mirror of
https://github.com/maduce/fosscad-repo.git
synced 2024-09-19 16:45:13 -04:00
34 lines
978 B
Markdown
34 lines
978 B
Markdown
# N0mad's madsen m50 short magazine extension
|
|
|
|
#### Author
|
|
n0mad
|
|
|
|
#### Version
|
|
8.0
|
|
|
|
#### License
|
|
Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3).
|
|
|
|
#### Release Date
|
|
2018/09/18
|
|
|
|
#### Description
|
|
This is a two part magazine extension for madsen m50 magazines.
|
|
|
|
#### Test Record
|
|
This was tested on with a madsen m50 submachine gun. As of version 8 it feeds and runs when loaded up to 40 rounds (+8 rounds).
|
|
|
|
#### Printing
|
|
* All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
|
|
* No support material needed.
|
|
* Print both pieces on their back to prevent the use of supports.
|
|
|
|
#### Finishing
|
|
* Aquire four bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish.
|
|
* Drill out holes to fit bolt size.
|
|
* Existing factory springs will work.
|
|
* Clamp around magazine bolt down, no floor plate needed.
|
|
|
|
#### DISCLAIMER
|
|
Use this information at your own risk and responsibility.
|