mirror of
https://github.com/maduce/fosscad-repo.git
synced 2024-09-19 16:45:13 -04:00
27 lines
1.1 KiB
Markdown
27 lines
1.1 KiB
Markdown
# Vanguard AR-15 Receiver
|
|
|
|
#### Author
|
|
shadowfall
|
|
|
|
#### Version
|
|
1.2
|
|
|
|
#### Description
|
|
The Vanguard series is designed to minimize support material and add ease of printing to the lower design. #### Instructions Set support settings to .40 (40 degrees). If your printer cannot print 40 degree overhangs a higher number may be chosen, this will increase printing time. An 8" build platform is required for this version. The model should be oriented horizontally as seen in the renders.
|
|
|
|
#### Changelog Vanguard 1.2
|
|
*fixed overhang in trigger pocket so trigger springs function
|
|
*smoothed rough edges near bolt hold open.
|
|
|
|
#### Changelog Vanguard 1.1
|
|
* fixed cosmetic defects near mag release
|
|
|
|
#### Changelog Vanguard 1.0
|
|
* based off the hermes 1.3.3 model
|
|
* increased depth of front take down lug recess.
|
|
* removed portions of the bottom of the trigger pocket -added spring guides for the trigger.
|
|
* expanded buffer end plate hole.
|
|
* redesigned magwell profile for ease of printing.
|
|
* removed majority of fillets.
|
|
* reprofiled the buffer reinforcement to reduce support required.
|