fosscad/Rifles/Madsen_M-50-Magazine_Extension_Short-n0mad/README.MD

N0mad's madsen m50 short magazine extension

Author

n0mad

Version

8.0

License

Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3).

Release Date

2018/09/18

Description

This is a two part magazine extension for madsen m50 magazines.

Test Record

This was tested on with a madsen m50 submachine gun. As of version 8 it feeds and runs when loaded up to 40 rounds (+8 rounds).

Printing

• All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
• No support material needed.
• Print both pieces on their back to prevent the use of supports.

Finishing

• Aquire four bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish.
• Drill out holes to fit bolt size.
• Existing factory springs will work.
• Clamp around magazine bolt down, no floor plate needed.

DISCLAIMER

Use this information at your own risk and responsibility.