'NONE', #132, 39.37007874015748100 ) ;
+#188 = FACE_OUTER_BOUND ( 'NONE', #661, .T. ) ;
+#189 = LINE ( 'NONE', #626, #596 ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -1.820000000000000100, -0.1800000000000002700 ) ) ;
+#191 = ORIENTED_EDGE ( 'NONE', *, *, #193, .F. ) ;
+#192 = ORIENTED_EDGE ( 'NONE', *, *, #667, .F. ) ;
+#193 = EDGE_CURVE ( 'NONE', #787, #589, #222, .T. ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.899999999999999900, -0.1000000000000000200 ) ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.899999999999999900, -0.1500000000000000500 ) ) ;
+#196 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#197 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, 2.356218894535426700E-016, -1.149999999999999700 ) ) ;
+#198 = LINE ( 'NONE', #67, #631 ) ;
+#199 = ORIENTED_EDGE ( 'NONE', *, *, #365, .F. ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #107, .T. ) ;
+#202 = EDGE_LOOP ( 'NONE', ( #582, #670, #153, #258 ) ) ;
+#201 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, -2.000000000000000000, 0.0000000000000000000 ) ) ;
+#203 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, -2.000000000000000000, -0.05000000000000025300 ) ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, -1.899999999999999900, -0.1000000000000000100 ) ) ;
+#205 = EDGE_CURVE ( 'NONE', #589, #692, #741, .T. ) ;
+#206 = VECTOR ( 'NONE', #508, 39.37007874015748100 ) ;
+#207 = VECTOR ( 'NONE', #228, 39.37007874015748100 ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #2, .F. ) ;
+#209 = ORIENTED_EDGE ( 'NONE', *, *, #107, .F. ) ;
+#210 = EDGE_CURVE ( 'NONE', #776, #145, #406, .T. ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#212 = VECTOR ( 'NONE', #98, 39.37007874015748100 ) ;
+#213 = CIRCLE ( 'NONE', #480, 0.05000000000000000300 ) ;
+#214 =( CONVERSION_BASED_UNIT ( 'INCH', #118 ) LENGTH_UNIT ( ) NAMED_UNIT ( #168 ) );
+#215 = EDGE_LOOP ( 'NONE', ( #567, #669, #57, #65, #225, #443, #467, #446, #54, #356, #541, #424, #605, #754 ) ) ;
+#216 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.919999999999999900, -0.08000000000000023800 ) ) ;
+#217 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 0.0000000000000000000, -1.100000000000000100 ) ) ;
+#218 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.08000000000000000200, -1.199999999999999700 ) ) ;
+#220 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#221 = EDGE_CURVE ( 'NONE', #36, #261, #785, .T. ) ;
+#222 = LINE ( 'NONE', #219, #715 ) ;
+#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#224 = LINE ( 'NONE', #440, #385 ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #498, .T. ) ;
+#226 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#227 = EDGE_CURVE ( 'NONE', #261, #505, #691, .T. ) ;
+#228 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#229 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 2.048885995248197700E-016 ) ) ;
+#230 = VECTOR ( 'NONE', #646, 39.37007874015748100 ) ;
+#231 = LINE ( 'NONE', #68, #679 ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, -1.899999999999999900, -1.049999999999999800 ) ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #655, .F. ) ;
+#234 = FILL_AREA_STYLE ('',( #181 ) ) ;
+#235 = ADVANCED_FACE ( 'NONE', ( #603 ), #595, .T. ) ;
+#236 = AXIS2_PLACEMENT_3D ( 'NONE', #756, #437, #637 ) ;
+#237 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#238 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #338 );
+#239 = LINE ( 'NONE', #313, #166 ) ;
+#240 = VECTOR ( 'NONE', #229, 39.37007874015748100 ) ;
+#241 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ;
+#242 = EDGE_CURVE ( 'NONE', #577, #486, #22, .T. ) ;
+#243 = EDGE_LOOP ( 'NONE', ( #415, #644, #368, #124 ) ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, -2.000000000000000000, -2.449293598294705900E-016 ) ) ;
+#245 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -1.899999999999999900, -1.049999999999999800 ) ) ;
+#246 = ADVANCED_FACE ( 'NONE', ( #83 ), #109, .T. ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -1.149999999999999700 ) ) ;
+#248 = VERTEX_POINT ( 'NONE', #713 ) ;
+#249 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #87, .F. ) ;
+#251 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#252 = ORIENTED_EDGE ( 'NONE', *, *, #471, .F. ) ;
+#253 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, -1.049999999999999800 ) ) ;
+#254 = PLANE ( 'NONE',  #472 ) ;
+#255 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, -1.100000000000000100 ) ) ;
+#256 = LINE ( 'NONE', #510, #103 ) ;
+#257 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.820000000000000100, 0.0000000000000000000 ) ) ;
+#258 = ORIENTED_EDGE ( 'NONE', *, *, #735, .F. ) ;
+#259 = EDGE_CURVE ( 'NONE', #597, #535, #775, .T. ) ;
+#261 = VERTEX_POINT ( 'NONE', #773 ) ;
+#260 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #712, .F. ) ;
+#263 = AXIS2_PLACEMENT_3D ( 'NONE', #569, #10, #310 ) ;
+#264 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 2.356218894535426700E-016, -1.149999999999999700 ) ) ;
+#265 = EDGE_CURVE ( 'NONE', #171, #486, #121, .T. ) ;
+#266 = ORIENTED_EDGE ( 'NONE', *, *, #579, .F. ) ;
+#267 = ORIENTED_EDGE ( 'NONE', *, *, #130, .F. ) ;
+#268 = ORIENTED_EDGE ( 'NONE', *, *, #651, .F. ) ;
+#269 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#270 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#271 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#272 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#273 = SURFACE_SIDE_STYLE ('',( #601 ) ) ;
+#274 = VECTOR ( 'NONE', #497, 39.37007874015748100 ) ;
+#275 = VECTOR ( 'NONE', #458, 39.37007874015748100 ) ;
+#277 = EDGE_LOOP ( 'NONE', ( #336, #113, #136, #409 ) ) ;
+#276 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#278 = ORIENTED_EDGE ( 'NONE', *, *, #630, .F. ) ;
+#279 = VERTEX_POINT ( 'NONE', #347 ) ;
+#280 = EDGE_CURVE ( 'NONE', #576, #718, #708, .T. ) ;
+#281 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, -1.919999999999999900, 0.0000000000000000000 ) ) ;
+#282 = LINE ( 'NONE', #257, #632 ) ;
+#283 = PLANE ( 'NONE',  #376 ) ;
+#284 = LINE ( 'NONE', #519, #134 ) ;
+#285 = EDGE_LOOP ( 'NONE', ( #502, #751, #266, #386 ) ) ;
+#286 = ORIENTED_EDGE ( 'NONE', *, *, #695, .T. ) ;
+#287 = SURFACE_SIDE_STYLE ('',( #465 ) ) ;
+#288 = STYLED_ITEM ( 'NONE', ( #511 ), #351 ) ;
+#289 =( CONVERSION_BASED_UNIT ( 'INCH', #306 ) LENGTH_UNIT ( ) NAMED_UNIT ( #485 ) );
+#290 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #629, #85, #438, #388 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 1.570796326794896600, 3.141592653589793100 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#291 = FACE_OUTER_BOUND ( 'NONE', #346, .T. ) ;
+#292 = VECTOR ( 'NONE', #728, 39.37007874015748100 ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #205, .T. ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.019999999999999800 ) ) ;
+#295 = ORIENTED_EDGE ( 'NONE', *, *, #308, .F. ) ;
+#296 = ADVANCED_FACE ( 'NONE', ( #549 ), #765, .T. ) ;
+#297 = VERTEX_POINT ( 'NONE', #412 ) ;
+#298 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#299 = EDGE_CURVE ( 'NONE', #327, #576, #724, .T. ) ;
+#300 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #529, #44 ) ;
+#302 = ADVANCED_FACE ( 'NONE', ( #452 ), #539, .F. ) ;
+#303 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#304 = FACE_OUTER_BOUND ( 'NONE', #366, .T. ) ;
+#305 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.899999999999999900, -1.049999999999999800 ) ) ;
+#306 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #237 );
+#307 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;
+#308 = EDGE_CURVE ( 'NONE', #726, #692, #764, .T. ) ;
+#309 = ORIENTED_EDGE ( 'NONE', *, *, #126, .F. ) ;
+#311 = VERTEX_POINT ( 'NONE', #660 ) ;
+#310 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#312 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -1.820000000000000100, -1.019999999999999800 ) ) ;
+#314 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#315 = LINE ( 'NONE', #663, #782 ) ;
+#316 = LINE ( 'NONE', #331, #550 ) ;
+#317 = PLANE ( 'NONE',  #559 ) ;
+#318 = VERTEX_POINT ( 'NONE', #361 ) ;
+#319 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ;
+#320 = EDGE_LOOP ( 'NONE', ( #693, #191, #209, #199 ) ) ;
+#321 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.919999999999999900, -1.120000000000000100 ) ) ;
+#322 = EDGE_CURVE ( 'NONE', #445, #297, #133, .T. ) ;
+#323 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, -2.000000000000000000, 0.0000000000000000000 ) ) ;
+#324 = LINE ( 'NONE', #305, #363 ) ;
+#325 = ORIENTED_EDGE ( 'NONE', *, *, #322, .T. ) ;
+#327 = VERTEX_POINT ( 'NONE', #716 ) ;
+#326 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -0.1799999999999999900, -1.019999999999999800 ) ) ;
+#328 = ORIENTED_EDGE ( 'NONE', *, *, #712, .T. ) ;
+#329 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#330 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#331 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#332 = VECTOR ( 'NONE', #684, 39.37007874015748100 ) ;
+#333 = PLANE ( 'NONE',  #641 ) ;
+#334 = ORIENTED_EDGE ( 'NONE', *, *, #150, .F. ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.899999999999999900, -1.099999999999999900 ) ) ;
+#336 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ;
+#337 = ORIENTED_EDGE ( 'NONE', *, *, #592, .F. ) ;
+#338 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#339 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#340 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, -2.000000000000000000, 0.0000000000000000000 ) ) ;
+#341 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 0.0000000000000000000, -1.199999999999999700 ) ) ;
+#342 = EDGE_CURVE ( 'NONE', #393, #106, #43, .T. ) ;
+#343 = AXIS2_PLACEMENT_3D ( 'NONE', #674, #680, #610 ) ;
+#344 = FACE_OUTER_BOUND ( 'NONE', #367, .T. ) ;
+#345 = CIRCLE ( 'NONE', #38, 0.05000000000000001000 ) ;
+#346 = EDGE_LOOP ( 'NONE', ( #293, #295, #192, #250 ) ) ;
+#347 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, -2.000000000000000000, -1.150000000000000100 ) ) ;
+#348 = ORIENTED_EDGE ( 'NONE', *, *, #731, .T. ) ;
+#349 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#350 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353000E-016, -1.000000000000000000 ) ) ;
+#351 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude4', #607 ) ;
+#352 = FACE_OUTER_BOUND ( 'NONE', #634, .T. ) ;
+#353 = CYLINDRICAL_SURFACE ( 'NONE', #573, 0.08000000000000000200 ) ;
+#354 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 0.0000000000000000000, -0.1000000000000000200 ) ) ;
+#355 = FACE_OUTER_BOUND ( 'NONE', #202, .T. ) ;
+#356 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ;
+#357 = EDGE_LOOP ( 'NONE', ( #590, #328, #7, #286, #267, #45, #334, #337 ) ) ;
+#358 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, 0.0000000000000000000, -0.1800000000000002700 ) ) ;
+#359 = AXIS2_PLACEMENT_3D ( 'NONE', #197, #733, #618 ) ;
+#360 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#361 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -0.1500000000000000500 ) ) ;
+#362 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -2.000000000000000000, -1.120000000000000100 ) ) ;
+#363 = VECTOR ( 'NONE', #11, 39.37007874015748100 ) ;
+#364 = ADVANCED_FACE ( 'NONE', ( #91 ), #720, .T. ) ;
+#365 = EDGE_CURVE ( 'NONE', #692, #395, #521, .T. ) ;
+#366 = EDGE_LOOP ( 'NONE', ( #564, #241, #727, #173 ) ) ;
+#367 = EDGE_LOOP ( 'NONE', ( #408, #34, #702, #701 ) ) ;
+#368 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ;
+#369 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 8.537024980200822600E-018 ) ) ;
+#370 = EDGE_CURVE ( 'NONE', #26, #753, #574, .T. ) ;
+#371 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, -0.1500000000000000500 ) ) ;
+#372 = LINE ( 'NONE', #35, #677 ) ;
+#373 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 0.0000000000000000000, -1.199999999999999700 ) ) ;
+#374 = LINE ( 'NONE', #264, #332 ) ;
+#375 = ORIENTED_EDGE ( 'NONE', *, *, #82, .F. ) ;
+#376 = AXIS2_PLACEMENT_3D ( 'NONE', #531, #588, #407 ) ;
+#377 = ORIENTED_EDGE ( 'NONE', *, *, #163, .T. ) ;
+#379 = VERTEX_POINT ( 'NONE', #232 ) ;
+#378 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#380 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#381 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 9.797174393178824000E-018, -0.08000000000000000200 ) ) ;
+#382 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#383 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #435 ), #628 ) ;
+#384 = VECTOR ( 'NONE', #49, 39.37007874015748100 ) ;
+#385 = VECTOR ( 'NONE', #507, 39.37007874015748100 ) ;
+#386 = ORIENTED_EDGE ( 'NONE', *, *, #772, .F. ) ;
+#387 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353000E-016, -1.000000000000000000 ) ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, -2.000000000000000000, -1.200000000000000200 ) ) ;
+#389 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #288 ) ) ;
+#390 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 6.829619984160658000E-017, 1.000000000000000000 ) ) ;
+#391 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, -1.899999999999999900, 0.0000000000000000000 ) ) ;
+#392 = LINE ( 'NONE', #391, #158 ) ;
+#393 = VERTEX_POINT ( 'NONE', #354 ) ;
+#395 = VERTEX_POINT ( 'NONE', #544 ) ;
+#394 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -7.512581982576723900E-017, -1.100000000000000100 ) ) ;
+#396 = ORIENTED_EDGE ( 'NONE', *, *, #60, .T. ) ;
+#397 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, -2.000000000000000000, -1.200000000000000200 ) ) ;
+#398 = AXIS2_PLACEMENT_3D ( 'NONE', #400, #154, #462 ) ;
+#399 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #214, 'distance_accuracy_value', 'NONE');
+#400 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 2.294752314677980900E-016, -1.119999999999999900 ) ) ;
+#401 =( CONVERSION_BASED_UNIT ( 'INCH', #238 ) LENGTH_UNIT ( ) NAMED_UNIT ( #220 ) );
+#402 = AXIS2_PLACEMENT_3D ( 'NONE', #591, #481, #771 ) ;
+#403 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#404 = LINE ( 'NONE', #759, #110 ) ;
+#405 = FACE_OUTER_BOUND ( 'NONE', #456, .T. ) ;
+#406 = LINE ( 'NONE', #162, #441 ) ;
+#407 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#408 = ORIENTED_EDGE ( 'NONE', *, *, #592, .T. ) ;
+#409 = ORIENTED_EDGE ( 'NONE', *, *, #509, .T. ) ;
+#410 = EDGE_CURVE ( 'NONE', #718, #106, #620, .T. ) ;
+#411 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, 6.123233995736765600E-018, -0.05000000000000000300 ) ) ;
+#412 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -1.899999999999999900, -0.1500000000000000500 ) ) ;
+#413 = EDGE_CURVE ( 'NONE', #479, #171, #315, .T. ) ;
+#414 = VECTOR ( 'NONE', #743, 39.37007874015748100 ) ;
+#415 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ;
+#416 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ;
+#417 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #421 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #289, #487, #298 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#418 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#419 = LINE ( 'NONE', #340, #714 ) ;
+#420 = VECTOR ( 'NONE', #6, 39.37007874015748100 ) ;
+#421 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #289, 'distance_accuracy_value', 'NONE');
+#422 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #721, .NOT_KNOWN. ) ;
+#423 = VECTOR ( 'NONE', #339, 39.37007874015748100 ) ;
+#424 = ORIENTED_EDGE ( 'NONE', *, *, #299, .F. ) ;
+#425 = ORIENTED_EDGE ( 'NONE', *, *, #755, .F. ) ;
+#426 = ADVANCED_FACE ( 'NONE', ( #344 ), #56, .T. ) ;
+#427 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#428 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #288 ), #417 ) ;
+#429 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#430 = ADVANCED_FACE ( 'NONE', ( #21 ), #62, .F. ) ;
+#431 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, -0.1000000000000000200 ) ) ;
+#432 = VECTOR ( 'NONE', #570, 39.37007874015748100 ) ;
+#433 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -0.1799999999999999900, -0.1800000000000002700 ) ) ;
+#434 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #147, #748, #16, #148 ),
+ .UNSPECIFIED., .F., .T. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 0.0000000000000000000, 1.570796326794896600 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#435 = STYLED_ITEM ( 'NONE', ( #774 ), #182 ) ;
+#436 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#437 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 2.048885995248197700E-016, -1.000000000000000000 ) ) ;
+#438 = CARTESIAN_POINT ( 'NONE',  ( 0.03313708498984758300, -2.000000000000000400, -1.200000000000000200 ) ) ;
+#439 = VECTOR ( 'NONE', #732, 39.37007874015748100 ) ;
+#440 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#441 = VECTOR ( 'NONE', #164, 39.37007874015748100 ) ;
+#442 = EDGE_CURVE ( 'NONE', #379, #327, #156, .T. ) ;
+#443 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ;
+#445 = VERTEX_POINT ( 'NONE', #371 ) ;
+#444 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, -1.049999999999999800 ) ) ;
+#446 = ORIENTED_EDGE ( 'NONE', *, *, #772, .T. ) ;
+#447 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#448 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #401, 'distance_accuracy_value', 'NONE');
+#449 = EDGE_CURVE ( 'NONE', #248, #86, #548, .T. ) ;
+#450 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, 0.0000000000000000000, -1.019999999999999800 ) ) ;
+#451 = CYLINDRICAL_SURFACE ( 'NONE', #398, 0.07999999999999996000 ) ;
+#452 = FACE_OUTER_BOUND ( 'NONE', #653, .T. ) ;
+#453 = EDGE_CURVE ( 'NONE', #379, #26, #324, .T. ) ;
+#454 = EDGE_LOOP ( 'NONE', ( #200, #159, #268, #769 ) ) ;
+#455 = ORIENTED_EDGE ( 'NONE', *, *, #735, .T. ) ;
+#456 = EDGE_LOOP ( 'NONE', ( #553, #470, #309, #786, #55, #606 ) ) ;
+#457 = SURFACE_STYLE_USAGE ( .BOTH. , #273 ) ;
+#458 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#459 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#460 = AXIS2_PLACEMENT_3D ( 'NONE', #358, #117, #360 ) ;
+#461 = PLANE ( 'NONE',  #236 ) ;
+#462 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -2.048885995248200100E-016, 1.000000000000000000 ) ) ;
+#463 = SHAPE_DEFINITION_REPRESENTATION ( #517, #182 ) ;
+#464 = FACE_BOUND ( 'NONE', #243, .T. ) ;
+#465 = SURFACE_STYLE_FILL_AREA ( #234 ) ;
+#467 = ORIENTED_EDGE ( 'NONE', *, *, #779, .F. ) ;
+#466 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#468 = ORIENTED_EDGE ( 'NONE', *, *, #630, .T. ) ;
+#469 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -8.537024980200824500E-019, -0.1000000000000000200 ) ) ;
+#470 = ORIENTED_EDGE ( 'NONE', *, *, #749, .T. ) ;
+#471 = EDGE_CURVE ( 'NONE', #710, #692, #678, .T. ) ;
+#472 = AXIS2_PLACEMENT_3D ( 'NONE', #450, #447, #742 ) ;
+#473 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, 0.0000000000000000000, -0.05000000000000000300 ) ) ;
+#474 = LINE ( 'NONE', #686, #212 ) ;
+#475 = CYLINDRICAL_SURFACE ( 'NONE', #301, 0.05000000000000000300 ) ;
+#476 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#477 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ;
+#478 = ORIENTED_EDGE ( 'NONE', *, *, #163, .F. ) ;
+#479 = VERTEX_POINT ( 'NONE', #433 ) ;
+#480 = AXIS2_PLACEMENT_3D ( 'NONE', #499, #729, #139 ) ;
+#481 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#482 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#483 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -0.1500000000000000500 ) ) ;
+#484 = VECTOR ( 'NONE', #429, 39.37007874015748100 ) ;
+#485 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#486 = VERTEX_POINT ( 'NONE', #558 ) ;
+#487 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#488 = ORIENTED_EDGE ( 'NONE', *, *, #609, .T. ) ;
+#489 = ORIENTED_EDGE ( 'NONE', *, *, #749, .F. ) ;
+#490 = SURFACE_STYLE_USAGE ( .BOTH. , #287 ) ;
+#491 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -1.899999999999999900, 0.0000000000000000000 ) ) ;
+#492 = EDGE_CURVE ( 'NONE', #145, #535, #33, .T. ) ;
+#493 = VECTOR ( 'NONE', #418, 39.37007874015748100 ) ;
+#494 = ADVANCED_FACE ( 'NONE', ( #177 ), #1, .T. ) ;
+#495 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, 2.458663194297836400E-016, -1.199999999999999700 ) ) ;
+#496 = ORIENTED_EDGE ( 'NONE', *, *, #538, .F. ) ;
+#497 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#498 = EDGE_CURVE ( 'NONE', #505, #318, #698, .T. ) ;
+#499 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, -2.000000000000000000, -0.05000000000000025300 ) ) ;
+#500 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#501 = VECTOR ( 'NONE', #436, 39.37007874015748100 ) ;
+#502 = ORIENTED_EDGE ( 'NONE', *, *, #259, .T. ) ;
+#503 = ORIENTED_EDGE ( 'NONE', *, *, #25, .F. ) ;
+#504 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ;
+#505 = VERTEX_POINT ( 'NONE', #676 ) ;
+#506 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, -1.899999999999999900, -0.1500000000000000500 ) ) ;
+#507 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#508 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#509 = EDGE_CURVE ( 'NONE', #645, #86, #239, .T. ) ;
+#510 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, 0.0000000000000000000, -0.1800000000000002700 ) ) ;
+#511 = PRESENTATION_STYLE_ASSIGNMENT (( #490 ) ) ;
+#512 = AXIS2_PLACEMENT_3D ( 'NONE', #578, #88, #20 ) ;
+#513 = FACE_OUTER_BOUND ( 'NONE', #105, .T. ) ;
+#515 = ORIENTED_EDGE ( 'NONE', *, *, #221, .T. ) ;
+#514 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -1.820000000000000100, -1.019999999999999800 ) ) ;
+#516 = ORIENTED_EDGE ( 'NONE', *, *, #453, .F. ) ;
+#517 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #747 ) ;
+#518 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#519 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, -7.512581982576723900E-017, -1.100000000000000100 ) ) ;
+#520 = CIRCLE ( 'NONE', #172, 0.05000000000000001000 ) ;
+#521 = LINE ( 'NONE', #59, #119 ) ;
+#522 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#523 = EDGE_LOOP ( 'NONE', ( #233, #516, #66, #114 ) ) ;
+#524 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #435 ) ) ;
+#525 = VERTEX_POINT ( 'NONE', #247 ) ;
+#526 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#527 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#528 = AXIS2_PLACEMENT_3D ( 'NONE', #303, #500, #378 ) ;
+#529 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 1.224646799147353000E-016 ) ) ;
+#530 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -1.820000000000000100, 0.0000000000000000000 ) ) ;
+#531 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.899999999999999900, 0.0000000000000000000 ) ) ;
+#532 = LINE ( 'NONE', #633, #602 ) ;
+#533 = VECTOR ( 'NONE', #128, 39.37007874015748100 ) ;
+#534 = ORIENTED_EDGE ( 'NONE', *, *, #342, .F. ) ;
+#535 = VERTEX_POINT ( 'NONE', #561 ) ;
+#536 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -8.537024980200824500E-019, -0.1000000000000000200 ) ) ;
+#537 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#538 = EDGE_CURVE ( 'NONE', #616, #645, #198, .T. ) ;
+#539 = PLANE ( 'NONE',  #703 ) ;
+#540 = VECTOR ( 'NONE', #639, 39.37007874015748100 ) ;
+#541 = ORIENTED_EDGE ( 'NONE', *, *, #280, .F. ) ;
+#542 = ORIENTED_EDGE ( 'NONE', *, *, #667, .T. ) ;
+#543 = AXIS2_PLACEMENT_3D ( 'NONE', #469, #600, #186 ) ;
+#544 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#545 = ADVANCED_FACE ( 'NONE', ( #304, #464 ), #71, .F. ) ;
+#546 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#547 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#548 = LINE ( 'NONE', #294, #274 ) ;
+#549 = FACE_OUTER_BOUND ( 'NONE', #285, .T. ) ;
+#550 = VECTOR ( 'NONE', #18, 39.37007874015748100 ) ;
+#551 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 9.478001694819083900E-033, -1.199999999999999700 ) ) ;
+#552 = EDGE_CURVE ( 'NONE', #297, #672, #762, .T. ) ;
+#553 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ;
+#554 = ADVANCED_FACE ( 'NONE', ( #690 ), #149, .T. ) ;
+#555 = EDGE_LOOP ( 'NONE', ( #278, #477, #625, #75 ) ) ;
+#556 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -0.1500000000000000500 ) ) ;
+#557 = ADVANCED_FACE ( 'NONE', ( #640 ), #740, .T. ) ;
+#558 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.820000000000000100, -0.1800000000000002700 ) ) ;
+#559 = AXIS2_PLACEMENT_3D ( 'NONE', #323, #78, #142 ) ;
+#560 = LINE ( 'NONE', #518, #102 ) ;
+#561 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -1.899999999999999900, -0.1000000000000000100 ) ) ;
+#562 = VECTOR ( 'NONE', #165, 39.37007874015748100 ) ;
+#563 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, -2.000000000000000000, -1.150000000000000100 ) ) ;
+#564 = ORIENTED_EDGE ( 'NONE', *, *, #87, .T. ) ;
+#565 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ;
+#567 = ORIENTED_EDGE ( 'NONE', *, *, #471, .T. ) ;
+#566 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -1.049999999999999800 ) ) ;
+#568 = PLANE ( 'NONE',  #94 ) ;
+#569 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#570 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -2.048885995248197700E-016 ) ) ;
+#571 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, 0.0000000000000000000, -1.199999999999999700 ) ) ;
+#572 = LINE ( 'NONE', #211, #52 ) ;
+#573 = AXIS2_PLACEMENT_3D ( 'NONE', #381, #152, #387 ) ;
+#574 = LINE ( 'NONE', #491, #141 ) ;
+#575 = LINE ( 'NONE', #335, #275 ) ;
+#576 = VERTEX_POINT ( 'NONE', #253 ) ;
+#577 = VERTEX_POINT ( 'NONE', #190 ) ;
+#578 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, -0.08000000000000000200, 0.0000000000000000000 ) ) ;
+#579 = EDGE_CURVE ( 'NONE', #393, #145, #3, .T. ) ;
+#580 = EDGE_CURVE ( 'NONE', #36, #144, #744, .T. ) ;
+#581 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#582 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ;
+#583 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#584 = AXIS2_PLACEMENT_3D ( 'NONE', #483, #784, #780 ) ;
+#585 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -6.829619984160658000E-017 ) ) ;
+#586 = FACE_OUTER_BOUND ( 'NONE', #454, .T. ) ;
+#587 = LINE ( 'NONE', #760, #4 ) ;
+#588 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#589 = VERTEX_POINT ( 'NONE', #738 ) ;
+#590 = ORIENTED_EDGE ( 'NONE', *, *, #498, .F. ) ;
+#591 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -1.049999999999999800 ) ) ;
+#592 = EDGE_CURVE ( 'NONE', #318, #672, #53, .T. ) ;
+#593 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -1.820000000000000100, -0.1800000000000002700 ) ) ;
+#594 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -0.1800000000000002700 ) ) ;
+#595 = CYLINDRICAL_SURFACE ( 'NONE', #675, 0.08000000000000000200 ) ;
+#596 = VECTOR ( 'NONE', #380, 39.37007874015748100 ) ;
+#597 = VERTEX_POINT ( 'NONE', #431 ) ;
+#598 = ORIENTED_EDGE ( 'NONE', *, *, #609, .F. ) ;
+#599 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#600 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -8.537024980200822600E-018, -1.000000000000000000 ) ) ;
+#601 = SURFACE_STYLE_FILL_AREA ( #643 ) ;
+#602 = VECTOR ( 'NONE', #89, 39.37007874015748100 ) ;
+#603 = FACE_OUTER_BOUND ( 'NONE', #27, .T. ) ;
+#604 = ADVANCED_FACE ( 'NONE', ( #586 ), #353, .T. ) ;
+#605 = ORIENTED_EDGE ( 'NONE', *, *, #130, .T. ) ;
+#606 = ORIENTED_EDGE ( 'NONE', *, *, #2, .T. ) ;
+#607 = CLOSED_SHELL ( 'NONE', ( #64, #730, #296, #426, #430, #246, #127, #545, #70, #557, #302, #671, #8, #554, #185, #611, #604, #783, #235, #364, #725, #662, #665, #494, #180 ) ) ;
+#608 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#609 = EDGE_CURVE ( 'NONE', #616, #248, #532, .T. ) ;
+#610 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#611 = ADVANCED_FACE ( 'NONE', ( #12 ), #81, .T. ) ;
+#612 = LINE ( 'NONE', #711, #111 ) ;
+#613 = ORIENTED_EDGE ( 'NONE', *, *, #695, .F. ) ;
+#614 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#615 = EDGE_CURVE ( 'NONE', #279, #683, #723, .T. ) ;
+#616 = VERTEX_POINT ( 'NONE', #326 ) ;
+#617 = ORIENTED_EDGE ( 'NONE', *, *, #210, .F. ) ;
+#618 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -2.048885995248195700E-016, 1.000000000000000000 ) ) ;
+#619 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#620 = LINE ( 'NONE', #51, #493 ) ;
+#621 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.820000000000000100, -1.019999999999999800 ) ) ;
+#622 = LINE ( 'NONE', #95, #63 ) ;
+#623 = ORIENTED_EDGE ( 'NONE', *, *, #308, .T. ) ;
+#625 = ORIENTED_EDGE ( 'NONE', *, *, #538, .T. ) ;
+#624 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, 0.0000000000000000000, -1.199999999999999700 ) ) ;
+#626 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -1.820000000000000100, 0.0000000000000000000 ) ) ;
+#627 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ;
+#628 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #399 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #214, #40, #92 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#629 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.919999999999999900, -1.120000000000000100 ) ) ;
+#630 = EDGE_CURVE ( 'NONE', #479, #577, #256, .T. ) ;
+#631 = VECTOR ( 'NONE', #249, 39.37007874015748100 ) ;
+#632 = VECTOR ( 'NONE', #382, 39.37007874015748100 ) ;
+#633 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -0.1799999999999999900, -1.019999999999999800 ) ) ;
+#634 = EDGE_LOOP ( 'NONE', ( #719, #478, #455, #647 ) ) ;
+#635 = ORIENTED_EDGE ( 'NONE', *, *, #150, .T. ) ;
+#636 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -1.899999999999999900, -1.099999999999999900 ) ) ;
+#637 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 2.048885995248197700E-016 ) ) ;
+#638 = PRODUCT_CONTEXT ( 'NONE', #757, 'mechanical' ) ;
+#639 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#640 = FACE_OUTER_BOUND ( 'NONE', #215, .T. ) ;
+#641 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #390, #100 ) ;
+#642 = FACE_OUTER_BOUND ( 'NONE', #659, .T. ) ;
+#644 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ;
+#643 = FILL_AREA_STYLE ('',( #696 ) ) ;
+#645 = VERTEX_POINT ( 'NONE', #514 ) ;
+#646 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#647 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ;
+#648 = AXIS2_PLACEMENT_3D ( 'NONE', #694, #260, #689 ) ;
+#649 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#650 = VECTOR ( 'NONE', #312, 39.37007874015748100 ) ;
+#651 = EDGE_CURVE ( 'NONE', #144, #135, #434, .T. ) ;
+#652 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#653 = EDGE_LOOP ( 'NONE', ( #348, #504, #319, #515 ) ) ;
+#654 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -1.049999999999999800 ) ) ;
+#655 = EDGE_CURVE ( 'NONE', #26, #576, #706, .T. ) ;
+#656 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 1.224646799147353000E-016 ) ) ;
+#657 = VECTOR ( 'NONE', #80, 39.37007874015748100 ) ;
+#658 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #13, #682, #99, #77 ),
+ .UNSPECIFIED., .F., .T. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 0.0000000000000000000, 1.570796326794896600 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#659 = EDGE_LOOP ( 'NONE', ( #97, #617, #396, #534 ) ) ;
+#660 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, -2.000000000000000000, -1.200000000000000200 ) ) ;
+#661 = EDGE_LOOP ( 'NONE', ( #766, #739, #208, #262 ) ) ;
+#662 = ADVANCED_FACE ( 'NONE', ( #42 ), #254, .F. ) ;
+#663 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -0.1799999999999999900, -0.1800000000000002700 ) ) ;
+#664 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, -0.0000000000000000000, -0.1500000000000000500 ) ) ;
+#665 = ADVANCED_FACE ( 'NONE', ( #72 ), #750, .T. ) ;
+#666 = VECTOR ( 'NONE', #547, 39.37007874015748100 ) ;
+#667 = EDGE_CURVE ( 'NONE', #681, #726, #290, .T. ) ;
+#668 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#669 = ORIENTED_EDGE ( 'NONE', *, *, #365, .T. ) ;
+#670 = ORIENTED_EDGE ( 'NONE', *, *, #655, .T. ) ;
+#671 = ADVANCED_FACE ( 'NONE', ( #405 ), #317, .F. ) ;
+#672 = VERTEX_POINT ( 'NONE', #506 ) ;
+#673 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#674 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#675 = AXIS2_PLACEMENT_3D ( 'NONE', #281, #226, #537 ) ;
+#676 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -0.05000000000000000300 ) ) ;
+#677 = VECTOR ( 'NONE', #104, 39.37007874015748100 ) ;
+#678 = LINE ( 'NONE', #373, #501 ) ;
+#679 = VECTOR ( 'NONE', #673, 39.37007874015748100 ) ;
+#680 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#681 = VERTEX_POINT ( 'NONE', #321 ) ;
+#682 = CARTESIAN_POINT ( 'NONE',  ( 0.03313708498984760400, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#683 = VERTEX_POINT ( 'NONE', #203 ) ;
+#684 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 2.048885995248197700E-016 ) ) ;
+#685 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 9.797174393178824000E-018, -0.08000000000000000200 ) ) ;
+#686 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, -2.000000000000000000, -0.05000000000000025300 ) ) ;
+#687 = PLANE ( 'NONE',  #688 ) ;
+#688 = AXIS2_PLACEMENT_3D ( 'NONE', #270, #272, #522 ) ;
+#689 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#690 = FACE_OUTER_BOUND ( 'NONE', #122, .T. ) ;
+#691 = CIRCLE ( 'NONE', #9, 0.05000000000000000300 ) ;
+#692 = VERTEX_POINT ( 'NONE', #624 ) ;
+#693 = ORIENTED_EDGE ( 'NONE', *, *, #205, .F. ) ;
+#694 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -0.1799999999999999900, 0.0000000000000000000 ) ) ;
+#695 = EDGE_CURVE ( 'NONE', #279, #525, #374, .T. ) ;
+#696 = FILL_AREA_STYLE_COLOUR ( '', #196 ) ;
+#697 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #448 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #401, #161, #705 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#698 = LINE ( 'NONE', #138, #187 ) ;
+#699 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.08000000000000000200, -0.08000000000000001600 ) ) ;
+#700 = VECTOR ( 'NONE', #140, 39.37007874015748100 ) ;
+#701 = ORIENTED_EDGE ( 'NONE', *, *, #175, .F. ) ;
+#702 = ORIENTED_EDGE ( 'NONE', *, *, #322, .F. ) ;
+#703 = AXIS2_PLACEMENT_3D ( 'NONE', #482, #350, #656 ) ;
+#704 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#705 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#706 = LINE ( 'NONE', #444, #657 ) ;
+#707 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #721 ) ) ;
+#708 = LINE ( 'NONE', #349, #423 ) ;
+#709 = VECTOR ( 'NONE', #129, 39.37007874015748100 ) ;
+#710 = VERTEX_POINT ( 'NONE', #571 ) ;
+#711 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.1799999999999999900, 0.0000000000000000000 ) ) ;
+#712 = EDGE_CURVE ( 'NONE', #505, #683, #474, .T. ) ;
+#713 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.1799999999999999900, -1.019999999999999800 ) ) ;
+#714 = VECTOR ( 'NONE', #218, 39.37007874015748100 ) ;
+#715 = VECTOR ( 'NONE', #403, 39.37007874015748100 ) ;
+#716 = CARTESIAN_POINT ( 'NONE',  ( 0.3600000000000000400, 0.0000000000000000000, -1.049999999999999800 ) ) ;
+#717 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ;
+#718 = VERTEX_POINT ( 'NONE', #255 ) ;
+#719 = ORIENTED_EDGE ( 'NONE', *, *, #60, .F. ) ;
+#720 = PLANE ( 'NONE',  #460 ) ;
+#721 = PRODUCT ( 'magplate', 'magplate', '', ( #638 ) ) ;
+#722 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#723 = LINE ( 'NONE', #201, #206 ) ;
+#724 = LINE ( 'NONE', #654, #734 ) ;
+#725 = ADVANCED_FACE ( 'NONE', ( #90 ), #752, .F. ) ;
+#726 = VERTEX_POINT ( 'NONE', #768 ) ;
+#727 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ;
+#728 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#729 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#730 = ADVANCED_FACE ( 'NONE', ( #352 ), #333, .T. ) ;
+#731 = EDGE_CURVE ( 'NONE', #261, #395, #572, .T. ) ;
+#732 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#733 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 2.048885995248197400E-016 ) ) ;
+#734 = VECTOR ( 'NONE', #599, 39.37007874015748100 ) ;
+#735 = EDGE_CURVE ( 'NONE', #753, #718, #372, .T. ) ;
+#736 = LINE ( 'NONE', #495, #432 ) ;
+#737 = ORIENTED_EDGE ( 'NONE', *, *, #82, .T. ) ;
+#739 = ORIENTED_EDGE ( 'NONE', *, *, #221, .F. ) ;
+#738 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.08000000000000000200, -1.119999999999999900 ) ) ;
+#740 = PLANE ( 'NONE',  #528 ) ;
+#741 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #108, #112, #778, #341 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 1.570796326794896800, 3.141592653589793100 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243650500, 0.8047378541243650500, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#742 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#743 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -2.048885995248197700E-016 ) ) ;
+#744 = LINE ( 'NONE', #244, #484 ) ;
+#745 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ;
+#746 = EDGE_LOOP ( 'NONE', ( #15, #93, #468, #160 ) ) ;
+#747 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #422, #120 ) ;
+#748 = CARTESIAN_POINT ( 'NONE',  ( 0.03313708498984760400, -2.000000000000000400, -2.561107494060246600E-016 ) ) ;
+#749 = EDGE_CURVE ( 'NONE', #144, #726, #419, .T. ) ;
+#750 = PLANE ( 'NONE',  #648 ) ;
+#751 = ORIENTED_EDGE ( 'NONE', *, *, #492, .F. ) ;
+#753 = VERTEX_POINT ( 'NONE', #636 ) ;
+#752 = PLANE ( 'NONE',  #50 ) ;
+#754 = ORIENTED_EDGE ( 'NONE', *, *, #755, .T. ) ;
+#755 = EDGE_CURVE ( 'NONE', #525, #710, #520, .T. ) ;
+#756 = CARTESIAN_POINT ( 'NONE',  ( 0.2000000000000000100, 2.458663194297836400E-016, -1.199999999999999700 ) ) ;
+#757 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#758 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#759 = CARTESIAN_POINT ( 'NONE',  ( 0.2600000000000000100, 0.0000000000000000000, -0.1000000000000000200 ) ) ;
+#760 = CARTESIAN_POINT ( 'NONE',  ( 0.04000000000000000100, -0.1799999999999999900, 0.0000000000000000000 ) ) ;
+#761 = AXIS2_PLACEMENT_3D ( 'NONE', #704, #276, #269 ) ;
+#762 = LINE ( 'NONE', #195, #650 ) ;
+#763 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#764 = LINE ( 'NONE', #551, #240 ) ;
+#765 = PLANE ( 'NONE',  #543 ) ;
+#766 = ORIENTED_EDGE ( 'NONE', *, *, #227, .F. ) ;
+#767 = ORIENTED_EDGE ( 'NONE', *, *, #492, .T. ) ;
+#768 = CARTESIAN_POINT ( 'NONE',  ( 0.08000000000000000200, -2.000000000000000000, -1.200000000000000200 ) ) ;
+#769 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ;
+#770 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#771 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#772 = EDGE_CURVE ( 'NONE', #597, #393, #404, .T. ) ;
+#773 = CARTESIAN_POINT ( 'NONE',  ( 0.3100000000000000500, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#774 = PRESENTATION_STYLE_ASSIGNMENT (( #457 ) ) ;
+#775 = LINE ( 'NONE', #536, #562 ) ;
+#776 = VERTEX_POINT ( 'NONE', #29 ) ;
+#777 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ;
+#778 = CARTESIAN_POINT ( 'NONE',  ( 0.03313708498984759000, -5.739051886589757200E-018, -1.199999999999999700 ) ) ;
+#779 = EDGE_CURVE ( 'NONE', #597, #445, #560, .T. ) ;
+#780 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#781 = AXIS2_PLACEMENT_3D ( 'NONE', #722, #58, #546 ) ;
+#782 = VECTOR ( 'NONE', #427, 39.37007874015748100 ) ;
+#783 = ADVANCED_FACE ( 'NONE', ( #291 ), #451, .T. ) ;
+#784 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#785 = LINE ( 'NONE', #649, #384 ) ;
+#786 = ORIENTED_EDGE ( 'NONE', *, *, #25, .T. ) ;
+#787 = VERTEX_POINT ( 'NONE', #699 ) ;
+ENDSEC;
+END-ISO-10303-21;

Firearms/Protector_9mm_v1.0-Proteus/STEP/mek_in_retainer.step

@@ -0,0 +1,360 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('mek_in_retainer.STEP',
+    '2013-11-06T01:46:23',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = LINE ( 'NONE', #169, #29 ) ;
+#2 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#3 = VERTEX_POINT ( 'NONE', #90 ) ;
+#4 = EDGE_CURVE ( 'NONE', #65, #216, #240, .T. ) ;
+#5 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#6 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#7 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #283 );
+#8 = FACE_OUTER_BOUND ( 'NONE', #200, .T. ) ;
+#9 = EDGE_LOOP ( 'NONE', ( #86, #116, #151, #247 ) ) ;
+#10 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 0.0000000000000000000, 0.5999999999999999800 ) ) ;
+#11 = ORIENTED_EDGE ( 'NONE', *, *, #341, .F. ) ;
+#12 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#13 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #17, #269 ) ;
+#14 = EDGE_LOOP ( 'NONE', ( #127, #302, #105, #41, #58, #25, #192, #276 ) ) ;
+#15 = ADVANCED_FACE ( 'NONE', ( #138 ), #33, .T. ) ;
+#16 = AXIS2_PLACEMENT_3D ( 'NONE', #196, #27, #176 ) ;
+#17 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#18 = VECTOR ( 'NONE', #248, 39.37007874015748100 ) ;
+#19 = EDGE_LOOP ( 'NONE', ( #159, #285, #59, #26 ) ) ;
+#20 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 0.0000000000000000000, -0.5399999999999999200 ) ) ;
+#22 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#23 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'mek_in_retainer', ( #61, #109 ), #139 ) ;
+#24 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#25 = ORIENTED_EDGE ( 'NONE', *, *, #222, .T. ) ;
+#26 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ;
+#27 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#28 = EDGE_CURVE ( 'NONE', #191, #245, #84, .T. ) ;
+#29 = VECTOR ( 'NONE', #115, 39.37007874015748100 ) ;
+#30 = ORIENTED_EDGE ( 'NONE', *, *, #341, .T. ) ;
+#31 = EDGE_CURVE ( 'NONE', #39, #148, #107, .T. ) ;
+#32 = EDGE_CURVE ( 'NONE', #216, #148, #158, .T. ) ;
+#33 = PLANE ( 'NONE',  #272 ) ;
+#34 = STYLED_ITEM ( 'NONE', ( #233 ), #23 ) ;
+#35 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #157 ) ;
+#36 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 0.0000000000000000000, -0.04000000000000000100 ) ) ;
+#37 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#38 = FACE_OUTER_BOUND ( 'NONE', #220, .T. ) ;
+#39 = VERTEX_POINT ( 'NONE', #316 ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.04000000000000000100 ) ) ;
+#41 = ORIENTED_EDGE ( 'NONE', *, *, #326, .F. ) ;
+#42 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #338 ) ) ;
+#43 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 0.0000000000000000000, 0.5999999999999999800 ) ) ;
+#44 = LINE ( 'NONE', #93, #18 ) ;
+#45 = SURFACE_STYLE_FILL_AREA ( #235 ) ;
+#46 = PLANE ( 'NONE',  #334 ) ;
+#47 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#48 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#49 = EDGE_CURVE ( 'NONE', #81, #172, #125, .T. ) ;
+#50 = LINE ( 'NONE', #257, #340 ) ;
+#51 = FILL_AREA_STYLE_COLOUR ( '', #214 ) ;
+#52 = ORIENTED_EDGE ( 'NONE', *, *, #106, .F. ) ;
+#53 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#54 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #207, .NOT_KNOWN. ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 0.0000000000000000000, 0.5999999999999999800 ) ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#57 = VECTOR ( 'NONE', #197, 39.37007874015748100 ) ;
+#58 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ;
+#59 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ;
+#60 = AXIS2_PLACEMENT_3D ( 'NONE', #180, #101, #24 ) ;
+#61 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude1', #206 ) ;
+#62 = SURFACE_SIDE_STYLE ('',( #45 ) ) ;
+#63 = LINE ( 'NONE', #40, #137 ) ;
+#64 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #99 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #238, #5, #89 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#65 = VERTEX_POINT ( 'NONE', #66 ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 0.0000000000000000000, 0.5999999999999999800 ) ) ;
+#67 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#68 = LINE ( 'NONE', #300, #57 ) ;
+#69 = ORIENTED_EDGE ( 'NONE', *, *, #230, .T. ) ;
+#70 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #319 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #129, #308, #153 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#71 = EDGE_CURVE ( 'NONE', #212, #191, #317, .T. ) ;
+#72 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #207 ) ) ;
+#73 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#74 = VECTOR ( 'NONE', #47, 39.37007874015748100 ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ;
+#76 = ADVANCED_FACE ( 'NONE', ( #8 ), #236, .F. ) ;
+#77 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 1.454724409448819000, -0.04000000000000000100 ) ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 1.454724409448819000, -0.04000000000000000100 ) ) ;
+#79 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#80 = LINE ( 'NONE', #164, #74 ) ;
+#81 = VERTEX_POINT ( 'NONE', #241 ) ;
+#82 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#83 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 0.0000000000000000000, 0.5999999999999999800 ) ) ;
+#84 = LINE ( 'NONE', #88, #178 ) ;
+#85 = EDGE_CURVE ( 'NONE', #245, #130, #342, .T. ) ;
+#86 = ORIENTED_EDGE ( 'NONE', *, *, #230, .F. ) ;
+#87 = EDGE_LOOP ( 'NONE', ( #262, #281, #296, #133 ) ) ;
+#88 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 1.454724409448819000, -0.5399999999999999200 ) ) ;
+#89 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#90 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 1.454724409448819000, -0.5399999999999999200 ) ) ;
+#91 = LINE ( 'NONE', #292, #327 ) ;
+#92 = VECTOR ( 'NONE', #286, 39.37007874015748100 ) ;
+#93 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5999999999999999800 ) ) ;
+#94 = ADVANCED_FACE ( 'NONE', ( #312 ), #46, .T. ) ;
+#95 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ;
+#96 = ORIENTED_EDGE ( 'NONE', *, *, #255, .T. ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5999999999999999800 ) ) ;
+#99 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #238, 'distance_accuracy_value', 'NONE');
+#100 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#101 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#102 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#103 = ORIENTED_EDGE ( 'NONE', *, *, #136, .F. ) ;
+#104 = PLANE ( 'NONE',  #60 ) ;
+#105 = ORIENTED_EDGE ( 'NONE', *, *, #156, .F. ) ;
+#106 = EDGE_CURVE ( 'NONE', #266, #212, #91, .T. ) ;
+#107 = LINE ( 'NONE', #289, #195 ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ;
+#109 = AXIS2_PLACEMENT_3D ( 'NONE', #56, #53, #260 ) ;
+#110 = EDGE_CURVE ( 'NONE', #3, #190, #1, .T. ) ;
+#111 = LINE ( 'NONE', #98, #239 ) ;
+#112 = VECTOR ( 'NONE', #313, 39.37007874015748100 ) ;
+#113 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#114 = PLANE ( 'NONE',  #13 ) ;
+#115 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #49, .F. ) ;
+#117 = AXIS2_PLACEMENT_3D ( 'NONE', #198, #229, #280 ) ;
+#118 = LINE ( 'NONE', #211, #244 ) ;
+#119 = EDGE_LOOP ( 'NONE', ( #232, #103, #213, #226 ) ) ;
+#120 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#121 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 0.0000000000000000000, -0.04000000000000000100 ) ) ;
+#122 = EDGE_CURVE ( 'NONE', #130, #155, #291, .T. ) ;
+#123 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#124 = LINE ( 'NONE', #83, #265 ) ;
+#125 = LINE ( 'NONE', #36, #112 ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 0.0000000000000000000, 0.5999999999999999800 ) ) ;
+#127 = ORIENTED_EDGE ( 'NONE', *, *, #175, .F. ) ;
+#128 = PLANE ( 'NONE',  #315 ) ;
+#129 =( CONVERSION_BASED_UNIT ( 'INCH', #7 ) LENGTH_UNIT ( ) NAMED_UNIT ( #73 ) );
+#130 = VERTEX_POINT ( 'NONE', #189 ) ;
+#131 = EDGE_CURVE ( 'NONE', #212, #328, #80, .T. ) ;
+#132 = VECTOR ( 'NONE', #321, 39.37007874015748100 ) ;
+#133 = ORIENTED_EDGE ( 'NONE', *, *, #136, .T. ) ;
+#134 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#135 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#136 = EDGE_CURVE ( 'NONE', #3, #130, #275, .T. ) ;
+#137 = VECTOR ( 'NONE', #249, 39.37007874015748100 ) ;
+#138 = FACE_OUTER_BOUND ( 'NONE', #9, .T. ) ;
+#139 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #186 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #254, #227, #339 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#140 = VECTOR ( 'NONE', #22, 39.37007874015748100 ) ;
+#141 = ADVANCED_FACE ( 'NONE', ( #256 ), #114, .T. ) ;
+#142 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#143 = EDGE_CURVE ( 'NONE', #190, #155, #219, .T. ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#145 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#146 = ADVANCED_FACE ( 'NONE', ( #38 ), #221, .F. ) ;
+#147 = VECTOR ( 'NONE', #330, 39.37007874015748100 ) ;
+#148 = VERTEX_POINT ( 'NONE', #78 ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#150 = AXIS2_PLACEMENT_3D ( 'NONE', #201, #123, #48 ) ;
+#151 = ORIENTED_EDGE ( 'NONE', *, *, #156, .T. ) ;
+#152 = SURFACE_STYLE_USAGE ( .BOTH. , #307 ) ;
+#153 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#154 = VECTOR ( 'NONE', #120, 39.37007874015748100 ) ;
+#155 = VERTEX_POINT ( 'NONE', #10 ) ;
+#156 = EDGE_CURVE ( 'NONE', #81, #216, #63, .T. ) ;
+#157 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #54, #166 ) ;
+#158 = LINE ( 'NONE', #160, #183 ) ;
+#159 = ORIENTED_EDGE ( 'NONE', *, *, #222, .F. ) ;
+#160 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 0.0000000000000000000, -0.04000000000000000100 ) ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.04000000000000000100 ) ) ;
+#162 = ORIENTED_EDGE ( 'NONE', *, *, #49, .T. ) ;
+#163 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#164 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#165 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #34 ) ) ;
+#166 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #182, 'design' ) ;
+#167 = ORIENTED_EDGE ( 'NONE', *, *, #31, .F. ) ;
+#168 = EDGE_CURVE ( 'NONE', #191, #3, #118, .T. ) ;
+#169 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 1.454724409448819000, 0.0000000000000000000 ) ) ;
+#170 = SHAPE_DEFINITION_REPRESENTATION ( #35, #23 ) ;
+#171 = VECTOR ( 'NONE', #336, 39.37007874015748100 ) ;
+#172 = VERTEX_POINT ( 'NONE', #77 ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 1.454724409448819000, -0.5399999999999999200 ) ) ;
+#174 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#175 = EDGE_CURVE ( 'NONE', #65, #155, #44, .T. ) ;
+#176 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#177 = FACE_OUTER_BOUND ( 'NONE', #318, .T. ) ;
+#178 = VECTOR ( 'NONE', #263, 39.37007874015748100 ) ;
+#179 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #228 ) ;
+#180 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#181 = VECTOR ( 'NONE', #113, 39.37007874015748100 ) ;
+#182 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#183 = VECTOR ( 'NONE', #2, 39.37007874015748100 ) ;
+#184 = LINE ( 'NONE', #149, #171 ) ;
+#185 = EDGE_LOOP ( 'NONE', ( #167, #96, #97, #273, #75, #52, #293, #69 ) ) ;
+#186 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #254, 'distance_accuracy_value', 'NONE');
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ;
+#188 = FILL_AREA_STYLE_COLOUR ( '', #305 ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 0.0000000000000000000, -0.5399999999999999200 ) ) ;
+#190 = VERTEX_POINT ( 'NONE', #243 ) ;
+#191 = VERTEX_POINT ( 'NONE', #271 ) ;
+#192 = ORIENTED_EDGE ( 'NONE', *, *, #85, .T. ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#194 = FACE_OUTER_BOUND ( 'NONE', #14, .T. ) ;
+#195 = VECTOR ( 'NONE', #287, 39.37007874015748100 ) ;
+#196 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.454724409448819000, 0.0000000000000000000 ) ) ;
+#197 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#199 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #337 );
+#200 = EDGE_LOOP ( 'NONE', ( #323, #282, #187, #30 ) ) ;
+#201 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 1.454724409448819000, 0.0000000000000000000 ) ) ;
+#202 = VECTOR ( 'NONE', #242, 39.37007874015748100 ) ;
+#203 = EDGE_CURVE ( 'NONE', #258, #328, #111, .T. ) ;
+#204 = ORIENTED_EDGE ( 'NONE', *, *, #217, .F. ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #314, .F. ) ;
+#206 = CLOSED_SHELL ( 'NONE', ( #141, #325, #94, #250, #146, #299, #295, #15, #76, #246 ) ) ;
+#207 = PRODUCT ( 'mek_in_retainer', 'mek_in_retainer', '', ( #284 ) ) ;
+#208 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#209 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.5399999999999999200 ) ) ;
+#210 = VECTOR ( 'NONE', #145, 39.37007874015748100 ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.454724409448819000, -0.5399999999999999200 ) ) ;
+#212 = VERTEX_POINT ( 'NONE', #193 ) ;
+#213 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ;
+#214 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #217, .T. ) ;
+#216 = VERTEX_POINT ( 'NONE', #121 ) ;
+#217 = EDGE_CURVE ( 'NONE', #258, #266, #270, .T. ) ;
+#218 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#219 = LINE ( 'NONE', #218, #181 ) ;
+#220 = EDGE_LOOP ( 'NONE', ( #288, #11, #108, #343 ) ) ;
+#221 = PLANE ( 'NONE',  #264 ) ;
+#222 = EDGE_CURVE ( 'NONE', #328, #245, #231, .T. ) ;
+#223 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 1.454724409448819000, 0.0000000000000000000 ) ) ;
+#224 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#225 = SURFACE_STYLE_FILL_AREA ( #253 ) ;
+#226 = ORIENTED_EDGE ( 'NONE', *, *, #143, .T. ) ;
+#227 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#228 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#229 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#230 = EDGE_CURVE ( 'NONE', #172, #148, #68, .T. ) ;
+#231 = LINE ( 'NONE', #144, #210 ) ;
+#232 = ORIENTED_EDGE ( 'NONE', *, *, #122, .F. ) ;
+#233 = PRESENTATION_STYLE_ASSIGNMENT (( #152 ) ) ;
+#234 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #290 );
+#235 = FILL_AREA_STYLE ('',( #188 ) ) ;
+#236 = PLANE ( 'NONE',  #311 ) ;
+#237 = SURFACE_STYLE_USAGE ( .BOTH. , #62 ) ;
+#238 =( CONVERSION_BASED_UNIT ( 'INCH', #234 ) LENGTH_UNIT ( ) NAMED_UNIT ( #297 ) );
+#239 = VECTOR ( 'NONE', #274, 39.37007874015748100 ) ;
+#240 = LINE ( 'NONE', #208, #92 ) ;
+#241 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 0.0000000000000000000, -0.04000000000000000100 ) ) ;
+#242 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#243 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#244 = VECTOR ( 'NONE', #163, 39.37007874015748100 ) ;
+#245 = VERTEX_POINT ( 'NONE', #21 ) ;
+#246 = ADVANCED_FACE ( 'NONE', ( #177 ), #303, .T. ) ;
+#247 = ORIENTED_EDGE ( 'NONE', *, *, #32, .T. ) ;
+#248 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#249 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#250 = ADVANCED_FACE ( 'NONE', ( #301 ), #128, .T. ) ;
+#251 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#252 = PLANE ( 'NONE',  #16 ) ;
+#253 = FILL_AREA_STYLE ('',( #51 ) ) ;
+#254 =( CONVERSION_BASED_UNIT ( 'INCH', #199 ) LENGTH_UNIT ( ) NAMED_UNIT ( #12 ) );
+#255 = EDGE_CURVE ( 'NONE', #39, #190, #50, .T. ) ;
+#256 = FACE_OUTER_BOUND ( 'NONE', #306, .T. ) ;
+#257 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#258 = VERTEX_POINT ( 'NONE', #126 ) ;
+#259 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #182 ) ;
+#260 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#261 = FACE_OUTER_BOUND ( 'NONE', #119, .T. ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #85, .F. ) ;
+#263 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#264 = AXIS2_PLACEMENT_3D ( 'NONE', #135, #100, #142 ) ;
+#265 = VECTOR ( 'NONE', #304, 39.37007874015748100 ) ;
+#266 = VERTEX_POINT ( 'NONE', #251 ) ;
+#267 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 1.454724409448819000, 0.0000000000000000000 ) ) ;
+#268 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#269 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#270 = LINE ( 'NONE', #43, #154 ) ;
+#271 = CARTESIAN_POINT ( 'NONE',  ( -0.2199999999999999500, 1.454724409448819000, -0.5399999999999999200 ) ) ;
+#272 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #268, #37 ) ;
+#273 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ;
+#274 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#275 = LINE ( 'NONE', #173, #132 ) ;
+#276 = ORIENTED_EDGE ( 'NONE', *, *, #122, .T. ) ;
+#277 = ORIENTED_EDGE ( 'NONE', *, *, #326, .T. ) ;
+#278 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #338 ), #64 ) ;
+#279 = PLANE ( 'NONE',  #150 ) ;
+#280 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#281 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;
+#282 = ORIENTED_EDGE ( 'NONE', *, *, #32, .F. ) ;
+#283 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#284 = PRODUCT_CONTEXT ( 'NONE', #228, 'mechanical' ) ;
+#285 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ;
+#286 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#287 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#288 = ORIENTED_EDGE ( 'NONE', *, *, #255, .F. ) ;
+#289 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 1.454724409448819000, 0.0000000000000000000 ) ) ;
+#290 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#291 = LINE ( 'NONE', #294, #202 ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #314, .T. ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( 0.8199999999999999500, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#295 = ADVANCED_FACE ( 'NONE', ( #194 ), #104, .F. ) ;
+#296 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ;
+#297 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#298 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #34 ), #70 ) ;
+#299 = ADVANCED_FACE ( 'NONE', ( #333 ), #252, .T. ) ;
+#300 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.454724409448819000, -0.04000000000000000100 ) ) ;
+#301 = FACE_OUTER_BOUND ( 'NONE', #19, .T. ) ;
+#302 = ORIENTED_EDGE ( 'NONE', *, *, #4, .T. ) ;
+#303 = PLANE ( 'NONE',  #117 ) ;
+#304 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#305 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#306 = EDGE_LOOP ( 'NONE', ( #335, #215, #324, #95 ) ) ;
+#307 = SURFACE_SIDE_STYLE ('',( #225 ) ) ;
+#308 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#309 = VECTOR ( 'NONE', #320, 39.37007874015748100 ) ;
+#310 = PRESENTATION_STYLE_ASSIGNMENT (( #237 ) ) ;
+#311 = AXIS2_PLACEMENT_3D ( 'NONE', #134, #6, #67 ) ;
+#312 = FACE_OUTER_BOUND ( 'NONE', #87, .T. ) ;
+#313 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#314 = EDGE_CURVE ( 'NONE', #266, #172, #322, .T. ) ;
+#315 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #82, #102 ) ;
+#316 = CARTESIAN_POINT ( 'NONE',  ( 0.6400000000000000100, 1.454724409448819000, 0.5999999999999999800 ) ) ;
+#317 = LINE ( 'NONE', #267, #309 ) ;
+#318 = EDGE_LOOP ( 'NONE', ( #205, #204, #277, #162 ) ) ;
+#319 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #129, 'distance_accuracy_value', 'NONE');
+#320 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#321 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#322 = LINE ( 'NONE', #332, #140 ) ;
+#323 = ORIENTED_EDGE ( 'NONE', *, *, #31, .T. ) ;
+#324 = ORIENTED_EDGE ( 'NONE', *, *, #106, .T. ) ;
+#325 = ADVANCED_FACE ( 'NONE', ( #261 ), #279, .T. ) ;
+#326 = EDGE_CURVE ( 'NONE', #258, #81, #184, .T. ) ;
+#327 = VECTOR ( 'NONE', #329, 39.37007874015748100 ) ;
+#328 = VERTEX_POINT ( 'NONE', #55 ) ;
+#329 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#330 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#331 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.454724409448819000, -0.5399999999999999200 ) ) ;
+#332 = CARTESIAN_POINT ( 'NONE',  ( -0.03999999999999996600, 1.454724409448819000, -0.0000000000000000000 ) ) ;
+#333 = FACE_OUTER_BOUND ( 'NONE', #185, .T. ) ;
+#334 = AXIS2_PLACEMENT_3D ( 'NONE', #331, #174, #20 ) ;
+#335 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ;
+#336 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#337 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#338 = STYLED_ITEM ( 'NONE', ( #310 ), #61 ) ;
+#339 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#340 = VECTOR ( 'NONE', #224, 39.37007874015748100 ) ;
+#341 = EDGE_CURVE ( 'NONE', #65, #39, #124, .T. ) ;
+#342 = LINE ( 'NONE', #209, #147 ) ;
+#343 = ORIENTED_EDGE ( 'NONE', *, *, #143, .F. ) ;
+ENDSEC;
+END-ISO-10303-21;