mirror of
https://github.com/maduce/fosscad-repo.git
synced 2024-09-19 16:45:13 -04:00
1.3 KiB
1.3 KiB
N0mad's madsen m50 extra long magazine extension
Author
n0mad
Version
8.0
License
Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3).
Release Date
2018/09/18
Description
This is a two part magazine extension for madsen m50 magazines.
Test Record
This was tested on with a madsen m50 submachine gun. As of version 8 it feeds and runs when loaded up to 49 rounds (+17).
Printing
- All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
- No support material needed
- Print both pieces on their backs to preven the need of infill.
- Print barrel standing on it rear end.
Finishing
- Aquire six bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish.
- Drill out holes to fit bolt size.
- A longer magazine spring will be required. This extension should work with extended glock springs.
- I used the one found here. https://taccom3g.com/product/taccom-spring-kits/ The bolts and chicago screws will also work.
- The existing follower will need to be removed and affixed the the glock spring.
- Clamp around magazine bolt down, no floor plate needed.
DISCLAIMER
Use this information at your own risk and responsibility.