mirror of https://github.com/maduce/fosscad-repo.git synced 2024-09-19 16:45:13 -04:00

History

ma duce 062a1f4a3a Upgrading Trantor R224 to version 1.25 by neomohist.		2013-08-25 00:45:06 -05:00
..
DXF	Upgrading Trantor R224 to version 1.25 by neomohist.	2013-08-25 00:45:06 -05:00
Renders	Upgrading Trantor R224 to version 1.25 by neomohist.	2013-08-25 00:45:06 -05:00
SLDPRT	Upgrading Trantor R224 to version 1.25 by neomohist.	2013-08-25 00:45:06 -05:00
STEP	Upgrading Trantor R224 to version 1.25 by neomohist.	2013-08-25 00:45:06 -05:00
STL	Upgrading Trantor R224 to version 1.25 by neomohist.	2013-08-25 00:45:06 -05:00
README.md	Upgrading Trantor R224 to version 1.25 by neomohist.	2013-08-25 00:45:06 -05:00

README.md

Trantor Trantor Revolver 224

Version

v1.25

Description

A nail (perhaps an 8d/10 gauge or 10d/9 gauge one) can be inserted in the tube above the system for use as a firing pin. For additional assembly information, see enclosed picture files. 5 frame pins are required, as well as glue. Formats included are STL, DXF, STEP, and SLDPRT.

Notes

Simulations indicate that .22 Short may function, but more than one use of .22 LR may cause deformation. For more information, see "Simulated Testing of a 3D Printed Revolver Cylinder" by J LaRocco, 2013 (http://www.peerevaluation.org/read/libraryID:29812)

Disclaimer

Trantor 224 v.1.25 is released under a GPL license for research and non-profit use. No warranty of any sort is issued. For US legal requirements, a piece of metal can be epoxied into the space above the trigger (within the frame), and beneath the mainspring. Also be aware of individual state laws. This system was designed as a research tool. If fabricated, be aware of local laws. Likewise, components can be made out of metal instead of polymers. Again, no warranty is issued. All usage is done at individual risk.