mirror of
https://github.com/maduce/fosscad-repo.git
synced 2024-09-19 16:45:13 -04:00
fixing typos.
This commit is contained in:
parent
2f89c52485
commit
ed07b3b535
@ -1,4 +1,4 @@
|
||||
# FOSSCAD Trigger Module (rev5)
|
||||
# FOSSCAD Trigger Module (rev 5)
|
||||
|
||||
#### Author
|
||||
|
||||
@ -6,4 +6,4 @@ shadowfall
|
||||
|
||||
#### Description
|
||||
|
||||
This is the FOSSCAD Triger Module revision 5, (see Renders/module_assembled-printed.jpg). The module provides a 3d drop in FCG for FOSSCAD compatible AR plateforms. it requires that you use a AR-15 parts kits. You can then assemble said parts into the module and install it into a FOSSCAD compatible lower receiver. The module requires a 3mm cross pin to hold it in place (see crosspin.stl) which can be printed, however, a metal cross pin is recommended. This pin should be as long as the outside of the receiver.
|
||||
This is the FOSSCAD Triger Module revision 5 (see Renders/module_assembled-printed.jpg). The module provides a 3d drop in FCG for FOSSCAD compatible AR plateforms. it requires that you use a AR-15 parts kits. You can then assemble said parts into the module and install it into a FOSSCAD compatible lower receiver. The module requires a 3mm cross pin to hold it in place (see crosspin.stl) which can be printed, however, a metal cross pin is recommended. This pin should be as long as the outside of the receiver.
|
||||
|
Loading…
Reference in New Issue
Block a user