mirror of
https://github.com/maduce/fosscad-repo.git
synced 2024-09-19 16:45:13 -04:00
23 lines
854 B
Markdown
23 lines
854 B
Markdown
# Caleb AR-10 Receiver
|
|
|
|
#### Version
|
|
1.0
|
|
|
|
#### Author
|
|
WarFairy
|
|
|
|
#### Description
|
|
This is an AR-10 receiver. It will not work with AR-15 uppers. It is DPMS pattern. Bolt hold open has been deleted on this lower receiver, so any AR-15 lower parts kit can be used to build it out. Ensure any parts kit installed has been rated for AR-10 use.
|
|
|
|
#### Printing
|
|
|
|
Highly recommended to print as a single part due to the increased forces involved with the AR-10. Cold Acetone treatment is highly recommended post-printing to get the most solid part possible.
|
|
|
|
#### Notes
|
|
|
|
For any complaints, recommendations, praise and death threats, please contact WarFairy on the #fosscad IRC on irc.oftc.net, or join us at www.fosscad.org/fc/chat
|
|
|
|
#### Credits
|
|
|
|
Credit to LTS for the base receiver, JT and Shadowfall for the buffer tower reinforcement.
|